• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.11a
• /
• pp.27-31
• /
• 2003

To maintain serviceability of concrete structure more than proper it is necessary not only predict service life through periodical monitor but also need monitoring system to recognize optimal time and method for repair. Recently, CPGFRP, replacing some GFRP with CF, is developed and used for monitoring concrete fraction. But dramatic resistance change of CPGFRP is showed below 0.5% strain and it is not small strain in terms of monitoring micro crack in concrete. In other word, monitoring with CF is not suitable in low stress hut hight stress. In this study, we accessed applicable possibility and reliability of CPGFRP composite as monitoring sense that is proved very sensitive to stress through domestic and oversea previous study. CPGFRP composite plays a role in specimen like steel and increases flexural strength. CPGFRP composite shows resistance increasement in micro crack. In particular, CPUFRP is more sensitive than strangage in low stress. Resistance change ratio curve is very similar to strain curve so sensitivity and reliability is very excellent to monitor concrete fracture.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.38-43
• /
• 2008

As the sensibility engineering has become a mainstream information tool, searching answers has become crucial as well. Because the collaborative filtering refers to partial users information who have the similar preference, it tends to ignore the rest. In this paper, we propose the human sensibility ergonomic apparel coordination supporting method using the genetic algorithm. This proposed method calculates evaluation values using fitness function based the genetic algorithm, and gathers through a-cut. To estimate the performance, the suggested method is compared with the existing methods in the questionnaire dataset. The results have shown that the proposed method significantly outperforms the accuracy than the previous methods.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.325-333
• /
• 1997

In addition to their function, there is growing interest in esthetics of restorations for teeth from fracture and loss. Because the perception of color depends on a lot of factors such as light source, object, observer and so on. It is difficult to make an objective expression. Therefore the using of mechanical equipment is recommended to exclude these variables and observer's vias. This study was carried out to evaluate the teeth color with a newly developed digital camera and to suggest a way to solve its flaws. After photo-taking and storaging the images of normal teeth into a computer, color spaces were examined with an image analysis system, Adobe Photoshop 3.04 and a statistical significance was determined between groups in term of teeth positions and ages. Results were as follow ; 1. Central incisor looked darker than lateral incisor(p<0.05), but lateral incisor and canine showed a similar lightness. 2. Central incisor showed more greenish color than lateral incisor and canine(p<0.05). 3. Canine showed higher yellowish value than central and lateral incisors(p<0.05). 4. Central incisor and canine showed no difference with aging. But in lateral incisor, teeth in fifth decade were lighter than those of third(p<0.05) and teeth in third decade were more reddish and yellowish than those of fourth decade(p<0.05).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2003.05a
• /
• pp.27-31
• /
• 2003

To maintain serviceability of concrete structure more than proper it is necessary not only predict service life through periodical monitor but also need monitoring system to recognize optimal time and method for repair. Recently, CPGFRP, replacing some GFRP with CF, is developed and used for monitoring concrete fraction. But dramatic resistance change of CPGFRP is showed below 0.5％ strain and it is not small strain in terms of monitoring micro crack in concrete. In other word, monitoring with CF is not suitable in low stress but hight stress. In this study, we accessed applicable possibility and reliability of CPGFRP composite as monitoring sense that is proved very sensitive to stress through domestic and oversea previous study. CPGFRP composite plays a role in specimen like steel and increases flexural strength. CPGFRP composite shows resistance increasement in micro crack. In particular, CPGFRP is more sensitive than strangage in low stress. Resistance change ratio curve is very similar to strain curve so sensitivity and reliability is very excellent to monitor concrete fracture.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.1
• /
• pp.1-11
• /
• 2000

Dental temporary resin should have adequate strength and similar esthetics as natural teeth. Recently esthetics has become a high priority in clinical dentistry. Thus the evaluation of color stability of dental temporary resin has become an important part in dental research. The purpose of this study was to evaluate the difference in color stability of 3 resins($Snap^{(R)}$, Temporary bridge $resin^{(R)}$, Trim $II^{(R)}$) according to polymerizing methods and stainning. The resins were divided into groups by 2 types of polymerizing methods ( air or pressure and heat curing) The resins were dyed with coffee, chlorhexidine and artificial saliva and then the color stability was evaluated with a spectrophotometer(CM-503i, Minolta, Japan). The results were as follows ; 1. In the color stability according to polymerizing method, pressure and heat polymerizing method was higher than air polymerizing method. 2. The color stability according to staining fluid decreased in the order of I, II, III group, there was significant difference among the groups of staining fluid. 3. The color stability according to resins decreased in the order of $Snap^{(R)}$, Trim $II^{(R)}$, Temporary Bridge $resin^{(R)}$, The $Snap^{(R)}$ resin was highest color stability, there was significant difference among the 3 resins.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.172-176
• /
• 2006

Fe(III)-Coated Star Fish (ICSF) was prepared by reaction of calcined Star Fish (SF) with Fe(III) solution at an elevated temperature. To investigate the stability of ICSF at acidic condition, dissolution of Fe was studied at pH 2 as a function of time. Extracted iron was negligible over the entire reaction time. This stability test suggests the applicability of ICSF in the treatment of wastewater even at low pH. Adsorption capacity of Cu(II) onto SF and ICSF was investigated in a batch and a column test. In the pH-edge adsorption, adsorption of copper onto SF and ICSF was quite similar over the entire pH range due to the presence of an important amount of Fe in SF itself. From the adsorption isotherm obtained with variation of the concentration of Cu(II), ICSF showed 1.6 times greater adsorption capacity than SF. Also, ICSF showed a greater removal capacity of Cu(II) in the column test.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.1
• /
• pp.25-29
• /
• 2012

The novel type of cable under consideration is cooled by gaseous Helium at elevated pressure. Helium is known for having poor electric breakdown strength; therefore the dielectric capabilities of this type of cable must be tested under conditions similar to the envisaged operation. In order to study the dielectric performance we have designed and built a novel high pressure cryostat rated at 2.17 MPa which has been used for testing model cables of lengths of up to 1 m. The cryostat is an open system where the gas is not re-circulated. This allows maintaining a high purity of the gas. The target temperature range is between 40 K and 70 K. This substantially increases the critical current density of the HTS compared to 77 K, which is the typical temperature of cables cooled by liquid nitrogen. The cryostat presented allows for adjusting the temperature and keeping it constant for the time necessary to run a complete dielectric characterization test. We give a detailed description of the cryostat. Measurements of partial discharge inception voltages as well as the temperature distribution along the model cables as a function of time are presented.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.379-384
• /
• 2011

The scope of the problems that could be solved by monitoring and the improvement of the recognition time is directly correlated to the performance of the management function of the business process. However, the current monitoring process of business activities decides whether to apply warnings or not by assuming a fixed environment and showing expressions based on the design rules. Also, warnings are applied by carrying out the measuring process when the event attribute values are inserted at every point. Therefore, there is a limit for distinguishing the range of occurrence and the level of severity in regard to the new external problems occurring in a complicated environment. Such problems cannot be ed. Also, since it is difficult to expand the range of problems which can be possibly evaluated, it is impossible to evaluate any unexpected situation which could occur in the execution period. In this paper, a process-evaluating model based on the goal scenario is suggested to provide constant services through the current monitoring process in regard to the service demands of the new scenario which occurs outside. The new demands based on the outside situation are analyzed according to the goal scenario for the process activities. Also, by using the meta-heuristic algorithm, a similar process model is found and identified by combining similarity and interrelationship. The process can be stopped in advance or adjusted to the wanted direction.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.510-514
• /
• 1993

The retention behavior of proteins was investigated by using reversed-phase chromatography (RPC), comparing to the retention behavior of small molecules in RPC. The evaluation was carried out on a SynChropak RP-P($C_{18}$) column with 0.1% aq. TFA-organic solvent modifier such as acetonitrile, isopropanol, and ethanol. The Z value (the number of solvent molecules required to displace the solute from the surface) was a general index for the characterization of protein retention as a function of organic concentration over a range of temperature between 5 and 70$^{\circ}C$. Van't Hoff plots provided the basis for evaluating the enthalpic and entropic changes associated with the interaction between protein and the stationary phase. Z values did not change significantly at the range of temperature showing the consistent ${\Delta}H^{\circ}$ and ${\Delta}S^{\circ}$ values. From these investigation, it was concluded that the retention behavior of proteins in RPC was able to be predicted by the retention parameters applied to small molecules. Furthermore, myoglobin and hemoglobin in RPC as stated above showed a similar retention behavior regardless of their molecular weights.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.3
• /
• pp.65-80
• /
• 2021

PURPOSE: This study was conducted as a literature review to analyze the research trends related to the International Classification of Functioning, Disability and Health (ICF) in Korea from 2015 to 2020. METHODS: Precedent studies were searched with the search term "ICF" or "international classification of functioning, disability and health" from the databases of RISS, KISS, DBpia, and Pubmed. The inclusion criteria are that the studies have been carried out in Korea from 2015 to 2020 using ICF by researchers consisting of one or more Koreans and have been peer-reviewed. RESULTS: Of the total 269 studies, 107 that met the inclusion criteria were analyzed. It was found that these studies were published at a similar frequency each year. The most common area of expertise was identified as the clinical area (n = 67), followed by special education (n = 21) and social welfare (n = 13). The study subject groups were mostly patients (n = 39), disabled people (n = 25), and related experts (n = 13). The most common research topic was functioning evaluation (n = 49) and followed by a literature review (n = 29), and the most frequently used components in all the areas of expertise were activity and participation (n = 98), body function and structure (n = 73), and environmental factors (n = 61). CONCLUSION: For the past six years, domestic ICF-related research has been conducted in a wider range of expertise areas on more subdivised subject groups. Continuous research, development of standardized curricula and contents, and development of coding tools are considered to be important in vitalizing the use of the ICF.