• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1905-1915
• /
• 2019

This paper investigated the influence of simple support girds on flow, irrespective of having mixing vanes, in a 1 × 3 array rod bundle by using CFD methodology and the most accurate turbulence model which could reflect the actual physics of the flow was determined. In this context, a CFD model was created simulating the experimental studies on a single-phase flow [1] and the results were compared with the experimental data. In the first part of the study, influence of mesh was examined. Tetra, hybrid and poly type meshes were analyzed and convergence study was carried out on each in order to determine the most appropriate type and density. k - ε Standard and RSM LPS turbulence models were used in this section. In the second part of the study, the most appropriate turbulence model that could reflect the physics of the actual flow was investigated. RANS based turbulence models were examined using the mesh that was determined in the first part. Velocity and turbulence intensity results obtained on the upstream and downstream of the spacer grid at -3d_h, +3d_h and +40d_h locations were compared with the experimental data. In the last section of the study, the behavior of flow through the spacer grid was examined and its prominent aspects were highlighted on the most appropriate turbulence model determined in the second part. Results of the study revealed the importance of mesh type. Hybrid mesh having the largest number of structured elements performed remarkably better than the other two on results. While comparisons of numerical and experimental results showed an overall agreement within all turbulence models, RSM LPS presented better results than the others. Lastly, physical appearance of the flow through spacer grids revealed that springs has more influence on flow than dimples and induces transient flow behaviors. As a result, flow through a simple support grid was examined and the most appropriate turbulence model reflecting the actual physics of the flow was determined.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1264-1266
• /
• 2009

We introduce a location-based routing model applied for grid backbone nodes in wireless mesh network. The number of paths with nearest distance between two nodes is calculated and used as key parameter to execute routing algorithm. Node will increase the transmission range that makes a trade off with data rate to reach its neighbors when node itself is isolated. The routing model is lightweight and oriented thanks to the simple but efficient routing algorithm.

• Architectural research
• /
• v.1 no.1
• /
• pp.23-30
• /
• 1999

This research investigates a system for house design automation. The system is based on an object-oriented building data model, aiming to support the house design process conducted by non-expert users. Its object model, with simple yet powerful user interfaces, enables a CAD system to handle a complicated building system with much ease. Hence, the model dramatically simplifies the design process beyond just the automatic document generation. In this paper, we discuss the aspects of the building data model, introduce critical concepts such as grid objects and structured floor plan, and present a prototype system called GPLAN. The system is implemented in the framework of our building data model, and it provides a host of intelligent features that have been proved useful for house design automation.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.3_4
• /
• pp.152-159
• /
• 2004

The Grid system is an emerging computing infrastructure that will substitute for existing distributed systems. However end users have a difficulty in using the Grid because of its complicated usage, which is an inherent characteristic from the heterogeneous mechanism of the Grid. In this paper, we present the JCML(Job Control Markup Language) and its GUI-based editor, which not only provide users with ease of use, improved working environment, but assist users to execute their jobs efficiently The JCML is a job control language that improves the RSL of Globus, which defines global services in Grid. The JCML is designed to support flexibility among various Grid services using standard XML. And it makes use of a graph representation method, GXL(Graph eXchange Language), to specify detailed job properties and dependencies among jobs using nodes and edges. The JCML editor provides users with GUI-based interface. With the JCML editor, a complicated job order can be easily completed using very simple manipulations with a mouse, such as a drag-and-drop.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1257-1261
• /
• 2017

This paper focuses on understanding the interrupting capability of an arc contact system in a molded case circuit breaker (hereafter MCCB). We selected four types of MCCBs and analyzed the magnetic flux density distributions in the contact systems caused by the fault currents. We ascertained that the magnetic flux density profile varies according to the shape of the contact system and was asymmetric at both the ends of an arc, perpendicular to the arc column because of the magnetic grid installed in the contact system. The asymmetric difference creates a magnetic force that pushes the arc current outwards and provides an interrupting capability. We have introduced a simple analysis method for determining the interrupting capability of the contact system for an MCCB by the arc-driving magnetic flux density.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1914-1928
• /
• 2022

To improve the heat transfer efficiency of the reactor fuel assembly, it is necessary to accurately calculate the two-phase flow boiling characteristics and the critical heat flux (CHF) in the fuel assembly. In this paper, a Eulerian two-fluid model combined with the extended wall boiling model was used to numerically simulate the 5 × 5 fuel rod bundle with spacer grids (four sets of mixing vane grids and four sets of simple support grids without mixing vanes). We calculated and analyzed 11 experimental conditions under different pressure, inlet temperature, and mass flux. After comparing the CHF and the location of departure from the nucleate boiling obtained by the numerical simulation with the experimental results, we confirmed the reliability of computational fluid dynamic analysis for the prediction of the CHF of the rod bundle and the boiling characteristics of the two-phase flow. Subsequently, we analyzed the influence of the spacer grid and mixing vanes on the void fraction, liquid temperature, and secondary flow distribution. The research in this article provides theoretical support for the design of fuel assemblies.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.775-785
• /
• 2013

Because of their exclusive features, millimeter wave directive mesh networks can be considered for small cell backhaul support in urban environments. For this purpose, a network of closely spaced stations has been considered with very directive line-of-sight links operating in the 60-GHz band. An attempt is made to evaluate channel response and interference behavior in such a network, taking into account the effect of building blockage. A simple grid of building blocks is considered as the propagation environment, and wave propagation is simulated using 2.5-dimensional (2.5D) ray tracing (2D with ground effect) to calculate the received signal at different nodes in the network. The results are compared with free space predictions and used to evaluate interference at all nodes in the channel and describe certain characteristics of links, such as the delay profile and the correlation length.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.22-30
• /
• 2023

The portable mobile devices with high performance and high speed 5G network activate and explode the demands for ubiquitous information services that remove the limitations of time for the communication and places to request for the information. NN (Nearest Neighbor) search is one of the most important types of queries to be processed efficiently in the information services. Various indexes have been proposed to support efficient NN search in the wireless broadcast system. The indexes adopting Hilbert curve, grid partition or Voronoi diagram enable the clients to search for NN quickly in the wireless broadcast channel. It is necessary that an efficient means to evaluate the performances of various indexes. In this paper, we propose an open framework that can adopt a variety of indexing schemes and evaluate and compare the performances of them. The proposed framework is organized with open and flexible structure that can adopt hybrid indexing schemes extensible to Voronoi diagram as well as simple indexing schemes. With the implemented framework, we demonstrate the efficiency and scalability and flexibility of the proposed framework by evaluating various indexing schemes for NN query.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.488-498
• /
• 2016

Much of the information is stored as data, research has been activated for analyzing the data and predicting the special circumstances. In the case of power data, the studies, such as research of renewable energy utilization, power prediction depending on site characteristics, smart grid, and micro-grid, is actively in progress. In this paper, we propose a power prediction model using the substation environment data. In this case, we try to verify the power prediction result to reflect the multiple arguments on the power and weather data, rather than a simple power data. The validation process is the effect of multiple factors compared to other two methods, one of power prediction result considering power data and the other result using power pattern data that have been made in the similar weather data. Our system shows that it can achieve max prediction error of less than 15%.

• Nuclear Engineering and Technology
• /
• v.33 no.6
• /
• pp.619-625
• /
• 2001

An axial-flow-induced vibration model was proposed for a rod supported by two translational springs at both ends. For developing the model, a one-mode approximation was made based on the assumption that the first mode was dominant in vibration behavior of the single span rod. The first natural frequency and mode shape functions for the flow-induced vibration, called the FIV model were derived by using Lagrange＇s method. The vibration displacements at reactor conditions were calculated by the proposed model for the spring-supported rod and by the previous model for the simple-supported(55) rod. As a result, the vibration displacement for the spring-supported rod was larger than that of the 55 rod, and the discrepancy between both displacements became much larger as flow velocity increased. The vibration displacement for the spring-supported rod appeared to decrease with the increase of the spring constant. AS flow velocity increased, the increase rate of vibration displacement was calculated to go linearly up, and that of the rod having the short span length was larger than that of the rod having the long span length although the displacement value itself of the long span rod was larger than that of the short one.