• Journal of Fashion Business
• /
• v.9 no.6
• /
• pp.29-38
• /
• 2005

Natural dyes have attracted the worldwide attention because of its environmental advantage over synthetic dyes. However, most of natural dyes are expensive for mass production, strongly season and source dependent, and hard to store. In this study, coffee waste were used as natural dye to create beautiful colors. Coffee waste is inexpensive and easy to store, and provides a comparatively regular quality regardless of seasonand source. The effects of mordant agent concentration and mordanting temperature on dyeing efficiency of silk fabrics were investigated. Coffee extract dyed silk showed brilliant colors, and the colors were different with the kind of mordants. Cu, Sn, and Al mordanted silks showed golden yellow with subtle change of hue and value, while Fe mordanted silk showed a brownish green color. The increase in mordant concentration did not always increase the dyeability, and 0.5% o.w.f. mordant concentration was enough to get a satifactory result. Mordanting temperature also had little effect on the dyeability in case of Al, Cu, and Sn mordanted fabrics. Only Fe mordanted fabrics showed a better dyeability in the increase in mordating temperature. Coffee extract dyeing is an effective way using waste as resource and can create brilliant colors with minimal amount of mordant and under mild mordanting condition.

• Journal of Sericultural and Entomological Science
• /
• v.34 no.2
• /
• pp.52-57
• /
• 1992

Using the new type auxiliary(K-1), dyeing experiment was done at the various dyeing conditions and the effects of auxiliary on the dyeing properties of acid milling dye for the silk fiber were dicussed. The results obtained were as follows; 1. The exhaust rate of acid milling dye was increased according to the auxiliary concentration at dyebath pH 7, But the increasing tendency of exhaust rate was decreased above auxiliary concentration 3% o. w. f.. 2. It was the same tendency of exhaust rate at dyebath pH 5, but the diffusion was more powerful at dyebath pH 7 than pH 5. 3. The decreasing ratio of exhaust rate according to dye concentration increasing was lower at auxiliary addition than auxiliary non-addition. 4. The exhaust rate curve according to increasing dyeing temperature showed the inflection point at auxiliary non-addition, but it was not observed in auxiliary addition. Consequently, it seems to be avoid that the occurrence of uneven dyeing at auxiliary addition.

• Textile Coloration and Finishing
• /
• v.11 no.3
• /
• pp.15-22
• /
• 1999

This study investigated the mordanting effect of natural mordants such as camellia ash, bean chaff ash and pyrolignite of iron(Iron(II) Acetate) on silk fabrics dyed with green tea extracts. Experimental variables include the conditions of extraction and dyeing, and types of natural mordants. Inorganic ion contents In natural mordants were analysed by Induced Coupled Plasma Atomic Emission Spectrometer. In the ash Al, Fe, Si and Mn were in % unit, Cr and Ni were detected in ppm unit, and in the aqueous extracts of the ash all the metal ions were in ppm unit. On the other hand, fairly high content of Al(2.13% ) in camellia ash extract and Fe(7.91% ) in the aqueous extracts of pyrolignite iron were detected. The absorbance intensity of green tea extracts in UV-Visible spectrum increased with the temperature and time of extraction. The maximum absorption wavelength of the extracts appeared at 272.5nm and 210.5nm. The US values of silk fabrics dyed with green tea extracts were increased with temperature and time of dyeing. Surface color of silk fabric dyed with green tea extracts was 9.1YR, but it was changed from 7.9YR to 7.5YR by camellia ash extract and 7.4YR to 6.4YR by bean chaff ash extract with increase in mordant concentration. Pre-mordanted and post-mordanted fabrics with pyrolignite of iron were changed from 1.4YR to 1.1R and 7.2P to 4.2P, respectively.

• Journal of Sericultural and Entomological Science
• /
• v.3
• /
• pp.1-11
• /
• 1963

This treatise is to set up a fundamental condition of checking silk lousiness and to set up a new improving method of cocoon bave lousiness after super refining treatment. It is also studied whether silk lousiness can be eliminated through the observation of the silk gland, or the lousiness can be able to improve through such a study. The conclusions obtained in this paper are as follows. 1. Silk lousiness is able to be observed most properly when the light direction and the fiber direction are parallel in plan view of the silk cloth and the greater the angle between them is, the less the lousiness is observed. When, however, the angle is greater than some specific angle(30$^{\circ}$), no more lousiness is observed. This specific angle is named by the author as Lousiness Horizontal Critical Angle. 2. Silk lousiness can be observed when the angle of light incidence against the silk cloth is six degrees, while the larger the angle is, the less the lousiness is observed. When, however, the angle is greater than same specific angle(45$^{\circ}$) the lousiness disappears. Such a specific angle is named by the author as Lousiness Vertical Critical Angle. 3. The best textile composition to decrease lousiness defect is plan weave, while twill and satin weave show more lousiness with the same silk fiber. 4. Lousiness was classified as Lousiness A, B, ana C of which A was the general lousiness, B was the group type, and C was the glucose type and the standard photographs for the lousiness grading of these types were prepared. 5. The proper soap-refining hours of silk for lousiness test was eight hours. 6. The greater the difference of fiber diameter between the cocoon single bave and the splitend was, the more lousiness was composed. The normal splitends were measured as 1/4-1/5 of the main fiber. 7. The lousiness was found at the cocoon shape ends more than other parts, and found at the middle cocoon layer than other layer which was imagined to be as a result of poor uniform bave spinning of silk worm. 8. Female cocoon had more lousiness than the male cocoon. 9. It was found that there was a great possibility to have the splitends through the observation of the anatomical silkgland, and the author reached a conclusion that the lousiness can be improved to a certain degree only by the elimination of abnormal silk gland from the breeding aspects. 10. The cocoon bave of the offspring after super refining lousiness test and selection showed more improved lousiness defect than that of the parents.

• Textile Coloration and Finishing
• /
• v.13 no.5
• /
• pp.306-311
• /
• 2001

Natural colorants haute attracted much attention all over the world because of their non-hazardous nature. The world is becoming increasingly aware of environmental Issues, such as ozone layer depletion, water pollution and waste disposal problems. The use of synthetic dyestuffs for their synthesis and application in the dyeing industries has been criticized due to introduction of contaminants into the environment. This has led to the desire to turn to the traditional, and more natural way of life. In this study, the colorants of extract of Ginkgo biloba bark were analysed and their dyeing properties on silk, wool and cotton were studied. It was found that uv-visible absorption spectra of extract of Ginkgo biloba bark showed two strong absorption Peaks in the range of 240 ∼400 In. From the result of IR spectra, the major ingredient of extract of Gikgo biloba bark seems to be the flavon which is one of the flavonoid derivatives. Silk, wool, and cotton dyed with the extract of Ginkgo biloba bark showed a reddish yellow color. Their color differences were increased drastically with repetition of dyeing by three times.

• Fashion & Textile Research Journal
• /
• v.2 no.2
• /
• pp.113-117
• /
• 2000

The extracts drawn out from Sophora japonica by methanol was concentrated. Using this concentrate the silk was dyed, 400% conc. of dyeing material, $80^{\circ}C$ temperature of dyeing, 30 min time of dyeing. The K/S value of silk fabric was the most efficient for the simmordanting method. On the other hand, the amount of absorbed mordant the Cu-mordant was largest mordants. The surface colors on the dyed fabric depended heavily upon mordants or mordanting methods. For all cases, the value of the dyed fabric was dark. for the mordanting, color difference was distinct when using the Fe-mordant. Lightfastness of the color fastness was best in Cu-mordant. The Fe-, Cu- mordant showed the greatest antimicrobial activity.

• Textile Coloration and Finishing
• /
• v.6 no.1
• /
• pp.19-27
• /
• 1994

Mimosa and Quebracho are, in general, tanned with leather skin, finished silk fabrics according to temperature, treatment time, tannin concetration, pH, and studies that relation between tannin weighting and various factors. This makes fundamental study on characteristic of tannin treated fabrics. and the results are as fallows : 1. λ$_{max}$ was found at 278.5nm for Mimosa. 279.5nm for Quebracho. Also a stability was good in standing time and heating. 2. The higher tannin treatment temprature was, the better tannin weighting effect was. But they were slightly decreased at over 8$0^{\circ}C$, and K/S was slowly increased. 3. As tannin treatment time increased, tannin weighting effect increased but they were decreased at over 8$0^{\circ}C$, 90min. 4. As tannin concentration increased, tannin weighting was increased. 5. In tannin weighting effect according to various pH conditions, the it's best range of pH were 3.5~5.5 of Mimosa, 2.5~3.5 of Quebracho.o.

• Journal of Sericultural and Entomological Science
• /
• v.32 no.1
• /
• pp.68-72
• /
• 1990

The color fastness of Korean silk fabrics was measured in this investigation. The sample fabrics under examination were divided into four groups, according to the processing cycle: 1) Plain dyeing(A-C) : 2) Yarn dyeing(D;E=Knitted fabric) ; 3) Direct printing(F-H) ; 4) Discharge Printing(I-P) : The following result can be obtained. Among the samples examined, both the plain-dyed(brilliant colours) and discharge-printed (put-in colours) fabrics show lower values of water, perspiration and ironing color fastness compared with those recommended by International Organization for Standardization(I. S. O.)

• The Korean Journal of Food And Nutrition
• /
• v.23 no.3
• /
• pp.392-398
• /
• 2010

The objective of this study was to assess improvements caused by silk sericin extract in blood glucose and lipid concentrations in the sera of streptozotocin(STZ, 55 mg/kg B.W., I.P. injection)-induced diabetic rats fed on experimental diets for 5 weeks. Serum concentrations of blood glucose, total cholesterol, atherosclerotic index, LDL, LDL-cholesterol, free cholesterol, cholesteryl ester ratio, triglyceride(TG) and phospholipids(PL) were remarkably higher in the diabetic group(group BSW) and STZ(I.P.)-plus-silk sericin extract group(group ESS) than in the control group(group CG, basal diet-plus-water). However, the serum concentrations of blood glucose, total cholesterol, atherosclerotic index, LDL, LDL-cholesterol, free cholesterol, cholesteryl ester ratio, TG and PL were lower in the ESS group than in the BSW group, whereas the ratio of HDL-cholesterol concentration to total cholesterol and HDL-cholesterol concentration in the ESS group were higher than in the BSW group. The activities of alkaline phosphatase(ALP) and aminotransferase(AST, ALT) in serum were lower in the ESS group than in the diabetic BSW group. The results shown above suggested that silk sericin extract effectively improves blood glucose and lipid concentrations in the sera of STZ-induced diabetic rats.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.2
• /
• pp.67-73
• /
• 2010

Whole process of textile printing is made by computer and it remarkably improves environment problem. This digital textile printing is becoming next step environment friendly textile printing method. But, still now range of textile possible for digital textile printing is limited, and also color analysis according to fiber types is not completed. The ink printed on the fabrics through DTP printer can be absorbed and fixed into textile without any blots by pre-treatment using suitable media solution for fabrics types. The chemical formulation of media solution used in the pre-treatment process varies according to the types of textiles and inks for DTP products. First, I studied reference books or articles about color analysis of digital textile printing. Second, I recorded pre-process, printing, post-process and coloring of silk, wool, nylon at same condition. After that, I analyzed $L^*\;a^*\;b^*$, Total K/S, ${\Delta}E$ and studied color intensity and coloring. According to this study, I suggested particular textile special for coloring and manual for affective coloring control. It showed that the performance of the digital printing on the Silk, Wool and Nylon blend fabrics treated by the media solution developed in this study was better than the one treated by the previous media solution for each single inks.