• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1103-1107
• /
• 2005

Single-crystal silicon thin films on glass (SOG) and on fused-quartz (SOQ) were prepared using wafer bonding and hydrogen-induced layer transfer. Thinfilm transistors (TFTs) were subsequently fabricated. The high-temperature processed SOQ TFTs show better device performance than the low-temperature processed SOG TFTs. Tensile and compressive strain was measured respectively on SOQ and SOG. Consistent with the tensile strain, enhanced electron effective mobility was measured on the SOQ TFTs.

• 한국결정성장학회지
• /
• 제23권3호
• /
• pp.119-123
• /
• 2013

Most of the world's solar cells in photovoltaic industry are currently fabricated using crystalline silicon. Czochralski-grown silicon crystals are more expensive than multicrystalline silicon crystals. The future of solar-grade Czochralski-grown silicon crystals crucially depends on whether it is usable for the mass-production of high-efficiency solar cells or not. It is generally believed that the main obstacle for making solar-grade Czochralski-grown silicon crystals a perfect high-efficiency solar cell material is presently light-induced degradation problem. In this work, the substitution of boron with gallium in p-type silicon single crystal is studied as an alternative to reduce the extent of lifetime degradation. The diamond-wire sawing technology is employed to slice the silicon ingot. In this paper, the quality of the diamond wire-sawn gallium-doped silicon wafers is studied from the chemical, electrical and structural points of view. It is found that the characteristic of gallium-doped silicon wafers including texturing behavior and surface metallic impurities are same as that of conventional boron-doped Czochralski crystals.

• 한국결정성장학회지
• /
• 제26권5호
• /
• pp.171-174
• /
• 2016

The diamond wire sawing method to produce silicon wafers for the photovoltaic application is still a new and highly investigated wafering technology. This technology, featured as the higher productivity, lower wear of the wire, and easier recycling of the coolant, is expected to become the mainstream technique for slicing the silicon crystals. However, the saw marks on the wafer surface have to be investigated and improved. This paper discusses the removal of saw marks on diamond wire-sawn single crystalline silicon wafer. With a pretreatment step using tetramethyl ammonium hydroxide ($(CH_3)_4NOH$, TMAH) and conventional texturing process with KOH solution (1 % KOH, 8 % IPA, and DI water), the saw marks on the surface of the diamond wire-sawn silicon wafers can be effectively removed and they are invisible to naked eyes completely.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.363-366
• /
• 2003

In nanomachining processes, chemical effects are more dominant factor compared with physical deformation. For example, during the nanoscratch on a silicon surface in the atmosphere, micro protuberances are formed due to the mechanochemical reaction between the diamond tip and the surface. On the contrary, in case of chemically stable materials, such as ceramics or glasse, the surface protuberance are not formed. The purpose of this study is to understand effects of the mechanochemical reaction between tip and surfaces on deformation behaviors of hard-brittle materials. Nanometerscale elasoplastic deformation behavior of single crystal silicon (100) was characterized with the surface protuberance phenomena, and compared with that of borosilicate (Pyrex glass 7740).

• 한국결정성장학회지
• /
• 제18권4호
• /
• pp.137-139
• /
• 2008

Floating zone, neutron transmutation-doped and magnetic Czochralski silicon crystals are being widely used for fabrication power devices. To improve the quality of these devices and to decrease their production cost, it is necessary to use large-diameter wafers with high and uniform resistivity. Recent developments in the crystal growth technology of Czochralski silicon have enable to produce Czochralski silicon wafers with sufficient resistivity and with well-controlled, suitable concentration of oxygen. In addition, using Czoehralski silicon for substrate materials may offer economical benefits, First, Czoehralski silicon wafers might be cheaper than standard floating zone silicon wafers, Second, Czoehralski wafers are available up to diameter of 300 mm. Thus, very large area devices could be manufactured, which would entail significant saving in the costs, In this work, the conventional Czochralski silicon crystals were grown with higher oxygen concentrations using high pure polysilicon crystals. The silicon wafers were annealed by several steps in order to obtain saturated oxygen precipitation. In those wafers high resistivity over $5,000{\Omega}$ cm is kept even after thermal donor formation annealing.

• 한국결정학회지
• /
• 제11권4호
• /
• pp.207-211
• /
• 2000

In a Czochralski silicon single crystal, the relation between the growth twin and the crystal morphology was investigated. The growth twin is nucleated on the {111} facet planes near the growth ridges. When a {111} growth twin is formed in the <100> silicon crystal, the growth ridge where twin is nucleated will continuous through the twin plane. Other two ridges at the 90。 apart will be displaced about 33° and be deformed to facets. The ridge on the opposite side of twin nucleation will disappear by forming a slight hill. Because the growth ridges of silicon is due to the {111} planes, the variation in the growth ridge formation can be predicted clearly by considering the change of the {111} plane traces in the stereographic projection after twining.

• 한국정밀공학회지
• /
• 제33권1호
• /
• pp.11-16
• /
• 2016

Lithography techniques are generally used to manufacture nano-patterns on silicon, however, it is difficult to make a V-shaped pattern using these techniques. Although silicon is a brittle material, it can be treated as a ductile material if mechanically machined at extremely low force scale. The manufacturing technique of nano-patterns on single crystal silicon using a mechanical method was developed in this study. First, the linear pattern was machined on the silicon with increasing thrust force. Then, the correlation between measured cutting force and machined pattern was analyzed. Based on the analysis, the critical thrust force was quantitatively determined, and then the silicon was machined at a force lower than the critical thrust force. The machined pattern was observed using SEM and AFM to check for the occurrence of brittle fractures. Finally, the sharp V-shaped nano-pattern was manufactured on the single crystal silicon.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.449-455
• /
• 1997

KOH 용액을 이용한 단결정 실리콘의 이방성 식각 특성을 조사하였다. n형 (100) 단결정 실리콘 웨이퍼를 시료로 사용하였으며, 식각 비율이 월등히 작은 $SiO_2$층을 실리콘 식각의 마스크로 사용하였다. 실리콘의 식각속도와 식각상태는 KOH 용액의 농도와 온도조건 뿐만 아니라 용액의 균일도, 용액의 교반속도와 교반방향 등에 따라 큰 차이가 발생하였다. 실리콘의 식각 속도는 KOH 농도가 낮아질수록 증가하며, 온도는 높아질수록 증가하는 경향을 보였으며, 20 wt%~50 wt%의 농도 범위와 $50^{\circ}C~105^{\circ}C$의 온도 범위에서 식각속도는 $10\mu \textrm{m}/hr~250\mu\textrm{m}/hr$로서 큰 폭으로 변화하였다. 식각된 표면의 거칠기중 hillock의 발생은 (100)면과 (111)면의 식각 속도 비율이 커질수록 증가함을 알 수 있었다.

• 한국결정성장학회지
• /
• 제3권2호
• /
• pp.117-124
• /
• 1993

연속성장법은 crystal growth chamber의 상부에 있는 reservoir에서 원료 분말을 연속적으로 공급하면서 도가니 하부에 용융대를 형성시킨 후, 종자결정을 용융대에 dipping하여 회전시키면서 아래로 끌어내려 단결정을 성장시키는 방법이다. 본 연구에서는 연속 성장법을 이용하여 silicon 단결정을 육성시켰으며 연속성장에 영향을 미치는 인자는 critical melt level, 원료공급속도, 성장속도, graphite crucible과 gruphite susceptor의 형태, work coil의 위치에 따른 graphite susceptor의 수직온도구배, 중력과 종자결정의 회전에 의한 원심력이 용융대의 안정화에 미치는 영향과 용융액 표면에서 일어나는 소결현상에 관해 고찰하였다.

• 대한금속재료학회지
• /
• 제50권2호
• /
• pp.146-151
• /
• 2012

The present article shows how the fracture strength of single crystal silicon chips, which are generally used as semiconductor devices, is influenced by loading rate variation during a 3-point bending test. It was found that the fracture strength of the silicon chips slightly increases up to 4% with increasing loading rate for loading rates lower than 20 mm/min. Meanwhile, the fracture strength of the chips hardly increases with increase of loading rate to levels higher than 40 mm/min. However, there was an abrupt transition in the fracture strength within a loading rate range of 20 mm/min to 40 mm/min. This work explains through microscopic examination of the fracture surface of all test chips that such a big transition is related to the deflection of crack propagation direction from the (011) [${\bar{1}}00$] system to the (111) [${\bar{2}}11$] system in a particular loading rate (i.e. from 20 mm/min to 40 mm/min).