• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.369-374
• /
• 2008

This study is an inorganic foaming ceramic by sol-gel reaction in order to overcome weak point of insulator using in construction equipment. We shall be able to confirm as the existing product substitute is possible result of this study. The solution where the silicate, the ceramic powder and the additive are included which makes foaming ceramic slurry, then the insulator made by used $CO_2$ Sol-Gel reaction. There being will be able to manufacture the insulator where the economical efficiency is excellent confirmed at the start product which is completed. The recording gel time decreases when the silicate will increase. Uses the hydrogen peroxide and fe make foam, when additionally surface preparation the fluorine resin, the water tolerance increases and will be able to complement the weak point of the silicate which omits in the water. The case which will use the loess powder with the research method which sees specially was environment-friendly product and according to appearing, the physical properties of nonflammability.

• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1653-1668
• /
• 2005

Assembly of hybrid mesophases through the combination of amphiphilic block copolymers, acting as structuredirecting agents, and silicon sources using low acid catalyst concentration regimes is a versatile strategy to produce large quantities of high-quality ordered large-pore mesoporous silicas in a very reproducible manner. Controlling structural and textural properties is proven to be straightforward at low HCl concentrations with the adjustment of synthesis gel composition and the option of adding co-structure-directing molecules. In this account, we illustrate how various types of large-pore mesoporous silica can easily be prepared in high phase purity with tailored pore dimensions and tailored level of framework interconnectivity. Silica mesophases with two-dimensional hexagonal (p6mm) and three-dimensional cubi (Fm$\overline{3}$m, Im$\overline{3}$m and Ia$\overline{3}$d) symmetries are generated in aqueous solution by employing HCl concentrations in the range of 0.1−0.5 M and polyalkylene oxide-based triblock copolymers such as Pluronic P123 $(EO_{20}-PO_{70}-EO_{20})$ and Pluronic F127 $(EO_{106}-PO_{70}-EO_{106})$. Characterizations by powder X-ray diffraction, nitrogen physisorption, and transmission electron microscopy show that the mesoporous materials all possess high specific surface areas, high pore volumes and readily tunable pore diameters in narrow distribution of sizes ranging from 4 to 12 nm. Furthermore, we discuss our recent advances achieved in order to extend widely the phase domains in which single mesostructures are formed. Emphasis is put on the first synthetic product phase diagrams obtained in $SiO_2$-triblock copolymer-BuOH-$H_2O$ systems, with tuning amounts of butanol and silica source correspondingly. It is expected that the extended phase domains will allow designed synthesis of mesoporous silicas with targeted characteristics, offering vast prospects for future applications.

• Journal of Microbiology and Biotechnology
• /
• 제9권1호
• /
• pp.56-61
• /
• 1999

Pseudomonas sp. SW1 grew and produced biosurfactants on 3% hexadecane as the energy and carbon source. As a result of biosurfactant synthesis, the surface tension of the medium was reduced from 72 dyne/cm to 30 dyne/cm. The properties of biosurfactants that were purified from Pseudomonas sp. SW1 were investigated. The purification procedure included acid precipitation from culture supernatant, silica gel G60 column chromatography, and Sephadex G-150 gel filtration. The biosurfactants were separated into two different types, viz., types I and II. Biosurfactant type Isignificantly reduced the surface tension of water from 72 to 27 dyne/cm at concentration levels above 30 mg/l. The surface tension of water was reduced to a minimum of approximately 30 dyne/cm by biosurfactant type II at concentration levels over 80 mg/l. The biosurfactants were effective in a wide range of pHs, at NaCl concentrations of up to 4%, at $CaCl_2$ concentration up to 100 mM, and at temperatures up to $200^{\circ}C$ for 8 h.

• 대한한방내과학회지
• /
• 제1권1호
• /
• pp.64-69
• /
• 1976

Kami Eui In Tang is being used as a treatment oral medicament on the appendicitis and peritonitis without surgical operation resulting good effect. The component of the medicament are as follow : Coix ma yuen, Paeonia moutan, Patrinia scabiosifolia, Rheum, Coreanum, Cory-dalis nakaii, Trichosanthes kirilowii, Lonicera japonica, Prunus persica, Tarxacum officinale, Author tried to make clear the ant inflammatory effect on rat paw which has become edema formation by carrageenin and detect the active ingredients by thin layer chromatography method. The material was extracted with three kind of solvent; distilled water, 50% ethyl alcohol, and ether which were immersed in material for 48 hours and concentrated to 10ml by evaporation of solvents. The result was as follow: 1. The anti-inflammatory effect of the sample material on the. edema formed at the rat paw was obviously clear. 2. Many spots of active ingredients were detected on the silica gel G plate spotted by ether extracted material than water one. 3. The good developing solvent was the mixture of $CHCl_3$ ; Acetone : Diethylamine (5:4:1).

• 한국수소및신에너지학회논문집
• /
• 제1권1호
• /
• pp.9-14
• /
• 1989

Mixed photocatalyst containing cadmium sulfide and zinc sulfide was prepared on silica gel powder and Nafion film. Photo-irradiation of aqueous mixture containing the photocatalysis generated hydrogen by water cleavage reaction. Use of sodium sulfide as sacrificial reagent help the photo-reaction. Evolution of the hydrogen was measured by gas chromatographic analysis. Composition of the catalyst was determined by atomic absorption spectrophotometer. 0.2 mL of of hydrogen was generated per hour. The maximun catalytic activity was obtained after 8-12 hours later. Hydrogen generation efficiency by the two different catalytic system was compared and showed that the Nafion-based catalyst is more efficient than the silicagel-based catalyst for the photoreaction.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.165-168
• /
• 2002

TLC(Thin Layer Chromatography) 는 제약산업이나 생화학 연구 그리고 여러 산업 현장에서 널리 이용되는 화학 분석 방법이다 . 본 연구에서는 적은 비용으로도 많은 양의 시료를 신속하게 분리할 수 있는 TLC를 이용하여 유기산인 젖산 (Lactic acid) 을 분리는 전개방법을 개발하였다 . 전개용매는 2 가지 용매 (1) nitroethane nitromethane : ethanol: water: I-propanol = 1 : 2 : 3 : 4 : 5 (v/v/v/v/v), (2) diisopropyl ether. formic acid. water = 90 : 7 : 3 (v/v/v) 를 사용하였다 . 발색시약은 A : bromocresol purple reagent I, B . bromocresol purple reagent II, C : bromocresol green-bromophenol blue-potassium permanganate reagent 를 사용하여 분석하는 방법을 개발하였다 $^6)$. 젖산의 분리는 silica gel TLC plate를 이용하는 경우 , 용매 (1) 에 발색시약 B를 사용했을 때 , 분리 확인이 가장 좋았다.

• 설비공학논문집
• /
• 제27권2호
• /
• pp.94-102
• /
• 2015

A hydroscopic polymer is used as the adsorbent in an adsorption refrigeration system. A pair of plate-type heat exchangers, thinly coated with the polymer, is simulated using a two-dimensional transient model to predict performance of the system. It is predicted that the system would yield 0.57 kW SCP and 0.47 COP at $80^{\circ}C$ heating and $30^{\circ}C$ cooling temperatures. In comparison with a conventional silica gel-water system, the COP is comparable but SCP is about three times larger. The slow mass diffusion rate of the polymer should be improved for better performance.

• 식품저장과 가공산업
• /
• 제6권1호
• /
• pp.31-38
• /
• 2007

매실의 생리활성을 검정하여 신약개발 이나 건강기능성 식품 개발의 기초 자료 제공을 목적으로 실험한 결과는 아래와 같다. 1) methanol, water, hexane, ethylacetate 및 ether 추출물의 항균활성 검색 결과 methanol에서 가장 크게 나타났고, hexane과 ether에서는 유의적인 활성이 나타나지 않았다. 2) 품종별 차이는 적은 반면 수확시기가 늦어짐에 따라 항균활성이 증가함을 확인할 수 있었다. 3. 용매에 따른 전자공여능은 methanol > ethylacetate > water > ether > hexane 순으로 높게 나타났으며 품종간의 차이는 크지 않았다. 4) 매실 methanol 추출물을 silica gel column chromatography와 HPLC등을 이용해서 분리, 정제하였고 LC-Mass spectrum분석 결과를 LC-Mass에 내장된 Wiley Database와 비교한 결과 dl-Malic disodium salt 로 추정되었다.

• 대한환경공학회지
• /
• 제29권7호
• /
• pp.810-819
• /
• 2007

물유리와 수산화나트륨 용액을 이용하여 플라이 애쉬와 고로슬래그의 알칼리 활성에 관한 연구를 수행하였다. 플라이 애쉬/슬래그 시멘트 페이스트(FSC)의 반응생성물과 미세구조를 관찰하기 위하여 XRD, FTIR, $^{29}Si$ and $^{27}Al$ NMR, TGA and SEM 분석을 수행하였다. 무정형 상태 또는 저급 결정구조를 가진 calcium silicate hydrate와 aluminosilicate 겔이 각각 고로슬래그와 플라이 애쉬의 알칼리 활성반응에 의해 생성되었다. 실험결과, 물유리 모듈 1.0과 1.2가 플라이 애쉬와 고로슬래그의 알칼리 활성반응을 위해 적정한 것으로 나타났다. 물유리 모듈 1.0과 1.2로 알칼리 활성화된 FSC 페이스트는 플라이 애쉬와 고로슬래그의 알칼리 활성반응에 의해 생성된 겔 형태의 반응생성물과 물유리에 의한 또 다른 수화물(즉 실리카겔)에 의해 좀 더 단단하고 연속적이 모체가 형성되었음을 보여주었다.

• 접착 및 계면
• /
• 제16권3호
• /
• pp.116-121
• /
• 2015

본 연구에서는 발수성 재료로 쓰이고 상대적으로 가격이 비싼 불소계 실란을 대체하기 위해 octadecyltrichlorosilane (OTS)을 사용하였다. 코팅층의 기계적 접착강도를 향상시키기 위해 무기바인더를 산 촉매 하에서 졸-겔 반응에 의해 분산시켜 합성하였다. 합성된 실리카 나노입자는 나노크기의 거칠기를 제공하기 때문에 초소수성을 쉽게 얻기 어려우므로 유기용매에 의한 입자의 응집을 유도하였다. 실리카 나노입자의 적절한 크기 선택에 따라 OTS를 사용해서 표면을 소수화 시킨 후 유기용매의 양이 증가함에 따라 초소수성의 표면을 얻었고 극도의 물 반발 거동이 zero sliding angle과 함께 관찰되었다. 이러한 초소수성은 용매와의 혼합과 상관없이 유전상수가 25보다 작은 값을 가졌으며 용매 내에서 입자의 응집을 통해 유도된 초소수성 표면을 제조하는 것이 저유전상수 값에 대한 지표가 되었다.