• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2519-2528
• /
• 2013

The standard of estimate is being used as basic material for appropriating construction expenses of public institutions and private institutions. The present thesis aims to propose a new form of a standard of estimate and a calculation method of work amount of equipment by targeting a representative construction type selected at river reservation work. The present thesis expects that the convenience of users can be expanded by improving applicability of a standard of estimate and simplifying a calculation process of work amount of equipment in a process planning stage so that the provision of work crew lineup information and daily productivity information is possible by a standard of estimate. In case of river conservation work, because the variables called work conditions act very largely, there exists much difficulty for generalizing productivity information and work amount of equipment, but if its accuracy could be enhanced by improving continuous productivity information and work amount information of equipment, the simplification of process planning establishment and cumulative process through a standard of estimate would be possible.

• Korean journal of food and cookery science
• /
• v.30 no.5
• /
• pp.579-587
• /
• 2014

Korean food is being recognized for its excellence. This paper attempts to provide material for the popularization of Korean cuisine with respect to foreign nationals living in Korea who are vegetarian by studying their Korean cuisine knowledge and preferences. The results of an Importance-Performance Analysis showed that though the importance values of traditional spice use such as garlic and the consideration of ingredient price were high, their performance values were low. Thus, these were areas identified as needing major improvement. Repeated measured data analysis was performed to determine variations in the perception of major factors for the development of Korean cuisine. The results indicated that simplification of seasoning was the most important factor followed by diversification of food ingredients, resale of vegetables in small quantities, ease of obtaining Korean cuisine recipes, and popularization of herbal and temple food, in that order. The least important factor in developing Korean cuisine was determined to be the reduction in levels of salt. Conjoint analysis was performed on the choices affection the selection of Korean cuisine, and price was found to be the most important factor. It was also determined that the effectiveness in the combination of fusion style, health oriented, concurrently served, medium to low price Korean cuisine was highest in preference. The next highest preferred combination was traditional style, health oriented, concurrently served, medium to low price Korean cuisine. The most significant factor to keep in mind in developing Korean dishes for foreign vegetarians was determined to be price. Furthermore, it was important to not simply reduce caloric intake but to use healthy ingredients and cooking methods.

• Smart Structures and Systems
• /
• v.24 no.5
• /
• pp.631-639
• /
• 2019

Finite element analysis is one of the important methods to study the structural performance. Due to the simplification, discretization and error of structural parameters, numerical model errors always exist. Besides, structural characteristics may also change because of material aging, structural damage, etc., making the initial finite element model cannot simulate the operational response of the structure accurately. Based on Bayesian methods, the initial model can be updated to obtain a more accurate numerical model. This paper presents the work on the field test, modal identification and model updating of a Chinese reinforced concrete pagoda. Based on the ambient vibration test, the acceleration response of the structure under operational environment was collected. The first six translational modes of the structure were identified by the enhanced frequency domain decomposition method. The initial finite element model of the pagoda was established, and the elastic modulus of columns, beams and slabs were selected as model parameters to be updated. Assuming the error between the measured mode and the calculated one follows a Gaussian distribution, the posterior probability density function (PDF) of the parameter to be updated is obtained and the uncertainty is quantitatively evaluated based on the Bayesian statistical theory and the Metropolis-Hastings algorithm, and then the optimal values of model parameters can be obtained. The results show that the difference between the calculated frequency of the finite element model and the measured one is reduced, and the modal correlation of the mode shape is improved. The updated numerical model can be used to evaluate the safety of the structure as a benchmark model for structural health monitoring (SHM).

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.2
• /
• pp.152-160
• /
• 2012

The development of building must be accompanied with construction technology and performance of materials. In particular, wet processes have a high level of dependence on manpower and a low level of diversification of materials used. This study aimed to determine the applicability of various materials for wet process, mechanized construction and eco-friendly building materials through a comparison with dry premixed mortar. As a result, it was found that resin plaster and gypsum plaster's strength is lower than that of dry cement mortar, but their mechanization application, construction simplification, smoothness and bond strength are higher than that of dry cement mortar. And estimate that is valid as workability, bonding strength, eco-friendly building material in occasion of gypsum plaster.

• Design Convergence Study
• /
• v.16 no.6
• /
• pp.59-74
• /
• 2017

Louis Sullivan insisted, "Form follows function." Functionality is one of the most fundamental elements for users to use product or space, and "function" in space and architecture has the meaning of the most important factor in determining its form. In this way, from the viewpoint of "Functionalism," the research selected Toyo Ito to see how important elements pursued by Functionalism are related to his forms of creation. Small residential space projects of Toyo Ito from the early 1970s to the present are selected, so that the structure, material and space type of space and architecture can easily grasped and analyzed. Space and architectural structures and surfaces were classified into the characteristics of materials and classified according to the strength of openness of space. As a result, the space and architecture that pursue the function use a method that can maximize the efficiency of the function while excluding the whole decoration in order to highlight the function. The characteristics found in Toyo Ito's small-scale residential space can be defined as the formalization and simplification of the form, the openness of space, and the versatility of each element.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.4
• /
• pp.549-556
• /
• 2002

The natural frequency of a system is commonly used in evaluating the serviceability condition of a floor. However. the current equations recommended in many building codes do not consider the various material types of a slab system; thus. different results are observed. Likewise. the transformation of a slab section required to predict the natural frequency of a composite deck plate is complicated. due to the varying shapes of the deck plates. Therefore. a new and simplified method of transforming a composite slab into an equivalent concrete slab is proposed. he modified vibration prediction equation was proposed based on the current vibration prediction equation recommended by LRFD. Compared to other equations. it is the closest to those obtained from experiments. The modified equation provides about 14.3% more accurate results than that recommended by LRFD. Likewise. the applicability of the proposed equation to other types of composite deck plate floor system was validated.

• Journal of Information Technology Services
• /
• v.15 no.4
• /
• pp.73-83
• /
• 2016

Pedestrian safety was recently highlighted with a yellow carpet, a yellow-colored pavement material prepared for children waiting for signals for pedestrian crossing, without validation of its efficiency in practice. It was a promising device likely to assist highway safety by stimulating pedestrian to step on the yellow-colored area; it was generally called nudge effects. This paper delivers a study conducted to check the effectiveness of yellow carpet in three different aspects in vehicle driver's perspective by applying the newly introduced information technology (IT) service: Visual Attention Software (VAS). It was assumed that VAS developed by 3M in the United States should be able explain the Korean drivers' visual reaction behaviors since technology embedded in VAS was developed based on and proved by other various international countries and continents in the world. A set of pictures was taken at thirteen different field sites in seven school zone areas in the Seoul metropolitan area before and after the installation of a yellow carpet, respectively. Sets of those pictures were analyzed with VAS, and the results were compared based on the selective safety measures: the likely focusing on standing pedestrians (waiting for a pedestrian's green signal time) affected by its background (yellow-colored pavement) contrasting him or her. The test results from a set of before-and-after comparison analyses showed that the placement of yellow carpet would (1) increase 71% of driver's visual attention on pedestrian crossing areas and (2) change the sequential order of visual attention on that area 2.4 steps ahead. The findings would enhance deployment of such promising efficiency and thus increase children safety in pedestrian crossing. The result was promising to highlight the way to support the changes in conservative traffic safety engineering field by applying the advanced IT services, while much robust research was recommended to overcome the limitation of simplification of this study.

• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.55-62
• /
• 2010

This study examines attributes and expression characteristics of 'Mix & Match' which is one of the major current trends in interior designs. The concept and background of 'Mix & Match' was ascertained through research of previous documents and studies, and its attributes were explored. In order to examine the expression characteristics to see how they are expressed in actual interior designs, case analyses were carried out centering on the expression elements such as material, light & lighting, color, furniture and objects which were regarded as important in previous studies and related articles so far. The case analyses were carried out for works where the concept of 'Mix & Match' was prominent in designs produced in 2007 and 2008, chosen from the main reports of the representative interior design journals, 'Interiors' and 'INTERNI & Decor'. As a result, it has been found that 'Mix & Match' is not limited to one attribute but the temporal, spatial and genre attributes are present all at the same time, or various expression elements exist in one attribute. This is a distinct character commonly shown in most of the cases and each expression element is expressed in variety according to spatial concept, from a simple parallel to substitution, transfer and modification (simplification, transformation of the scale, rate modification etc.) Therefore, in creating the space for 'Mix & Match' or in interpretation of it, the understanding of these expression characteristics would make it possible for clearer and more various applications of design, and furthermore will be meaningful for supply and accumulation of reference in design communication.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.113-122
• /
• 2023

This study was conducted on the premise of the development of cultural products using relic assets of traditional culture in a knowledge and information society led by culture and soft power. It was conducted in the context of exploring the possibility of cultural content products of Wa-Dang relics excavated from traditional architecture in the Unified Silla Period and expanding the scalability of commercialization motifs that are highly useful in jewelry design. First, the original form, material, use, size, meaning, and formative aesthetics of Wa-Dang were identified through literature and media research. Among the considered Wa-Dang, 10 types of Wa-Dang which represent the category and have values in modules and patterns were selected, and, then, circular images were extracted and modularized with a "formal simplification technique." Based on the "mathematical symmetry analysis technique," which is a method of systematizing pattern composition arrangement format. we derived a planar formative element that can be used in the development of the cultural content industry and jewelry design. In order to expand its usability in the jewelry industry in the future, it was presented as a 2D digital image. In the future, we hope more studies on the various cultural content industry utilizing the traditional culture will be carried out.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.1
• /
• pp.81-86
• /
• 1990

This study aims to systemize the developement of the domestic girder bridges, and to contribute to the future construction of our own bridges. Bridges are analyzed by grouping them in terms of construction time and structural component. The bridges, which were constructed during the first era of Goryeo-dynasty, have no distinction between main beams and stone deck. Form the latter era of Goryeo-dynasty, the structure of the bridges began to seperate into main beams and stone deck in order to enlarge the width and span length. The bridges, which were constructed during the Chosun-dynasty, were constructed using modulized material, and are considered to be built by structural design concept. Their construction materials became larger due to the development of transportation method. The superstructure of the old Korean bridges became more complicated in contrast to simplification of the substructures.