• Journal of information and communication convergence engineering
• /
• v.3 no.4
• /
• pp.179-183
• /
• 2005

A photodiode capable of obtaining a sufficient photo/ dark current ratio at both forward bias state and reverse bias state is proposed. The photodiode includes a glass substrate, an aluminum film formed as a lower electrode over the glass substrate, an alumina film formed as an insulator barrier over the aluminum film, a hydrogenated amorphous silicon film formed as a photo conduction layer over a portion of the alumina film, and a transparent conduction film formed as an upper electrode over the hydro-generated amorphous silicon film. A good quality alumina $(Al_2O_3)$ film is formed by oxidation of aluminum film using electrolyte solution of succinic acid. Alumina is used as a potential barrier between amorphous silicon and aluminum. It controls dark-current restriction. In case of photodiodes made by changing the formation condition of alumina, we can obtain a stable dark current $(\~10^{-12}A)$ in alumina thickness below $1000{\AA}$. At the reverse bias state of the negative voltage in ITO (Indium Tin Oxide), the photo current has substantially constant value of $5{\times}10^{-9}$ A at light scan of 100 1x. On the other hand, the photo/dark current ratios become higher at smaller thicknesses of the alumina film. Therefore, the alumina film is used as a thin insulator barrier, which is distinct from the conventional concept of forming the insulator barrier layer near the transparent conduction film. Also, the structure with the insulator thin barrier layer formed near the lower electrode, opposed to the ITO film, solves the interface problem of the ITO film because it provides an improved photo current/dark current ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.39-39
• /
• 2009

We fabricated p-channel TFTs based on poly Silicon. The 35nm thickness silicon dioxide layer structure got higher $I_{on}/I_{off}$ ratio, field-effect Mobility and output current than 10nm thickness. And 35nm layer showed low leakage current and threshold voltage. So, 35nm thickness silicon dioxide layer TFTs are faster reaction speed and lower power consumption than 10nm thickness.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1065-1068
• /
• 2003

For the first time, high quality ultra-thin strained Si/SiGe on Insulator (SGOI) substrate with total SGOI thickness( $T_{Si}$ + $T_{SiGe}$) of 13 nm is developed to combine the device benefits of strained silicon and SOI. In the case of 6- 10 nm-thick top silicon, 100-110 % $I_{d,sat}$ and electron mobility increase are shown in long channel nFET devices. However, 20-30% reduction of $I_{d,sat}$ and electron mobility are observed with 3 nm top silicon for the same long channel device. These results clearly show that the FETs operates with higher performance due to the strain enhancement from the insertion of SiGe layer between the top silicon layer and the buried oxide(BOX) layer. The performance degradation of the extremely thin( 3 nm ) top Si device can be attributed to the scattering of the majority carriers at the interfaces.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.83-88
• /
• 2003

The optoelectronic characteristics of semiconducto-atomic superlattice as a function of deposition temperature and annealing conditions have been studied. The nanocrystalline silicon/adsorbed oxygen superlattice formed by molecular beam epitaxy(MBE) system. As an experimental result, the superlattice with multilayer Si-O structure showed a stable photoluminescence(PL) and good insulating behavior with high breakdown voltage. This is very useful promise for Si-based optoelectronics and quantum devices as well as for the replacement of silicon-on-insulator (SOI) in ultra-high speed and lower power CMOS devices in the future, and it can be directly integrated with silicon ULSI processing.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.151-151
• /
• 2003

열화학기상증착법(Thermal-CVD)을 이용하여 SOI(snilicon-on-insulator)기판과 실리콘기판 상에 단결정 3C-SiC 이종박막을 동시에 성장하고, 그 특성을 비교 분석하였다. 결정성 평가로는 X-선 회절(XRD)분석과 Raman 산란 분광분석, 그리고 투과전자현미경을 이용하였고, 잔류 웅력 비교 분석으로는 laser scanning 방법 과 Raman 산란 분광분석의 3C-SiC LO peak의 위치변화, 그리고 X-선 회절분석의 3C-SiC(004) peak의 위치변화를 이용하였다. 그 결과 SOI 기판과 실리콘 기판상에 고품위의 단결정 3C-SiC 박막이 성장됨을 확인하였고, SOI 기판을 사용한 경우 실리콘 기판에 비해 성장된 3C-SiC 이종박막의 잔류 응력이 실제로 감소됨을 확인하였다.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.4
• /
• pp.129-132
• /
• 2004

The electrothermal characteristics of a high voltage LIGBT(Lateral Insulated Gate Bipolar Transistor) using thin silicon on insulator (SOI) and silicon on sapphire (SOS) such as thermal conductivity and sink is analyzed by MEDICI. The device simulations demonstrate that the thermal conductivity of the buried oxide is an important parameter for modeling of the thermal behavior of SOI devices. In this paper we simulated the thermal conductivity and temperature distribution of a SOI LIGBT with an insulator layer of SiO$_2$ and $Al_2$O$_3$ at before and after latch-up and verified that the SOI LIGBT with the $Al_2$O$_3$ insulator had good thermal conductivity and reliability.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.811-816
• /
• 2019

The silicon-adsorbed oxygen(Si-O) superlattice grown by ultra high vacuum-chemical vapor deposition(UHV-CVD) was introduced as an epitaxial barrier for silicon quantum electron devices. The current-voltage (I-V) measurement results show the stable and good insulating behavior with high breakdown voltage. It is apparent that the Si-O superlattice can serve as an epitaxially grown insulating layer as possible replacement of silicon-on-insulator(SOI). This thick barrier may be useful as an epitaxial insulating gate for field effect transistors(FETs). The rationale is that it should be possible to fabricate a FET on top of another FET, moving one step closer to the ultimate goal of future silicon-based three-dimensional integrated circuit(3DIC).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.285-285
• /
• 2011

최근 반도체 소자의 미세화에 따라, 단채널 효과에 의한 누설전류 및 소비전력의 증가 등이 문제되고 있다. 대표적인 휘발성 메모리인 dynammic random access memory (DRAM)의 경우, 소자의 집적화가 진행됨에 따라 저장되는 정보의 양을 유지하기 위해 캐패시터영역의 복잡한 공정을 요구하게 된다. 하나의 캐패시터와 하나의 트랜지스터로 이루어진 기존의 DRAM과 달리, single transistor (1T) DRAM은 silicon-on-insulator (SOI) 기술을 기반으로 하여, 하나의 트랜지스터로 DRAM 동작을 구현한다. 이러한 구조적인 이점 이외에도, 우수한 전기적 절연 특성과 기생 정전용량 및 소비 전력의 감소 등의 장점을 가지고 있다. 또한 strained-Si 층을 적용한 strained-Silicon-On-Insulator (sSOI) 기술을 이용하여, 전기적 특성 및 메모리 특성의 향상을 기대 할 수 있다. 본 연구에서는 sSOI 기판위에 1T-DRAM을 구현하였으며, impact ionization과 gate induced-drain-leakage (GIDL) 전류에 의한 메모리 구동 방법을 통해 sSOI 1T-DRAM의 메모리 특성을 평가하였다. 그 결과 strain 효과에 의한 전기적 특성의 향상을 확인하였으며, GIDL 전류를 이용한 메모리 구동 방법을 사용했을 경우 낮은 소비 전력과 개선된 메모리 윈도우를 확인하였다.

• The Journal of Information Technology
• /
• v.7 no.2
• /
• pp.69-76
• /
• 2004

This paper presents the results of spectral analysis about waveforms and leakage current waveforms on contaminated silicon insulators under various environment conditions.(salt fog, clean fog, rain). The larger the leakage current during 200ms, the higher the power spectrum at 60Hz. If contaminated insulators suffers from high salt density fog, the leakage current occurs with high crest value intermittently, results in the low spectrum. Analysis of leakage current data showed that this electrical activity was characterized by transient arcing behavior contaminants are deposited on the insulator surface during salt fog tests. This provides a path for the leakage current to flow along the surface of the insulator. It is important to have an indication of the pollution accumulation in order to evaluate the test performance of a particular insulator. If the drop in surface resistivity is severe enough, then the leakage current may escalate into service interrupting flashover that degrade power quality.

• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.522-530
• /
• 2019

We present simulation methods to accurately determine the transmission efficiency and far-field patterns (FFPs) of a shallow-etched waveguide grating antenna (WGA) formed on a silicon-on-insulator wafer based on the finite-difference time-domain (FDTD) approach. The directionality and the FFP of a WGA with >1-mm in length can be obtained reliably by simulating a truncated WGA structure using a three-dimensional FDTD method and a full-scale WGA using a two-dimensional FDTD with the effective index method. The developed FDTD methods are applied to the simulation of an optical phased array (OPA) composed of a uniformly spaced WGA array, and the steering-angle dependent transmission efficiency and FFPs are obtained in OPA structures having up to 128-channel WGAs.