• Bulletin of the Korean Chemical Society
• /
• v.22 no.10
• /
• pp.1076-1080
• /
• 2001

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.407-412
• /
• 2008

Purpose: Hydrofluoric acid(HF) is one of the most dangerous mineral acids with the dissociated fluoride ions. The initial corrosive burn is caused by free hydrogen ion, and the second and more severe burn is caused by penetration of fluoride ions into subcutaneous tissues. Silver is a cation producing dressing, an effective antimicrobial agent, but older silver-containing formulations are rapidly inactivated by wound environment, requiring frequent replenishment. But, $Acticoat^{(R)}$ is a relatively new form of silver dressing which helps avoid the problems of earlier agents. The aim of this study is to evaluate effects of $Acticoat^{(R)}$, silver-containing dressing on the treatment for HF injury wound. Methods: From september 2006 to september 2007, the study was carried out with 10 patients who had HF partial thickness burns. $Acticoat^{(R)}$ dressing and 10% calcium gluconate wet gauze dressings in 10 cases. As a principle, in the emergency treatment, partial or complete removal of the nail and early bullectomy along with copious washing with normal saline was done, depending on the degree of HF invasion of the wound. Wound was dressed with $Acticoat^{(R)}$ and 10% calcium gluconate solution. The effect of dressing was investgated by serial bacterial culture and wound exudates assessment. Results: We therefore reviewed 10 cases of HF-induced chemical burns and treatment principle. The 10 cases who came to the hospital nearly immediately after the injury healed completely without sequelae. Conclusion: As the industrial sector develops, the use of HF is increasing more and more, leading to increased incidences of HF-induced chemical burns. The education of patients regarding this subject should be empathized accordingly. In conclusion, $Acticoat^{(R)}$ dressing is a better choice for HF partial thickness burn injuries because of shorter healing time, less pain and more comfortable dressing.

• Journal of the Korean Chemical Society
• /
• v.47 no.1
• /
• pp.26-30
• /
• 2003

The dinuclear $Ag_2[Phen]_2[S_2P(OPr)_2]_2$(phen=1,10-phenanthroline; Pr=propyl), was prepared by the reaction of bis(dipropyldithiophosphato) silver(I) complex with 1,10-phenanthroline ligand, and its structure was determined by X-ray crystallography. The two dipropyldithiophosphato ligands each bridge two silver atoms to form an eight-membered $Ag_2S_4P_2$ ring, while the 1,10-phenanthroline molecule coordinates to a silver atom to complete the local tetrahedral geometry for the metal ion. The Ag-S bond distances are 2.559(1) and 2.567(1)${\AA}$, and the Ag-N bond distances are 2.366(3) and 2.471(3)${\AA}$.

• Journal of the Korean Applied Science and Technology
• /
• v.14 no.1
• /
• pp.61-76
• /
• 1997

Triacylglycerols of the seeds of Ginkgo biloba have been resolved by high-performace liquid chromatography(HPLC} in the silver-ion and reverse-phase modes. The fatty acids were identified by a combination of capillary gas chromatography and gas-chromatography /mass spectrometry as the methyl and /or picolinyl ester. The main components are $C_{18:2{\omega}6}$(39.0mol%), $C_{18:1{\omega}7}$(asclepic acid 21.5mol%), and $C_{18:1{\omega}9}$(oleic acid, 13.8mol%). Considerable amounts of unusual acid such as $C_{20:3{\Delta}^{5,11,14}$ (5.7mol%), $C_{18:2{\Delta}^{5,9}$(2.8mol%), and $C_{18:3}{\Delta}^{5,9,12}$(1.6mol%), were checked. In addition, an anteiso-branched fatty acid, 14-methylhexadecanoic acid, was also present as a minor component(0.9 mol%). The triacylglycerols were separated into 17 fractions by reverse-phase HPLC, and the fractionation was achieved according to the partition numnber(PN) in which a ${\Delta}^5$-non methylene interrupted double bond($^5$-NMDB) showed different behaviour from a methylene interrupted double bond in a molecule with a given cahinlength. Silver-ion HPLC exhibited excellent resolution in which fractions(23 fractions) were resolved on the basis of the number and configuration of double bonds. In this instance, the strength of interaction of a ${\Delta}^5$-NMDB system with silver ions seemed to be weaker than a methylene interrupted double bond system. The principal triacylglycerol species are as follows ; $(C_{18:2{\omega}6)2}/C_{18:1{\omega}7}$, $C_{18:1{\omega}9}/C_{18:1{\omega}7}/C_{18:2{\omega}6}$, $(C_{18:1{\omega}7)2}/C_{18:2{\omega}6}$, $C_{16:1{\omega}7}/C_{18:1{\omega}9}/C_{20:3}{\Delta}^{5,11,14}$, $C_{16:1{\omega}7}/C_{18:1{\omega}7}/C_{20:3}{\Delta}^{5,11,14}$, $C_{18:1{\omega}9}/C_{18:1{\omega}7}/C_{18:2{\omega}6}$, $C_{18:1{\omega}9}/C_{18:2}{\Delta}^{5,5}/C_{20:3}{\Delta}^{5,11,14}$, $(C_{18:1{\omega}7)2}/C_{18:2{\omega}6}$ and $(C_{18:1{\omega}9)2}/C_{18:2{\omega}6}$, while simple triacylglycerols without $C_{18:2{\omega}6})_3$ were not present. Stereospecific analysis showed that fatty acids with ${\Delta}^5$-NMDB system and saturated chains were predominantly located at the site of sn-3 carbon of glycerol backbones. It is evident that there is asymmetry in the distribution of fatty acids in the TG molecules of Ginkgo nut oils.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.81-87
• /
• 2006

The industrial systems contain many sites and components susceptible to biofilms formation. Biofilms play an important role in microbial growth and industrial fouling. Thus, the control of the biofilms in industrial systems has been emphasized, however, the efficient controlling method was not provided yet. Since silver compounds have no residual and corrosion problem, the interest for silver compounds as a biofilm control disinfectant has been increased. In this study, we attempted to examine the disinfection ability of silver compounds. The disinfection efficiency of two silver compounds(silver ion and silver oxide) were evaluated for biofilms in comparison with suspended cells using well known indicator microorganisms(E. coli, P. aeruginosa) and compared with that of chlorine. Silver compounds were found to be effective in inactivating E. coli and P. aeruginosa biofilms. The reason for superiority of silver compounds as biofilm disinfectant was suggested by that silver can penetrate into the inner biofilm matrix faster than chlorine without consumption. This study reports that the disinfectant which is highly effective in inactivating the suspended cells in water becomes the less effective for controlling biofilm because of its high reactivity. This results imply that the effective strategy for biofilm control can be achieved by considering thoroughly the chemical nature of disinfects and biofilm structure and the reactivity between them.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.957-966
• /
• 1994

The transformation of butanes and 1-butene into aromatic compounds was performed over HZSM-5 catalyst and its Ag ion-exchanged form. The yield of aromatic hydrocarbons appreciably increased by incorporating silver cations into HZSM-5. The silver cations serve as catalysts for dehydrogenation of the starting hydrocarbons. $Ag^+$ ions could be reduced to $Ag^0$ metals with resulting in the formation of acidic OH grops by hydrogen produced during the dehydrogenation of butanes and 1-butene. The reaction of 1-butene over ZSM-5 with different loading of Ag was carried out to investigate the effect of acidic properties of these catalysts.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.3
• /
• pp.157-162
• /
• 2011

We report a simple route for synthesizing multi-dimensional structured silicon anode materials from commercially available bulk silicon powders via metal-assisted chemical etching process. In the first step, silver catalyst was deposited onto the surface of bulk silicon via a galvanic displacement reaction. Next, the silver-decorated silicon particles were chemically etched in a mixture of hydrofluoric acid and hydrogen peroxide to make multi-dimensional silicon consisting of one-dimensional silicon nanowires and micro-scale silicon cores. As-synthesized silicon particles were coated with a carbon via thermal decomposition of acetylene gas. The carbon-coated multi-dimensional silicon anodes exhibited excellent electrochemical properties, including a high specific capacity (1800 mAh/g), a stable cycling retention (cycling retention of 89% after 20 cycles), and a high rate capability (71% at 3 C rate, compared to 0.1 C rate). This process is a simple and mass-productive (yield of 40-50%), thus opens up an effective route to make a high-performance silicon anode materials for lithiumion batteries.

• Analytical Science and Technology
• /
• v.22 no.6
• /
• pp.519-523
• /
• 2009

$^{129}I$ is especially one of the most harmful radioactive elements because of its long half-life ($t_{1/2}$=$1.7{\times}10^7$ yr). The efficient removal of iodide ($I^-$) and iodate (${IO_3}^-$) in a aqueous solution by adsorption using activated alumina and activated carbon was studied. The removal efficiency was over 99% for iodide ion with silver treated basic alumina and iodate ion with acidic alumina or silver treated acidic alumina without any chemical addition or physical treatments.

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.393-398
• /
• 2006

There have been a lot of works in order to develop an excellent adsorbent for separation of olefin and paraffin. In the present work, the adsorption characteristics of mesoporous MCM-41 containing silver ion for 1-butene and n-butane were studied. The adsorption ability for the 1-butene depending on thermal treatment were also investigated.MCM-41 exhibits much higher adsorption amounts for 1-butene as well as n-butane, compared to those of Ag/13X zeolite. In case of MCM-41 containing silver ion, the adsorption amount of 1-butene dramatically increased due to the ${\pi}$-complexation, whereas the adsorption amount of n-butane decrease. The Ag/MCM-41 after the thermal treatment at 373 K under evacuation exhibit the highest 1-butene/n-butane adsorption ratio, expecially at low pressure (100 Torr).

• Bulletin of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.23-26
• /
• 2003

Titanium acetylacetonate was used in the construction of a PVC-based membrane electrode. This sensor shows very good selectivity for iodide ion over a wide variety of common inorganic and organic anions. It exhibits Nernstian behavior with a slope of 59.1 mV per decade. The working concentration ranges of the sensor are with a detection limit of $3.0\;{\times}\;10^{-6}\;M$. The response time of the sensor is very fast (<8 s), and can be used for at least twelve weeks in the pH range of 4.0-9.2. The best performance was obtained with a membrane composition of 30% PVC, 65% dibutylphthalate, 3% titanium acetylacetonate and 2% hexadecyltrimethylammonium bromide. The proposed sensor was successfully applied as an indicator electrode for titration of iodide with silver ion.