• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.981-985
• /
• 2009

본 연구에서는 SWAT 모형을 이용하여 경지 불투수면 변화에 따른 유역 수문 영향을 분석하였다. 경안천유역의 경안 수위표 상류유역을 대상유역으로 선정하여 유역의 수문 자료를 수집하였으며, 대상유역의 위성영상 및 항공사진을 수집하고 원격탐사기법 및 지리정보시스템 이용하여 경지 불투수면을 고려한 토지피복도 및 수치지형자료 등을 구축하여 SWAT 모형의 적용성을 평가하였다. 1999년부터 2002년까지의 대상유역의 자료를 이용하여 유출량에 대하여 모형의 보정과 검정을 수행하였으며, 그 결과 모형이 적용성이 있는 것으로 평가되었다. 경지 불투수면 변화 시나리오를 작성하고 구축된 모형을 이용하여 시나리오에 따른 유역 수문 영향을 분석하였다. 총 유역 면적에 대한 시설재배지 면적 비율이 5.7%$^{\sim}$ 12.4%로 변화함에 따라 1.2%인 2002년 토지이용도를 이용한 모형의 모의결과에 비해 평균 유출량은 0.8%$^{\sim}$1.6% 증가하였으며, 지표 유출량과 측방 유출량을 포함한 직접유출량은 2.4%$^{\sim}$5.7% 증가하였으며, 이 중 지표 유출량은 5.7%$^{\sim}$14.2% 증가하는 것으로 나타났다. 지하수 유출량은 10.7%$^{\sim}$27.7% 감소하고 증발산량은 1.5%$^{\sim}$3.4% 감소하는 것으로 분석되었다.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.631-636
• /
• 1997

This study was conducted to increase the adorption capacity of microporous carbon which is widely used as an adsorbent. After increasing the adsorption capacity of microporous carbon by heat-treatment, chromium($Cr^{+6}$) solution, which is the one of hazardous heavy metals, was selectively adsorbed on microporous carbon. Optimum temperature range for the heat-treatment of microporous carbon was $340{\sim}350^{\circ}C$, and the average specific surface area was measured as $1380m^2/g$ by BET (Brunauer-Emmett-Teller) method. The weight loss was about 10 percents during the heating to optimum temperature. However, It became a qualitative adsorbent due to a larger specific surface area. Removal of chromium($Cr^{+6}$) in solution by heat-treated microporous carbon was successfully carried out.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2005.11a
• /
• pp.192-194
• /
• 2005

O$_3$/H$_2$O$_2$ 고급산화공정에서 1,4-D의 제거는 반응시간에 따라 완만하게 감소하였으나, O$_3$/catalyst 고급산화공정에서는 전체 제거량의 약 50${\sim}$75%가 반응 초기 5분 내에 제거되어 O$_3$/H$_2$O$_2$ 공정에 비해 초기 반응속도가 현저히 빠른 것을 알 수 있었다. O$_3$/H$_2$O$_2$ 고급산화공정은 ${\Delta}$TOC/${\Delta}$ThOC의 비는 0.09${\sim}$0.40으로 나타났으며, O$_3$/catalyst 고급산화공정에서는 ${\Delta}$TOC/${\Delta}$ThOC의 비가 0.68${\sim}$0.98로 나타나 O$_3$/catalyst 고급산화공정이 O$_3$/H$_2$O$_2$ 고급산화공정에 비해 유기물의 산화력이 우수한 것으로 확인되었다.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1102-1103
• /
• 2006

The pretreatment for substrate was carried out in change of gun pressure of $0.5\sim3.5$ bar using wet blasting. The size of $Al_2O_3$ powder was about $50{\sim}150{\mu}m$. As the results, the surface roughness of cemented carbide substrate was improved with increment of gun pressure of wet blasting. A new surface layer was formed and Co particles were uniformly distributed over the entire surface after pretreatment. The adhesion of the pretreated substrate in same PVD-TiAlN film was improved and in approximately $Ra=90\sim120\;nm$ shown the best adhesion value.

• Korean Journal of Food Science and Technology
• /
• v.19 no.3
• /
• pp.181-187
• /
• 1987

The lipids of ten major fishes caught in Korean seas were analyzed for fatty acid composition and for the content of $\omega-3$ polyunsaturated fatty acids. The major fatty acids present were hexadecanoic acid $(14{\sim}24%)$, hexadecenoic acid $(4{\sim}13%)$, octadecenoic acid $(8{\sim}29%)$, eicospentaenoic acid $(4{\sim}18%)$ and docosahexenoic acid $(6{\sim}33%)$. The ${\omega}-3$ polyunsturated fatty acids ranged from 18% to 48% of the total fatty acids depending on the species. The content of eicosapentaenoic acid was relatively high in sardine, gizzard shad and atka fish on the basic of fresh body weight, while that of docosahexaenoic acid was highest in hair tail and followed by atka fish and sardine.

• Macromolecular Research
• /
• v.17 no.2
• /
• pp.91-98
• /
• 2009

Conjugated PPV-derived block copolymers containing 2-ethylhexyloxynaphthalene unit were synthesized and characterized in this study. The resulting polymers were soluble in common organic solvents and showed good thermal stabilities, The weight-average molecular weights ($M_w$) of the copolymers ranged from 246,000 to 475,000 with PDIs of $1.3{\sim}2.1$. The optical properties of these polymers, measured both in a chloroform solution and on a film, showed a maximum absorption at $405{\sim}476\;nm$ for Copolymers $I{\sim}VIII$. In the PL spectra, Copolymers $I{\sim}VIII$ showed maximum peaks at $510{\sim}566\;nm$. The HOMOs, LUMOs and band gaps of the PPV derivatives of Copolymers $I{\sim}VIII$ were $5.30{\sim}5.77$, $3.04{\sim}3.24$, and $2.5{\sim}2.2\;eV$, respectively, The multi-layered, light-emitting diodes of ITO/PEDOT/copolymers/LiF/Al exhibited turn-on voltages of $6{\sim}2.5\;V$ Copolymer VIII exhibited the maximum brightness of $3.657\;cd/m^2$. Particularly, Copolymer VII, with an identical composition of MEH-PPV and naphthalene-PPV, showed a maximum luminance efficiency and power efficiency of 2,63 cd/A and 1.06 lm/W, respectively.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.3
• /
• pp.493-501
• /
• 2005

A power plant simulation tool ('PowerSim') has been developed with 10 years experience from the development of a plant simulator for efficient modeling of a power plant. PowerSim is the first developed tool in Korea for plant simulation with various plant component models, instructor station function and the Graphic Model Builder (GMB). PowerSim is composed of a graphic editor using general purpose design software, a netlist converter, component models, the scheduler, Instructor Station and an executive. The graphic editor generates a netlist that shows the connection status of the various plant components from the Simdiagram, which is drawn by Icon Drag method supported by GUI environment of the PowerSim. Netlist Converter normalizes the connection status of the components. Scheduler makes scheduling for the execution of the device models according to the netlist. Therefore, the user makes Simdiagram based on the plant Pipe and Instrument Drawing (P&ID) and inputs the plant data for automatic simulating execution. This paper introduces Graphic Model Builder (GMB), instructor station, executive and the detailed introduction of thermal-hydraulic modeling. This paper will also introduce basic ideas on how the simulation Diagram, based on netlist generated from general purpose design software, is made and how the system is organized. The developed tool has been verified through the simulation of a real power plant.

• Journal of radiological science and technology
• /
• v.13 no.2
• /
• pp.31-36
• /
• 1990

We got the following results from the experiment and examination in order to measure the bone-marrow dose of the patients when we did chest or abdomen radiography in the hospitals located in Seoul City from Jan. 1989 until Feb. 1990. 1. In the exposure factors for chest radiography, tube voltage $60{\sim}69\;kVp$ took 48.3%, $80{\sim}89\;or\;90{\sim}99\;kVp$ took 13.8% respectively, $70{\sim}79\;kVp$ 10.3% and $100{\sim}129\;kVp$ 10.3%. In tube current and exposure times, $6{\sim}10\;mAs$ took 41.4%, $16{\sim}20\;mAs$ took 20.7% and $11{\sim}15\;mAs$ 13.8%, measure under 5mAs 10.4% orderly. 2. In chest radiography, the bone-marrow dose came to the minimum 3.48 mrad, to the maximum 35.67 mrad, to the mean 14.46 mrad, to the standard deviation 8.89 mrad. 3. Comparing bone-marrow doses of the patients when we used Bucky technique and non-Bucky technique, that of Bucky technique was very higher than that of non-Bucky technique. Because the result was that Bucky technique had the span of $6.09{\sim}35.67$ mrad, while non-Bucky technique had the span of $3.48{\sim}17.40$ mrad. 4. In the exposure factors for abdomen radiography, tube voltage of $70{\sim}79\;kVp$ was 63.0%, that of $80{\sim}89\;kVp$ was 22.2%, that of $60{\sim}69\;kVp$ was 11.1 %. Tube current and exposure times of $31{\sim}40\;kVp$ was 33.4%, that of $51{\sim}60\;mAs$ was 29.6% and that of $41{\sim}50\;mAs$ was 22.2%. 5. In abdomen radiography, the bone-marrow dose of the patients came to the minimum of 6.96 mrad, to the maximum of 60.90 mrad, to the mean of 35.73mrad, to the standard deviation of 12.65 mrad.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.353-354
• /
• 2007

See Full Text

• Broadcasting and Media Magazine
• /
• v.15 no.4
• /
• pp.95-107
• /
• 2010

최근 MPEG에서는 ITU-T와 함께 JCT-VC(Joint Collaboration Team on Video Coding)를 구성하여 H.264/AVC 보다 두 배 이상 높은 고효율의 비디오 압축 표준을 진행하고 있으며, 이 새로운 표준을 가칭으로 HEVC(High Efficiency Video Coding)라 부른다. HEVC는 기존의 비디오 압축 표준들과 같이 하이브리드 부호화 구조를 사용하고 있으며, 고해상도 및 고효율의 압축을 실현하기 위해서 많은 새로운 기술들이 소개되었다. UHD급 이상의 고해상도 영상을 위해 큰 블록 단위의 부호화 처리와 변환 부호화 기술이 제안되었다. 그리고 H.264/AVC의 화면 내 예측과 화면 간 예측에 대한 성능 향상을 위해 많은 기술들이 소개되었다. 본 기고에서는 다양한 HEVC 기술 중에 엔트로피 부호화 방법에 대해서 소개한다.