• Applied Microscopy
• /
• v.34 no.1
• /
• pp.31-42
• /
• 2004

Acute respiratory distress syndrome (ARDS) is a kind of acute lung injury characterized by inflammatory disruption of alveolar-capillary barrier and notorious for its high mortality. Neutrophils cause cell damage through the production of free radicals, inflammatory mediators, and proteases in ARDS. $PLA_2$ might serve a primary regulatory role in the activation of neutrophils. This present study was performed to elucidate the effect of rutin known as $PLA_2$ inhibitor on ARDS induced by endotoxin. Endotoxin had increased lung myeloperoxidase (MPO) activity, BAL (bronchoalveolar lavage) protein content, numbers of neutrophils in BALF (bronchoalveolar lavage fluid) compared with those of control rat (p<0.001). In addition, histological evidence of lung injury was correlated with neutrophil influx into alveolar space and cerrous perhydroxide granules were found in lining of endothelial cell, alveolar type I, II cells. In contrast, pretreated group of rutin had significantly decreased all of the parameters (p<0.001). These data suggest that inhibition of $PLA_2$ is one step approach that block the process of ARDS. Accordingly, we conclude that rutin can be used as the prophylactic agent for ARDS on the bases of these experimental results.

• Journal of the Korean Chemical Society
• /
• v.38 no.3
• /
• pp.186-196
• /
• 1994

Three fully dehydrated partially $Ag^+$-exchanged zeolite A(Ag_4Na_8-A, Ag_6Na_6-A, and Ag_8Na_4-A) were treated at $250^{\circ}C$ with 0.1 torr Rb vapor at 4 h. Their structures were determined by singlecrystal X-ray diffraction methods in the cubic space group $Pm{\bar3}m$ (a = 12.264(4) $\AA$, a = 12.269(1) $\AA$, and a= 12.332(3) $\AA$, respectively) at $22(1)^{\circ}C$, and were refined to the final error indices, R(weighed), of 0.056 with 131 reflections, 0.068 with 108 reflections, and 0.070 with 94 reflections, respectively, for which I > $3\sigma(I).$ In these structures, Rb species are found at three different crystallographic sites; three $Rb^+$ ions per unit cell are located at 8-ring centers, ca. 6.0∼6.8 $Rb^+$ ions are found opposite 6-rings on threefold axes in the large cavity, and ca. 2.5 $Rb^+$ ions are found on three fold axes in the sodalite unit. Also, Ag species are found at two different crystallographic sites; ca. 0.6∼1.0 $Ag^+$ ion lies opposite 4-rings and about 1.8∼4.2 Ag atoms are located near the center of the large cavity. In these structures, the numbers of Ag atoms per unit cell are 1.8, 3.0, and 4.2, respectively, and these are likely to form hexasilver clusters at the centers of the large cavities. The $Rb^+$ ions, by blocking 8-rings, may have prevented silver atoms from migrating out of the structure. Each hexasilver cluster is stabilized by coordination to 6-ring, 8-ring $Rb^+$ ions, and also by coordination to a 4-ring $Ag^+$ ion.

• Journal of Life Science
• /
• v.23 no.4
• /
• pp.542-553
• /
• 2013

The aim of this work was to establish the optimal conditions for the production of cellobiase by a marine bacterium, Cellulophaga lytica LBH-14, using response-surface methodology (RSM). The optimal conditions of rice bran, ammonium chloride, and the initial pH of the medium for cell growth were 100.0 g/l, 5.00 g/l, and 7.0, respectively, whereas those for the production of cellobiase were 91.1 g/l, 9.02 g/l, and 6.6, respectively. The optimal concentrations of $K_2HPO_4$, NaCl, $MgSO_4{\cdot}_{7H2}O$, and $(NH_4)_2SO_4$ for cell growth were 6.25, 0.62, 0.28, and 0.42 g/l, respectively, whereas those for the production of cellobiase were 4.46, 0.36, 0.27, and 0.73 g/l, respectively. The optimal temperatures for cell growth and for the production of cellobiase by C. lytica LBH-14 were 35 and $25^{\circ}C$, respectively. The maximal production of cellobiase in a 100 L bioreactor under optimized conditions in this study was 92.3 U/ml, which was 5.4 times higher than that before optimization. In this study, rice bran and ammonium chloride were developed as carbon and nitrogen sources for the production of cellobiase by C. lytica LBH-14. The time for the production of cellobiase by the marine bacterium with submerged fermentations was reduced from 7 to 3 days, which resulted in enhanced productivity of cellobiase and a decrease in its production cost. This study found that the optimal conditions for the production of cellobiase were different from those of CMCase by C. lytica LBH-14.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.191-203
• /
• 2005

It was to study a following research of "A Kinematical Traits Analysis when Performing Uchimata(inner thigh reaping throw) by Posture and Voluntary Resistance Levels(VRL) of Uke in Judo[1]" and. "A Case Study of Center of Gravity(COG) when Performing Uchimata(inner thigh reaping throw) by Posture and Voluntary Resistance Levels(VRL) of Uke in Judo[II]". The purpose of this study was to analyze an angular momentum of trunk and lower extremity when performing uchimata by two postures and voluntary resistance levels(VRL) of uke(reciver) in Judo. The subjects, who were one male judoka(YH) for 1992 Barcelona Olympic Games Olympian(silver medalist), was filmed on two S-VHS 16mm video cameras(60fields/sec.) through 3-dimensional motion analysis methods, that postures of uke were shizenhontai (straight natural posture:NP) and jigohontai (straight defensive posture:DP), VRL of uke were 0% and 100%, respectively. The variables were angular momentum of trunk, lower extremity of attacking leg and supporting leg of tori(the thrower). The data of this study collection were digitized by SIMI Motion Program computed the mean values and the standard deviation calculated for each variables. When performing uchimata according to each posture and VRL of uke and classifying. From the data analysis and discussion, the conclusions were as follows : Angular momentum of trunk when performing uchimata was showed the largest among another angular momenta, and the posture displayed more different than resistant of uke(reciver), but the pattern similar in judo. Angular momentum of trunk of X axis was the largest and Y, Z axis order. Angular momentum of attacking the thigh-leg when performing uchimata was showed the largest among another angular momenta, and the posture displayed more different than resistant of uke(reciver), X axis and Y axis similar, but angular momentum of Z axis of thigh-leg the largest, in kake(application) event in 0% resistance of DP than other variables. Angular momentum in X,Y axis of attacking the lower-leg when performing uchimata was showed that the resistance level displayed more different than posture, but Z axis the largest, in kake(E3) phase in 0% resistance of DP than other variables as same thigh-leg, and the largest from tsukuri(set-up:E2) to kake(E3) phase. X and Z axis Angular momentum of supporting the thigh-leg were similar, regardless of posture and resistance of uke, but Y axis was resistance level. Angular momentum of supporting the thigh-leg was showed the largest in X axis, increased from EO event to E2, and decreased in E3, and angular momenta of Y, X axis were showed the largest in kuzushi(balance breaking) phase when performing uchimata. Angular momentum of supporting the lower leg were similar pattern, regardless of posture and resistance of uke, in Y axis, resistance displayed more difficult the position in NP, and showed opposite angular momentum in tsukuri phase. In conclusion, angular momentum of trunk when performing uchimata was showed the largest, and pattern was similar, regardless of posture than resistant of uke(reciver), magnitude and direction were different each other, and uchimata was Ashi -waza(foot and leg techniques) division but important of trunk action.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.112-120
• /
• 2005

This study was done to evaluate whether there were any differences in microleakage of class V composite restorations according to restoration site and cavity size. Total sixty-four restorations were made in molar teeth using Esthet-X. Small ($2\;{\times}\;2\;{\times}\;1.5\;mm$) and large ($4{\times}2{\times}1.5\;mm$) restorations were made at the buccal/lingual surface and the proximal surface each. After 1,000 times of thermocycling ($5^{\circ}\;-\;55^{\circ}C$), resin replica was made and the percentage of marginal gap to the whole periphery of the restoration was estimated from SEM evaluation. Thermocycled tooth was dye penetrated with $50\%$ silver nitrate solution. After imbedding in an auto-curing resin, it was serially ground with a thickness of 0.25 mm. Volumetric microleakage was estimated after reconstructing three dimensionally. Two-way ANOVA and independent T-test for dye volume, Mann-Whitney U test for the percentage of marginal gap, Spearman's rho test for the relationship between two techniques were used, The results were as follows : 1. The site and size of the restoration affected on the microleakage of restoration. Namely, much more leakage was seen in the proximal and the large restorations rather than the buccal/lingual and the small restorations. 2. Close relationship was found between two techniques (Correlation coefficient = 0.614/ P = 0.000). Within the limits of this study, it was noted that proximal and the large restorations leaked more than buccal/lingual and the small restorations. Therefore, it should be strictly recommended large exposure of margins should be avoided by reducing unnecessary tooth reduction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1256-1264
• /
• 2011

Infant formula is one of the main nutritional sources for infants. In this study, the fatty acid compositions of Korean (domestic, n=8) and foreign infant formulas (n=3) were analyzed. Crude fats were extracted using the Folch method, and fatty acid compositions (total and positional) were analyzed by gas chromatography. In the fatty acid compositions of infant formulas, oleic (19.88~44.64%), palmitic (7.59~21.65%) and linoleic acids (16.72~25.87%) were the major fatty acids. Domestic infant formula products contained 35.94~56.55% total saturated fatty acid content, whereas that of foreign infant formula ranged from 34.40~42.88%. The content of monounsaturated fatty acids ranged from 20.23~44.99% in domestic products and 34.11~45.07% in foreign products. In addition, 0.17~2.57% arachidonic acid/docosahexaenoic acid and 10~13% linoleic acid/linolenic acid were detected in the analyzed products (domestic and foreign products). A small amount of trans fatty acids (0.25~1.69%) were found. In sn-2 position analysis, palmitic acids (1.84~38.74%) were detected in the analyzed formulas. Further, typical triacylglycerols in human milk, including 1,3-di-monounsaturated-2-saturated triacylglycerol, were not detected in the analyzed formulas.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.17-27
• /
• 1981

This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.1
• /
• pp.24-32
• /
• 2000

Purpose: Microsatellite instability(MSI) is frequently used as an indicator of microsatellite mutator phenotype(MMP) tumors. MSI has been observed in a percentage of non-small cell lung cancer(NSCLC). However, its role in tumorigenesis of NSCLC remains unknown. The frequency and pattern of MSI in NSCLC were evaluated and clinical parameters of MSI-positive tumors with those of MSS(microsatellite stable) tumors were compared. Materials and Methods: Twenty surgically resected NSCLCs were analyzed for 15 microsatellite markers located at chromosomes 3p and 9p. The peripheral blood lymphocytes of patients were used as the source of the normal DNA. Results: 1) Of 20 cases, 8(40%) demonstrated MSI. 2) Instability was observed more frequently in tri- and tetra-nucleotide repeats than in dinucleotide repeats. In all cases, instability appeared as a shift of individual allelic bands. 3) LDH was observed in 10(50%) of 20 tumors analyzed. 4) Of 20 cases, MSI-H tumor(showing MSI in the majority of markers) was absent. There were 5 MSI-L tumors(showing MSI in a greater than 10% of markers). 5) No significant difference was observed between MSI-L tumors and MSI-negative tumors in terms of clinicopathologic features such as pack-year history of smoking, histologic subtype, and(delete) stage of disease. There was also no significant difference in the incidence of LDH in relation to the status of MSI. Conclusion: These data strongly suggest that MSI plays different roles in lung and colon cancer. MMP pathway appears to be far less important in the tumorigenesis of NSCLC, caused mainly by cigarette smoke, with little familial tendency.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.4
• /
• pp.352-358
• /
• 2005

Microsatellites are short tandem repeated nucleotide sequences that are present throughout the human genome. Variations in the repeat number or a loss of heterozygosity around the microsatellites have been termed a microsatellite alteration (MA). A MA reflects the genetic instability caused by an impairment in the DNA mismatch repair system and is suggested to be a novel tumorigenic mechanism. A number of studies have reported that MA in the DNA extracted from the plasma occurs at varying frequencies among patients with a non-small cell lung carcinoma (NSCLC). The genomic DNA from 9 subjects with a non-small cell lung cancer (squamous cell cancer 6, adenocarcinoma 2, non-small cell lung cancer1) and 9 age matched non-cancer control subjects (AMC: tuberculosis 3, other inflammatory lung disease 6) and 12 normal control subjects (NC) were extracted from the peripheral blood leukocytes and plasma. Three microsatellite loci were amplified with the primers targeting the Gene Bank sequence D21S1245, D3S1300, and D3S1234. MA in the form of an allelic loss or a band shift was examined with 6% polyacrylamide gel electrophoresis and silver staining. None (0/12) of the NC subjects less than 40 years of age showed a MA in any of the three markers, while 88.9%(8/9) of the AMC above 40 showed a MA in at least one of the three markers (p<0.05). Sixty percent(6/10) of the control subjects with a smoking history showed a MA in one of the three markers, while 9.1%(1/11) of the control subjects without smoking history showed a MA (p<0.05). However, not only did 66.7%(6/9) of lung cancer patients show a MA in at least one of the three markers but so did 88.9%(8/21) of the AMC patients (p>0.05). In conclusion, a MA in the D21S1245, D3S1300, and D3S1234 loci using DNA extracted from the plasma was detected in 66.7% of lung cancer while no MA was found in the young non-smoking control subjects. However, many of the non-cancer control subjects (aged smokers) also showed a MA, which compromised the specificity of the MA analysis as a screening test. Therefore, a further study with a larger sample size will be needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.369-378
• /
• 2003

Statement of Problem: Recently, resin cements have become more widely used and have been accepted as prominent luting cements. Current resin cements exhibit less microleakage than conventional luting cements. However, the constant contact with water and exposure to occlusal forces increase microleakage even in resin cements inevitably. Most bonding resins have been modified to contain a hydrophilic resin such as 2-hydroxyethylmethacrylate (HEMA) to overcome some of the problems associated with the hydrophobic nature of bonding resins. By virtue of these modifications, bonding resins absorb a significant amount of water, and there may also be significant stresses at bonding interfaces, which may adversely affect the longevity of restorations. Therefore the reinforcement of water stability of resin cement is indispensable in future study. Purpose: This study was conducted to examine the influence of water retention on microleakage of two resin cements over the period of 6 months. Materials and Methods: 32 extracted human teeth were used to test the microleakage of a single full veneer crown. Two resin cements with different components and adhesive properties - Panavia F (Kuraray Co., Osaka, Japan) and Super-Bond C&B (Sun Medical Co., Kyoto, Japan)- were investigated. The storage medium was the physiological saline solution changed every week for 1 month, 3 months, and 6 months. One group was tested after storage for 1 day. At the end of the each storage period, all specimens were exposed to thermocycling from $5^{\circ}C$ to $55^{\circ}C$ of 500 cycles and chewing simulation of 50,000 cycles, and then stained with 50% silver nitrate solution. The linear penetration of microleakage was measured using a stereoscopic microscope at ${\times}40$ magnification and a digital traveling micrometer with an accuracy of ${\pm}3{\mu}m$. Values were analyzed using two-way ANOVA test, Duncan's multiple range tests (DMRT). Results : Statistically significant difference of microleakage was shown in the 3-month group compared with the1-day or 1-month group in both systems (p<0.05) and there were statistically significant differences in microleakage between the 3-month group and the 6-month group in both systems (p<0.05). The two systems showed different tendency in the course of increased microleakage during 3 months. In Panavia F, microleakage increased slowly throughout the periods. In Super-Bond C&B, there was no significant increase of microleakage for 1 month, but there was statistically significant increase of microleakage for the next 2 months. For the mean microleakage for each period, in the 3-month group, microleakage of Super-Bond C&B was significantly greater than that of Panavia F. On the other hand, in the 6-month group, microleakage of Panavia F was significantly greater than that of Super-Bond C&B (p<0.05). Conclusion: Within the limitation of this study, water retention of two different bonding systems influence microleakage of resin cements. Further studies with the longer observation periods in viro are required in order to investigate water stability and the bonding durability of the resin cement. CLINICAL IMPLICATIONS Microleakage at the Cement-tooth interfaces did not necessarily result in the failure of the crowns. But it is considered to be a major factor influening the longerity of restorations. Further clinical approaches for decreasing the amount of microleakage are required.