• Journal of Ecology and Environment
• /
• v.45 no.4
• /
• pp.264-276
• /
• 2021

Background: Salt marshes provide a variety of ecosystem services; however, they are vulnerable to human activity, water level fluctuations, and climate change. Analyses of the relationships between plant communities and environmental conditions in salt marshes are expected to provide useful information for the prediction of changes during climate change. In this study, relationships between the current vegetation structure and environmental factors were evaluated in the tidal flat at the southern tip of Ganghwa, Korea, where salt marshes are well-developed. Results: The vegetation structure in Ganghwa salt marshes was divided into three groups by cluster analysis: group A, dominated by Phragmites communis; group B, dominated by Suaeda japonica; and group C, dominated by other taxa. As determined by PERMANOVA, the groups showed significant differences with respect to altitude, soil moisture, soil organic matter, salinity, sand, clay, and silt ratios. A canonical correspondence analysis based on the percent cover of each species in the quadrats showed that the proportion of sand increased as the altitude increased and S. japonica appeared in soil with a relatively high silt proportion, while P. communis was distributed in soil with low salinity. Conclusions: The distributions of three halophyte groups differed depending on the altitude, soil moisture, salinity, and soil organic matter, sand, silt, and clay contents. Pioneer species, such as S. japonica, appeared in soil with a relatively high silt content. The P. communis community survived under a wider range of soil textures than previously reported in the literature; the species was distributed in soils with relatively low salinity, with a range expansion toward the sea in areas with freshwater influx. The observed spatial distribution patterns may provide a basis for conservation under declining salt marshes.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.29-37
• /
• 1984

This study was made to find several significant relations among various physical and mechanical properties including cone penetration resistance. The alluvial clay samples were taken at the Daebul Reclaimed Tideland in Samhomyeon, Yeongamgun, Jeonranamdo. The results of the study are summarized as follows; 1.Most samples belong to medium or high plastic, inorganic, silty clay(clay contents;32-64%, silt contents; 36-68%, sand contents; 0-3%). The specific gravities range from 2.70 to 2.73, the unit weights from 1.45 to 1. 75g/cm$^3$, the natural moisture contents from 45 to 77%, the liquid limits from 32 to 56%. It is certain that the foundation is weak because the natural moisture contents are much higher than the liquid limits. 2.It is known from the shear tests that the unconfined compression strenghs vary from 0.09 to 0. 38kg/cm2, the cohesions from 0.05 to 0. 21kg/cm2, the internal friction angles from 0 to 3˚. 3.The consolidation tests show that the initial void ratios range from 1.25 to 2.28, the compression indeices from 0.43 to 0.84, the preconsolidation loads from 0.21 to 0.74kg/cm$^2$. 4.Cone penetration resistances are usually less than 5kg/cm$^2$ from ground surface to the depth of about 8m, and from S to l0kg/cm$^2$ in the layer below about 8m to hard layer. 5.The cohesion and cone penetration resistance are in proportion to the depth of soil layer. 6.The correlations between various physical and mechanical properties including cone penetration resistance for the alluvial clay samples are as follows; a) Wn=0.944C+ l2.733 (r=0.829) b) LL=0. 728Cy+6. 991 (r=0. 873) c) PI=0.659Cy-8.168 (r=0.860) d) rt=0. 0077(272-Wn) =2.092-0. 0077Wn (r=0. 859) e) 60=0. 035wn-0 447 (r=0. 893) f) C=0.380qw+0.031 (r=0.816) g) qu=0.0707qc+0.029 (r=0.810) h) C=0.018Z+0.055 (r=O.802) I) qc=0. 415Z+1, 438 (r=0. 943)

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.247-256
• /
• 2008

For the systematic scientific management of tidal flat sediment in Julpo bay of Korea, this study conducted a survey of particle composition, organic matter(l.L) and heavy metals for three lines ; including F, R and L lines in tidal flat sediment. Particle composition of tidal flat sediments consisted predominantly of clay at F line which was in right angle direction to the coast, whereas R and L lines were located horizontally along the coast and consisted predominantly of silt. Mean grain size values of tidal flat sediments were in the range of 3.7 ${\phi}{\sim}$10.4 ${\phi}$(average 7${\phi}$). The contents of heavy metals observed at R and L lines were lower than those at F line. The correlation analysis among heavy metals, organic matter and particle size was found to have a good interrelationship. For the evaluation of heavy metals pollution, two criteria of US NOAA and KEI(in Korea) were applied Heavy metals pollution level of tidal flat sediments belonged in Non polluted and Moderately polluted groups in US EPA criteria, and its pollution levels sat below ERL in NOAA criteria. The results of heavy metals pollution level obtained by KEI criteria were found to be less than the goal level.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1662-1672
• /
• 2016

To address physicochemical factors of yellow clay for removing Cochlodinium polykrikoides blooms, the correlation of removal efficiency with mineralogical characteristics of yellow clay collected from various areas was surveyed. Yellow clay from different localities showed the wide range of chemical compositions $SiO_2$ : 43~71%, $Al_2O_3$ : 13~26%, $Fe_2O_3$ : 5~14%, MgO : 0.4~1.8%, $K_2O$ : 0.6~3.3%, L.O.I.(Loss of Ignition) : 4.5~15%. The mineral compositions of yellow clay were mainly consisted of quartz and feldspar including small amounts of kaolinite, chlorite, and Fe-oxides. The result of size analysis showed that $6{\Phi}(31{\sim}16{\mu}m)$ and $7{\Phi}(16{\sim}8{\mu}m)$ were dominated sizes. The zeta-potential were in the range of -4.1~-20.7mV(average -13.7). As increasing removal efficiency of C. polykrikoides, contents of $Al_2O_3$, $Fe_2O_3$ and L.O.I. in yellow clay increased, whereas $SiO_2$ content decreased. Furthermore, the amounts of silt mineral and small particle were high when the removal efficiency was high. According to factor analysis using principle component analysis, two components of factor 1 and factor 2 showed 79% of the total variance, which is related to cohesion and adsorption. Inducing cell lysis of C. polykrikoides by cohension and adsorption between C. polykrikoides and yellow clay.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.35-45
• /
• 2010

The soil tests have been performed on the specimens obtained from about 1,150 sites including landslides and non-landslides areas in natural terrains for last 10 years. Based on the results of those tests, the average soil properties are estimated and the simple equations for estimating permeability are proposed according to geologic conditions. The average permeability in Granite and Mudstone sites is higher than other sites and the content of silt and clay in Mudstone and Gneiss sites is higher than other sites. The correlation analysis and the regression analysis were performed to estimate the coefficient of permeability according to geological conditions. As the result of the correlation analysis, the coefficient of permeability is selected as a dependent variable, and the silt and clay contents, the water contents and the dry unit weights are selected as independent variables. As the result of the regression analysis, the silt and clay contents and the void ratio were involved commonly in the linear regression equations according to geological conditions. To verify the proposed the linear regression equations, the measured result of the coefficient of permeability at other sites was compared with the result predicted with the proposed equations. As the result of comparison, there were a little bit different between them for some data. However the difference was relatively small. Therefore, the linear regression equations for estimating the coefficient of permeability according to geological conditions may be applied to Korean soils. However, these equations should be verified and corrected continuously to improve the accuracy.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.3
• /
• pp.290-295
• /
• 1993

To evaluate rice yield and changes of soil properties, 3 tillage methods including no tillage was tested in different soil textures, such as silty clay, sandy loam and silt loam fields. Hwaseongbyeo was transplanted by machine at May 28. Water and soil temperature of no tillage were lower than other plots, but differences of temperature were not larger in different treatments. Mean water requirement in depth of sandy loam field was larger than other textures, but that of silty clay field was smaller. The water requirement in depth of no tillage was larger by 1.4～2.2mm / day than the other plots. In the silty clay field, mineral contents, except Na$_2$O content, of rice plant of no tillage plot at the harvesting stage was higher than the other treatments. The rice yields in the no tillage plot were decreased by 18% in sandy loam, by 7% in silty clay and by 1% in silt loam respectively than the power tiller plots.

• Journal of Ecology and Environment
• /
• v.32 no.2
• /
• pp.115-121
• /
• 2009

In order to elucidate the mechanisms affecting plant distributions in the reclaimed dredging area in the Gwangyang steelworks, in the Gwangyang Bay, Korea, we examined soil characteristics and plant distributions in four study sites and a control site in the study area. Desalination occurring along a gradient with increasing elevation, resulting in decrease of soil pH, EC, P, K, Cl, Ca, Mg, and salt and an increase in soil T-N, silt, clay contents. From site 1 (the lowest-elevation site) to site 5 (the highest-elevation site), halophytes decreased in abundance and nonhalophytes increased. The dominant species in each site were: Phragmites communis, Limonium tetragonum, and 12 additional species at site 1, Carex pumila, Suaeda japonica, and 15 additional species at site 2, Spergularia marina, Scirpus planiculmis, and 22 additional species at site 3, Miscantus sinensis, Lespedeza bicolor, and 26 additional species at site 4 and Pinus thunberii, Rhododendron mucronulatum, and 39 additional species at site 5, which resembled a naturally-occurring P. thinbergii community. Cluster analysis of the vegetation data matrix grouped the 35 plots into 5 major groups, and cluster analysis using the soil environment data matrix revealed 4 major groups. CCA of the floristic and environmental data matrix showed a positive relationship of SAR, EC, Na, Cl, and Ca, which are related to salt, in the $1^{st}$ axis and $2^{nd}$ axis, but negative relationships for altitude, organic contents, silt, and clay contents. Notably, plant species in the reclaimed dredging area that were separated along the $1^{st}$ axis showed strong relationships with factors that related to salt. Long-term exposure to natural rainfall in the reclaimed dredging area changed the soil characteristics, such as salinity. This change in soil characteristics might alter the SAR, which affects plant survival strategies in a given habitat. These results strongly indicated that factors related to salt and elevation play important roles in determining the overall plant distribution in the reclaimed dredging area.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.41-41
• /
• 1995

In order to discuss the differences among the SMP(Surface Moisture Availability Parameter), by previous researchers on the basis of their own theoretical and empirical background, we assessed the SMP according to the soil types and volumetric soil water contents. The results are as follows. There are differences among all the five SMAPs. There''s a tendency that the larger grain size, the higher value of parameters. And they divided into two groups for their value: one group has parameters with exponential function and the other with cosine and linear function. The maximum difference between the two groups appears when the volumetric soil water contents are 0.07$m^3m^{-3}$ for sand, 0.l1$m^3m^{-3}$ for loam, 0.12 for clay, and 0.13$m^3m^{-3}$ for silt loam. So, these differences must be considered when we estimate the surface evaporation rate. From field data, the paddy field soil around Junam reservoir is classified as a silt has high wetness, 0.56. So, the parameter obtained from the field measurement is much higher than that of Clapp and Hornberger(1978)''s Table. This study treated the SMP for a certain point of time in winter season. But if we measured the soil water contents continuously, we could obtain better time-dependent parameter.

• Journal of Environmental Science International
• /
• v.4 no.5
• /
• pp.427-435
• /
• 1995

In order to discuss the differences among the SMP(Surface Moisture Availability Parameter), by previous researchers on the basis of their own theoretical and empirical background, we assessed the SMP according to the soil types and volumetric soil water contents. The results are as follows. There are differences among all the five SMAPs. There's a tendency that the larger grain size, the higher value of parameters. And they divided into two groups for their value: one group has parameters with exponential function and the other with cosine and linear function. The maximum difference between the two groups appears when the volumetric soil water contents are 0.07m3m-3 for sand, 0.l1m3m-3 for loam, 0.12 for clay, and 0.13m3m-3 for silt loam. So, these differences must be considered when we estimate the surface evaporation rate. From field data, the paddy field soil around Junam reservoir is classified as a silt has high wetness, 0.56. So, the parameter obtained from the field measurement is much higher than that of Clapp and Hornberger(1978)'s Table. This study treated the SMP for a certain point of time in winter season. But if we measured the soil water contents continuously, we could obtain better time-dependent parameter. Key words : SMAP(Surface Moisture Availability Parameter), Paddy field, Volumetric soil water content, Evaporation, Capillary potential.

• The Journal of Engineering Geology
• /
• v.27 no.1
• /
• pp.91-101
• /
• 2017

Fault materials has various properties depending on their areas, rock types, and components because they are formed by heterogeneous and complicated mechanisms. In this study, to understand the physical and mechanical properties of fault materials, 109 fault materials distributed in South Korea were collected to conduct various laboratory tests with them and analyze their physical and mechanical properties (unit weight, specific gravity, porosity, gravel content, silt/clay content, clay mineral content, friction angle, and cohesion) according to areas, rock types, and components. As for the physical and mechanical properties by rock type, gneiss shows the highest medians in the unit weight ($17.1kN/m^3$) and specific gravity (2.73), granite does so in the porosity (45.5%), schist does so in the gravel content (20.0 wt.%) and cohesion (38.1 kPa), and phyllite does so in the silt/clay content (54.4 wt.%), clay mineral content (30.1 wt.%), and friction angle ($38.2^{\circ}$). With regard to the physical and mechanical properties by component, fault gouge was shown to have lower values than cataclasite and damage zones in all factors other than porosity and silt/clay contents.