• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.1
• /
• pp.99-106
• /
• 2005

Skin is continously exposed to ultraviolet (UV) radiation, the major cause of skin disorders including skin aging. Chlorophylls were well known as photosensitizer initiating subsequent chemical reactions such as photooxidative deterioration of cellular structures. This experiment was designed to elucidate the effects of $\beta$-carotene and ascorbic acid with chlorophylls on UVB-induced photooxidation in linoleic acid emulsion model system and skin homogenate of ICR mouse. In linoleic acid emulsion model system, the addition of chlorophyll and $\beta$-carotene accelerated the photooxidation, while high concentration of ascorbic acid prevented. The combination of chlorophylls, $\beta$-carotene and ascorbic acid, which concentrations are simplified from mustard leaf kimchi, prevented UVB-induced photooxidation. Although single treatment of $\beta$-caretene accelerated photooxidaiton, $\beta$-caretene acted as antioxidant in the combination with ascorbic acid. Similarly the addition of individual chlorophylls and $\beta$-carotene accelerated the UVB-induced photooxidation in skin homogenate of ICR mouse. 50 ppm of ascorbic acid did not show the any preventive effect, however 500 ppm of ascorbic acid effectively prevented the oxidation. Photooxidation was prevented in the combination of chlorophylls and $\beta$-carotene with 500 ppm of ascorbic acid and concentration rate of ascorbic acid plays an important role in the prevention of UVB-induced photooxidation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.677-685
• /
• 2014

A direct carbon fuel cell (DCFC) generates electricity directly by converting the chemical energy in coal. In particular, a DCFC system with a solid oxide electrolyte and molten carbonate anode media has been proposed by SRI. In this system, however, there are conflicting effects of temperature, which enhances the ion conductivity of the solid electrolyte and reactivity at the electrodes while causing a stability problem for the anode media. In this study, the effect of temperature on the stability of a carbon-carbonate mixture was investigated experimentally. TGA analysis was conducted under either nitrogen or carbon dioxide ambient for $Li_2CO_3$, $K_2CO_3$, and their mixtures with carbon black. The composition of the exit gas was also monitored during temperature elevation. A simplified reaction model was suggested by considering the decomposition of carbonates and the catalyzed Boudouard reactions. The suggested model could well explain both the measured weight loss of the mixture and the gas formation from it.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1057-1068
• /
• 2014

This paper proposes elastic-plastic constitutive relations for a composite material with two phases-inclusion and matrix phases-using a homogenization scheme. A thermodynamic framework is employed to develop non-local plasticity constitutive relations, which are specifically represented in terms of the second-order gradient terms of the internal state variables. A combined two back-stress evolution equation is also established and the degradation of the state and internal variables is expressed by continuum damage mechanics in terms of the damage factor. Then, deformation localization is analyzed; the analysis results show that the proposed model yields a wide range of shear band formation behaviors depending on the evolution of the specific internal state variables. The analysis results also show good agreement with the results of simplified Rice instability analyses.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2011

This study investigates the performance of composite (steel-concrete) frame structures through numerical experiments on individual connections. The innovative aspects of this research are in the use of connections between steel beams and concrete-filled tube (CFT)columns that utilize a combination of low-carbon steel and shape memory alloy (SMA) components. In these new connections, the intent is to utilize the recentering provided by super-elastic shape memory alloy tension bars to reduce building damage and residual drift after a major earthquake. The low-carbon steel components provide excellent energy dissipation. The analysis and design of these structures is complicated because the connections cannot be modeled as being simply pins or full fixity ones they are partial restraint (PR). A refined finite element (FE) model with sophisticated three dimensional (3D) solid elements was developed to conduct numerical experiments on PR-CFT joints to obtain the global behavior of the connection. Based on behavioral information obtained from these FE tests, simplified connection models were formulated by using joint elements with spring components. The behavior of entire frames under cyclic loads was conducted and compared with the monotonic behavior obtained from the 3D FE simulations. Good agreement was found between the simple and sophisticated models, verifying the robustness of the approach.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.472-477
• /
• 2003

멸종위기종의 서식지를 효율적으로 관리하기 위해서는 해당 종의 서식 가능한 지역의 분포를 알아야 한다. 본 연구의 목적은 GIS와 퍼지집합을 이용하여 산양(Nemorhaedus caudatus)의 서식지적합성모형을 개발하여 멸종 위기종의 서식지를 관리하기 위한 정보를 제공하는 것이다. 산양의 서식지적합성모형 개발을 위한 본 연구의 주요내용은 다음과 같다. 첫째, 산양 서식지 이용에 관한 기존 연구를 바탕으로 산양의 잠재적 서식지 환경변수를 분류하였으며, 분석 대상지의 산양 흔적 조사를 통해 서식지 환경변수의 재분류 및 x²검정(Chi-square test)을 통한 변수들의 유용성을 파악하고, 쌍체비교를 통한 환경변수별 가중치를 계산하였다. 둘째, 기존 부울논리(boolean logic)의 단점을 보완하기 위해 현장 조사의 결과를 바탕으로 퍼지논리(fuzzy logic)에 의한 산양 서식지의 각 환경변수별 주제도를 작성하고, 주제도들의 상관관계를 분석하여 상호 관련성이 높은 변수들의 중복을 피하였다. 셋째, 환경변수별 주제도와 변수별 가중치를 바탕으로 다기준평가기법(MCE, Multi-Criteria Evaluation)을 이용하여 분석대상지의 산양 서식지적합성모형을 개발하였다. 마지막으로, 개발된 서식지적합성모형의 타당성을 검증하기 위해 분석대상지 외부 지역을 대상으로 검증을 실시하였다. 분석 결과 분석대상지의 분류정확도는 서식가능성 0.5를 기준으로 93.94%의 매우 높은 분류정확도를 나타내었으며, 검증대상지에서는 95.74%의 분류정확도를 나타내어 본 모형의 분류정확도는 일관성이 높은 것으로 판단되었다. 또한 전체 공원구역에서 서식가능성 0.5이상의 면적은 59%를 차지하였다.퇴적이 우세한 것으로 관측되었다.보체계의 구축사업의 시각이 행정정보화, 생활정보화, 산업정보화 등 다양한 분야와 결합하여 보다 큰 시너지 효과와 사용자 중심의 서비스 개선을 창출할 수 있는 기반을 제공할 것을 기대해 본다.. 이상의 결과를 종합해볼 때, ${\beta}$-glucan은 고용량일 때 직접적으로 또는 $IFN-{\gamma}$ 존재시에는 저용량에서도 복강 큰 포식세로를 활성화시킬 뿐 아니라, 탐식효율도 높임으로써 면역기능을 증진 시키는 것으로 나타났고, 그 효과는 crude ${\beta}$-glucan의 추출조건에 따라 달라지는 것을 알 수 있었다.eveloped. Design concepts and control methods of a new crane will be introduced in this paper.and momentum balance was applied to the fluid field of bundle. while the movement of′ individual material was taken into account. The constitutive model relating the surface force and the deformation of bundle was introduced by considering a representative prodedure that stands for the bundle movement. Then a fundamental equations system could be simplified considering a steady state of the process. O

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.336-341
• /
• 2013

In this paper, the design concept of a low-temperature vacuum blackbody was described, and thermophysical model of the blackbody was numerically evaluated. Also the working performance of low-temperature vacuum blackbody was evaluated using infrared camera system. The blackbody system was constructed to operate under high-vacuum conditions ($2.67{\times}10^{-2}$ Pa) to reduce temperature uncertainty, which is caused by vapor condensation at low temperatures usually below 273 K. In addition, both heat sink and heat shield including cold shield were installed around radiator to prevent heat loss from the blackbody. Simplified mathematical model of blackbody radiator was analyzed using modified Stefan-Boltzmann's rule. The infrared radiant performance of the blackbody was evaluated using infrared camera. Based on the results of measurements, and simulation, temperature stability of the low-temperature vacuum blackbody demonstrated that the blackbody system can serve as a highly stable reference source for the calibration of an infrared optical system.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.10
• /
• pp.5-16
• /
• 2012

Geotechnical buried structures with relatively light weight have been suffering from uplift damage due to liquefaction in the past earthquakes. The factor of safety approach by Koseki et al. (1997a), which is widely used in seismic design, predicts the triggering of uplift. However, a method for "quantitative" estimates of the uplift displacement has yet to be established. Estimation of the uplift displacement may be an important factor to be considered for designing underground structures under the framework of performance-based design (ISO23469, 2005). Therefore, evaluation of the uplift displacement of buried structure in liquefied ground during earthquakes is needed for a performance-based design as a practical application. In order to predict the uplift displacement quantitatively, a simplified method is derived based on the equilibrium of vertical forces acting on buried structures in backfill during earthquakes (Tobita et al., 2012). The method is verified through comparisons with results of centrifuge model tests and damaged sewerage systems after the 2004 Niigata-ken Chuetsu, Japan, earthquake. The proposed flow diagram for performance-based design includes estimation of the uplift displacement as well as liquefaction limit of backfill.

• Journal of Korea Multimedia Society
• /
• v.8 no.9
• /
• pp.1258-1268
• /
• 2005

While the concept of Home Network is laying by and its interests are increasing by means of digitalizing of the information communication infrastructure, many efforts are in progress toward convenient lives. Moreover, as information household appliances which have a junction of connecting to the network are appearing over the past a few years, the demands against intellectual Home Services are increasing. In this paper, by being based upon Multimedia which is an essential factor for developing of various application services on ubiquitous computing environments, we suggest a simplified application model that could apply the information to the automated processing system after studying user's behavior patterns using authentication and access control for identity certification of users. In addition, we compared captured video images in the fixed range by pixel unit through some time and checked disorder of them. And that made safe of user certification as adopting self-developed certification method which was used 'Hash' algorism through salt function of 12 byte. In order to show the usefulness of this proposed model, we did some testing by emulator for control of information after construction for Intellectual Multimedia Server, which ubiquitous network is available on as a scheme so as to check out developed applications. According to experimental results, it is very reasonable to believe that we could extend various multimedia applications in our daily lives.

• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.501-515
• /
• 2008

Recently, as users' requests for high quality mobile multimedia services are rapidly increasing and additional bandwidth can be provided by adopting the hierarchical modulation transmission technology, the research on the Advanced Terrestrial DMB (AT-DMB) service using the SVC (Scalable Video Coding) scheme is being actively studied. But, in order to realize a compatible video service and to accelerate the successful standardization and commercialization, it is necessary to simplify the compatible encoder structure. In this parer, we propose a fast mode decision method by constraining the redundant coding modes in the spatial scalable encoder that keeps the current T-DMB video in base layer. The proposed method is based on the statistical characteristics of each coding mode at both base and enhancement layers, inter-layer predictions, which are derived by investigating macroblock-layer coding modes of the spatial scalable encoder's functional structure. Through computer simulations, it is shown that a simplified encoder model that reduces the heavy computational burden can be found, while keeping the objective visual quality very high.

• Journal of Korean Society of Transportation
• /
• v.34 no.2
• /
• pp.180-190
• /
• 2016

Atmospheric pollutants such as Nitrogen Oxides(NOx), Carbon Monoxide(CO), Carbon Dioxide($CO_2$), Particulate Matter(PM) and Hydrocarbons(HC) come from vehicle exhaust gases. Emission curves based on average travel speeds have been employed for estimating on-road emissions as well as evaluating environmental impacts of transportation plans and policies in Korea. Recently, there is a growing interest in estimation methods of vehicle emissions considering relationship between vehicle dynamic driving characteristics and emissions, and incorporating such emission estimators into traffic simulation models. MOVES Lite, a simplified version of MOVES, is one of the estimation methods. In this study, the authors performed a study to develop an adaptable version of MOVES Lite for Korea, called MOVES Lite-K. Vehicle types, driving characteristics, emission rates, and emission standards of Korea were reflected in MOVES Lite-K. The characteristics of emission calculation of MOVES Lite-K and NIER emission curves were compared and the adaptability of MOVES Lite-K were examined.