• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.363-365
• /
• 2006

소비자의 요구와 기술력의 발달로 PDP시장은 42인치와 60인치등 대형PDP가 주류를 이루고 있으며 대형화에 따라서 PDP전원의 소모전력 또한 $400W{\sim}600W$ 까지 증가 하고 있다. 기존 소용량 PDP전원으로 사용되던 Flyback의 경우 소모 전력이 증가함에 따라 대형PDP에 적용하기에는 소자 내압 및 시스템 효율 측면에서 다소 무리가 있다. 따라서 대형PDP의 전원을 위해서 새로운 2 Switch 3 Diode를 채용한 고효율 DCR (Diode Clamping Rectifier) Flyback Converter를 제안하였으며 이를 42인치 PDP에 적용하여 회로의 타당성 및 우수성을 검증하였다.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.904-913
• /
• 2002

In this paper, the dynamic stress intensity factors of fracture mechanics are numerically computed in time domain using the FEM. For which the finite element formulations are derived applying the Galerkin method to the equations of motion in convolution integral as has been presented in the previous paper. To assure the strain fields of r$^{-1}$ 2/ singularity near the crack tip, the triangular quarter-point singular elements are imbedded in the finite element mesh discretized by the isoparametric quadratic quadrilateral elements. Two-dimensional problems of the elastodynamic fracture mechanics under the impact load are solved and compared with the existing numerical and analytical solutions, being shown that numerical results of good accuracy are obtained by the presented method.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.984-989
• /
• 2009

The present study has been conducted to predict the temperature distribution in the core of the scraper type ice generator. The analytic model was simplified as the flow in the annular type cylinder, which had an inside wall moving in axial direction due to the rotation of screw and a fixed outside wall. The governing equations were arranged by the method of separation of variables. The results corresponded to the exact solutions of the Bessel function. The qualitative results such as general characteristics of heat transfer in annulus flow from outer cylinder wall to the inside wall were obtained. However the amount of the heat transfer was underestimated as low as $1/5{\sim}1/6$ of the designed value.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권2호
• /
• pp.50-53
• /
• 2008

A design approach using a one-dimensional (1D) lumped model was studied and applied to an industrial inkjet printing head design for micro patterning on printed circuit boards. For an accurate analysis, a three-dimensional piezoelectric-driven actuator model was analyzed and its jetting characteristics were applied to 1Danalysis model. The performance of the 1D lumped model was verified by comparing measured and simulated results. The developed 1D model helped to optimize the design and configuration of the inkjet head and could be implemented in the design of multi-nozzle inkjet printing heads to improve the jetting frequency and minimize crosstalk.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권2호
• /
• pp.166-172
• /
• 2007

The flow around a rotating circular cylinder near a plane wall is investigated by the measurement of the lift acting on the cylinder and by the flow visualization using the hydrogen bubble technique in the circulating water tank. The experimental parameters are the rotating direction of the cylinder. the space ratios $H/D(H/D=0.05{\sim}0.5)$ between cylinder and plane wall and the velocity ratios ${\alpha}({\alpha}=0{\sim}{\pm}2.0)$. In the case of clockwise, the lift on the rotating circular cylinder was increased with the reduction of the space ratios and with the velocity ratios, the upper separation point was more shifted in the rotating direction with them. In the case of anticlockwise, the absolute value of the lift on the rotating circular cylinder was increased with increasing the space ratios and the velocity ratios. the lower separation point was more shifted in the rotating direction with them.

• Structural Engineering and Mechanics
• /
• 제2권3호
• /
• pp.257-267
• /
• 1994

Motions of an unsymmetric rigid body on a rigid floor subjected to earthquake excitations with special attention to coefficient of friction are investigated. Motions of a body in a plane are classified (Ishiyama 1980) into six types, i.e. (1) rest, (2) slide, (3) rotation, (4) slide rotation, (5) translation jump, (6) rotation jump. Based upon the theoretical and experimental research work special attention is paid to the sliding of a body. The equations of motions and the behavior of coefficient of friction in the time of floor excitation are studied. One of the features of this investigation is the introduction and estimation of the "time dependent" coefficient of friction. It has been established that the constant kinetic coefficient of friction $${\mu}(kin){\sim_\sim}0.8{\mu}(stat)$$ does not give the appropriate results. The method for the estimation of the friction coefficient variation during the time is given.

• 터널과지하공간
• /
• 제18권2호
• /
• pp.118-124
• /
• 2008

흙막이 구조물에 대한 발파진동 허용기준을 설정하고 10 m 이내 근거리 발파를 실측하여 흙막이 구조물에 전달되는 진동규모를 확인하였다. 또 시험발파 계측데이터로부터 발파작업이 흙막이 구조물과 배면지반에 미치는 영향을 평가하였다. 연구결과 $0.5{\sim}2.0kg$ 범위의 발파작업은 흙막이 구조물과 배면지반에 거의 영향을 미치지 않는 것으로 분석되었으나 발파압력에 의한 암반블록의 이동 영향을 고려하여 최소저항선의 2배 정도를 이격하여 발파할 것을 추천한다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.42-47
• /
• 2006

The flow around a rotating circular cylinder near a plane wall is investigated by the measurement of the lift acting on the cylinder and by the flow visualization using the hydrogen bubble technique in the circulating water tank. The experimental parameters are the rotating direction of the cylinder, the space ratios H/D$(H/D=0.05\sim0.5)$ between cylinder and plane wall and the velocity ratios $\alpha(\alpha=0\sim{\pm}2.0)$. In the case of clockwise, the lift on the rotating circular cylinder was increased with the reduction of the space ratios and with the velocity ratios, the upper separation point was more shifted in the rotating direction with them. In the case of anticlockwise, the absolute value of the lift on the rotating circular cylinder was increased with the space ratios and with the velocity ratios, the lower separation point was more shifted in the rotating direction with them.

• 센서학회지
• /
• 제6권2호
• /
• pp.81-86
• /
• 1997

DC 마그네트론 스퍼터링을 이용하여 측온저항체 온도센서용 백금박막을 $Al_{2}O_{3}$ 기판위에 증착시켰다. 열처리 온도, 시간이 증가할수록 박막의 비저항 및 면저항은 감소하였다. Lift-off 방법을 이용하여 $Al_{2}O_{3}$ 기판위에 백금 저항체를 만들었으며, 텅스텐 wire, 실버 에폭시 그리고 SOG를 이용하여 백금박막 측온저항체 온도센서를 제작하였다. $25{\sim}400^{\circ}C$의 온도범위에서 백금박막 측온저항체 온도센서의 저항온도계수와 저항 변화율을 조사한 결과, 열처리 온도, 시간 및 박막의 두께가 증가할수록 저항온도계수가 증가하였으며 측정 온도범위 내에서 저항값은 선형적인 변화를 보였다. 열처리 온도 $1000^{\circ}C$, 시간 240분 그리고 박막두께 $1{\mu}m$ 조건에서 백금의 벌크에 가까운 $3825ppm/^{\circ}C$의 저항온도계수값을 얻을 수 있었다.

• 한국자기학회지
• /
• 제18권1호
• /
• pp.43-47
• /
• 2008

[ $ZnO-Bi_2O_3-Al_2O_3-B_2O_3-SiO_2$ ] nano-glass를 sol-gel 법으로 제조 하였다. 평균 입자 크기는 60.3 nm였으며 매우 균일한 입도 분포를 가졌다. Nano-glass를 NiZnCu ferrite의 저온소성용 소결조제로 사용하였으며 NiZnCu ferrite에 nano-glass를 첨가한 후 $840{\sim}900^{\circ}C$에서 2시간 소결을 진행하였다. 소결성 및 자기적 특성에 대해 연구하였으며 밀도, 수축율, 초투자율, 품질계수, 및 포 화자화값을 측정하였다. nano-glass를 0.5 wt% 첨가하여 $900^{\circ}C$에서 소결한 토로이달 core 시편의 초투자율은 1 MHz에서 측정 시 193.3의 값을 가졌다. 초투자율과 포화자화값은 소결온도가 증가함에 따라 증가하는 경향을 나타내었다. sol-gel 법에 의해 제조된 $ZnO-Bi_2O_3-Al_2O_3-B_2O_3-SiO_2$ nano-glass를 칩인덕터용 NiZnCu ferrite의 저온 소결조제로 사용 가능함을 알 수 있었다.