• Archives of Plastic Surgery
• /
• 제35권4호
• /
• pp.407-412
• /
• 2008

Purpose: Hydrofluoric acid(HF) is one of the most dangerous mineral acids with the dissociated fluoride ions. The initial corrosive burn is caused by free hydrogen ion, and the second and more severe burn is caused by penetration of fluoride ions into subcutaneous tissues. Silver is a cation producing dressing, an effective antimicrobial agent, but older silver-containing formulations are rapidly inactivated by wound environment, requiring frequent replenishment. But, $Acticoat^{(R)}$ is a relatively new form of silver dressing which helps avoid the problems of earlier agents. The aim of this study is to evaluate effects of $Acticoat^{(R)}$, silver-containing dressing on the treatment for HF injury wound. Methods: From september 2006 to september 2007, the study was carried out with 10 patients who had HF partial thickness burns. $Acticoat^{(R)}$ dressing and 10% calcium gluconate wet gauze dressings in 10 cases. As a principle, in the emergency treatment, partial or complete removal of the nail and early bullectomy along with copious washing with normal saline was done, depending on the degree of HF invasion of the wound. Wound was dressed with $Acticoat^{(R)}$ and 10% calcium gluconate solution. The effect of dressing was investgated by serial bacterial culture and wound exudates assessment. Results: We therefore reviewed 10 cases of HF-induced chemical burns and treatment principle. The 10 cases who came to the hospital nearly immediately after the injury healed completely without sequelae. Conclusion: As the industrial sector develops, the use of HF is increasing more and more, leading to increased incidences of HF-induced chemical burns. The education of patients regarding this subject should be empathized accordingly. In conclusion, $Acticoat^{(R)}$ dressing is a better choice for HF partial thickness burn injuries because of shorter healing time, less pain and more comfortable dressing.

• 한국의류학회지
• /
• 제47권3호
• /
• pp.577-592
• /
• 2023

In this study, nanofiber-based textile sensors were developed for motion detection and monitoring. Poly(vinylidene fluoride) (PVDF) nanofibers containing zinc oxide (ZnO) nanoparticles and silver nanowires (AgNW) were fabricated using electrospinning. PVDF was chosen as a piezoelectric polymer, zinc oxide as a piezoelectric ceramic, and AgNW as a metal to improve electric conductivity. The PVDF/ZnO/AgNW nanocomposite fibers were used to develop a textile sensor, which was then incorporated into an elbow band to develop a wearable smart band. Changes in the output voltage and peak-to-peak voltage (V_p-p) generated by the joint's flexion and extension were investigated using a dummy elbow. The β-phase crystallinity of pure PVDF nanofibers was 58% when analyzed using Fourier transform infrared spectroscopy; however, the β-phase crystallinity increased to 70% in PVDF nanofibers containing ZnO and to 78% in PVDF nanocomposite fibers containing both ZnO and AgNW. The textile sensor's output voltage values varied with joint-bending angle; upon increasing the joint angle from 45° to 90° to 150°, the V_p-p value increased from 0.321 V_p-p to 0.542 V_p-p to 0.660 V_p-p respectively. This suggests that the textile sensor can be used to detect and monitor body movements.

• 대한소아치과학회지
• /
• 제49권4호
• /
• pp.497-504
• /
• 2022

연구의 목적은 2종의 액상형 불소 제재의 Streptococcus mutans에 대한 항균 효과를 평가하는 것이다. 불화은(AgF, 1제)과 요오드화칼륨(KI, 2제)로 구성된 Riva star aqua^TM (SDI)와 Fluor protector^® (FP; Ivoclar Vivadent)를 실험군에 사용하였다. 실험군은 4개의 군으로 구분하였다: AgF, KI, AgF + KI, FP. 양성 대조군(PC)에는 ampicillin을 사용하였고, 음성 대조군(NC)에는 아무런 처치도 시행하지 않았다. 각 군을 사용한 용액의 양에 따라 30과 50 µL로 다시 분류하였고, 평판 도말된 S. mutans에 적용하였다. 이후 억제대의 직경을 측정하였다. PC와 AgF는 모든 재료에 비해 큰 직경을 보였고(p < 0.05), AgF는 50 µL군에서 PC와 유의한 차이가 없었다(p > 0.05). FP는 30 µL군에서 AgF + KI 보다 큰 직경을 보였다(p = 0.009). KI는 NC와 유의한 차이가 없었다(p > 0.05). 불화은은 S. mutans에 대해 ampicillin과 유사한 항균효과를 보였으며, FP보다 더 뛰어남을 확인 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.97.6-97
• /
• 2002

In this paper, we present an arrayed flexible tactile sensor, which can detect contact normal forces as well as positions. The tactile sensor is developed using Polyvinylidene Fluoride (PVDF) that is known as piezoelectric polymer, and the surface electrode is fabricated using silk-screening technique with silver. We develop a charge amplifier in order to amplify the small signal from the sensor, and a fast signal processing unit by using a DSP chip. The developed tactile sensor is physically flexible and it can be deformed three-dimensionally to any shape so that it can be placed on anywhere on the curved surface. In the future, the developed sensor is applied to a dexterous robotic hand...$\textbullet$ Tactile sensing, PVDF, Robot hand

• 대한화학회지
• /
• 제20권4호
• /
• pp.277-279
• /
• 1976

은 전극을 지시전극으로 하고 표준칼로멜 전극을 기준전극으로 하여 전압플로위회로를 이용하여 수용액에서 2,5-dimercapto-1,3,4-thiadiazole에 의한 구리의 전위차 적정법을 연구하였다. 이 시약은 구리의 전위차 적정 정량에 뛰어나게 이용할 수 있었고 여러가지 가리움제를 사용하여 다른 이온들의 존재하에 대기중에서 미량의 구리를 직접 적정할 수 있었다.

• 대한소아치과학회지
• /
• 제11권1호
• /
• pp.169-179
• /
• 1984

The purpose of this study was to observe the effect of dental varnish applied with fluoride to dental pulp by comparing the groups of commercial fluoride product $Duraphat^{(R)}$, $Copalite^{(R)}$ after 1 Mole sodium fluoride application, Cavity $Sealer^{(R)}$ after 1 Mole sodium fluoride application with the control group not applied the dental varnish. After Cl V Cavity form was prepared on the buccal surface of the crowns with the total 75 teeth by using 5 dogs, average weight of 13.2Kg, dental varnish and silver analgram were placed. This study was performed by 3, 7, 21, 28, 56 days each. The dogs were sacrificed to extract the teeth, cut at the apical one fourth, and prepared histologic examination by fixing with 10% buffered formalin perfusion at sacrifice and decalcification in 10% nitric acid. The specimens were embedded in paraffin, stained with Hematoxylin and Eosin, and serially sectioned with 6 ${\mu}$width each. Microscopic evaluation of serial sections at the various time periods among the different groups revealed the following results: 1. In the control group, the marked change of the odontoblastic layer was showed on the 3 days group, and it was decreased gradually. Healing response, such as hyperplasia, was seen on the 28 days group and it was continued to the 56 days group. 2. In the experimental group with Cavity $Sealer,^{(R)}$ a slight hemorrhage was seen in the odontoblastic layer on the 3 days group, and the healing response with the hyperplasia of the odontoblast was showed on the 21, 28 days group. It was completely healed on the 56 days group. 3. In the Duraphat R group, a slight hemorrhage showed on the 3 days group and the disarrangement of the Odontoblastic layer was seen on the 7, 21, 28 days group. Odontoblasts showed hyperplasia on the 28 days group, and healed completely on the 56 days group. 4. In the $Copalite^{(R)}$ group, the 7 days group showed remarkable hemorrhage in the odontoblastic layer and stroma, and also it showed reticular degeneration with the disarrangement of the odontoblastic layer and congestion. Each group showed disarrangement. Healing ability of this group was greater than that of the control group, but less than that of the $Duraphat^{(R)}$ and Cavity $Sealer^{(R)}$ group.

• 대한기계학회논문집A
• /
• 제30권4호
• /
• pp.364-372
• /
• 2006

In this paper, we present a finger tip tactile sensor which can detect contact normal force as well as slip. The sensor is made up of two different materials, such as polyvinylidene fluoride (PVDF) known as piezoelectric polymer, and pressure variable resistor ink. In order to detect slip on the surface of the object, two PVDF strips are arranged along the normal direction in the robot finger tip and the thumb tip. The surface electrode of the PVDF strip is fabricated using silk-screening technique with silver paste. Also a thin flexible force sensor is fabricated in the form of a matrix using pressure variable resistor ink in order to sense the static force. The developed tactile sensor is physically flexible and it can be deformed three-dimensionally to any shape so that it can be placed on anywhere on the curved surface. In addition, a tactile sensing system is developed, which includes miniaturized charge amplifier to amplify the small signal from the sensor, and the fast signal processing unit. The sensor system is evaluated experimentally and its effectiveness is validated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1808-1813
• /
• 2005

In this paper, we present the finger tip tactile sensor which can detect contact normal force as well as slip. The developed sensor is made of two different materials, such as polyvinylidene fluoride(PVDF) that is known as piezoelectric polymer and pressure variable resistor ink. In order to detect slip to surface of object, a PVDF strip is arranged along the normal direction in the robot finger tip and the thumb tip. The surface electrode of the PVDF strip is fabricated using silk-screening technique with silver paste. Also a thin flexible force sensor is fabricated in the form of a matrix using pressure variable resistor ink in order to sense the static force. The developed tactile sensor is physically flexible and it can be deformed three-dimensionally to any shape so that it can be placed on anywhere on the curved surface. In addition, we developed a tactile sensing system by miniaturizing the charge amplifier, in order to amplify the small signal from the sensor, and the fast signal processing unit. The sensor system is evaluated experimentally and its effectiveness is validated.

• 환경위생공학
• /
• 제6권2호
• /
• pp.17-31
• /
• 1991

The effects of environmental agents on health are great concern for all. It was recognized that each human has differential susceptibility to environmental effects. Susceptibility are changed by many factors includin gdevelopmpntal processes, genetic factors, nutritional stratus, preexisting disease conditions, life style and personal habits. Of all factors nutritional factors seem to be the area most modifiable. Consequently, It is an area that must be more thoroughly evaluated. In this paper, nutrient and environment interactions are reviewed briefly with published literatures. This paper deals with the influence of micronutrients(energy, protein and fat), Vitamins (vitamin 4, vitamin B-complex, vitamin C, vitamin D and vitamin I) and Minerals(calcium, iron, selenium, zinc and other minerls) on environmental effects. The role of arch nutrient was assessed in modifyine the expression of environmental pollutant toxicity with available litertures. In each nutrient section, the effect of environment was considered in following agents : heavy metals(lead, cadmium, mercury, silver and etc), inorganic agents(nitwits, sulfite, fluoride and etc), organic agents(benzene, carbon tatra-chloride, aflatoxin, auto dye, dialbrin etc), Irritant gas(ozone, carbon monooxide and etc), physical agents(X-irradiation, ultra violet, temperature and noise) and insectcides. The extent to which nutritional status modifies environmental effects 3nd its converse, how envirollments affects nutritional status is very complex. In deed, at the present time there are more than 50 chelnical/phycical agents that affect the nutrient metabolism and/or have their toxicity either directly diminished or enhanced by nutrients of those agents, small number of agents for each nutrients have sufficient evidence to warrant any reasonable degree of confidence in their hypothesized associtation. With these information at this present time it is hard to conclude that the recommended dietary allowance for each nutrient should be reconsidered.

• Journal of Microbiology and Biotechnology
• /
• 제34권2호
• /
• pp.436-456
• /
• 2024

Several thermostable proteases have been identified, yet only a handful have undergone the processes of cloning, comprehensive characterization, and full exploitation in various industrial applications. Our primary aim in this study was to clone a thermostable alkaline protease from a thermophilic bacterium and assess its potential for use in various industries. The research involved the amplification of the SpSKF4 protease gene, a thermostable alkaline serine protease obtained from the Geobacillus thermoglucosidasius SKF4 bacterium through polymerase chain reaction (PCR). The purified recombinant SpSKF4 protease was characterized, followed by evaluation of its possible industrial applications. The analysis of the gene sequence revealed an open reading frame (ORF) consisting of 1,206 bp, coding for a protein containing 401 amino acids. The cloned gene was expressed in Escherichia coli. The molecular weight of the enzyme was measured at 28 kDa using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The partially purified enzyme has its highest activity at a pH of 10 and a temperature of 80℃. In addition, the enzyme showed a half-life of 15 h at 80℃, and there was a 60% increase in its activity at 10 mM Ca²⁺ concentration. The activity of the protease was completely inhibited (100%) by phenylmethylsulfonyl fluoride (PMSF); however, the addition of sodium dodecyl sulfate (SDS) resulted in a 20% increase in activity. The enzyme was also stable in various organic solvents and in certain commercial detergents. Furthermore, the enzyme exhibited strong potential for industrial use, particularly as a detergent additive and for facilitating the recovery of silver from X-ray film.