• Smart Structures and Systems
• /
• 제23권1호
• /
• pp.71-79
• /
• 2019

In general, it may be advantageous to measure the pressure pulsation near a valve to detect a valve defect in a linear compressor. However, the acceleration signals are more advantageous for rapid classification in a mass-production line. This paper deals with the performance improvement of fault classification using only the compressor-shell acceleration signal based on the relation between the refrigerant pressure pulsation and the shell acceleration of the compressor. A transfer function was estimated experimentally to take into account the signal noise ratio between the pressure pulsation of the refrigerant in the suction pipe and the shell acceleration. The shell acceleration signal of the compressor was modified using this transfer function to improve the defect classification performance. The defect classification of the modified signal was evaluated in the acceleration signal in the frequency domain using Fisher's discriminant ratio (FDR). The defect classification method was validated by experimental data. By using the method presented, the classification of valve defects can be performed rapidly and efficiently during mass production.

• 문화기술의 융합
• /
• 제3권2호
• /
• pp.55-59
• /
• 2017

본 연구는 무선통신 방식에 따른 통신 코드를 통해 생체신호를 전달하는 과정을 확인하였다. 생체 시스템은 ECG, PPG, Bluetooth으로 구성하여 신호를 받았고, 통신방식은 국제표준으로 IEEE802.15.1에 따라 진행하였으며, 주파수이동에 필요한 대역통신방식으로 신호를 산출하여 전송하였다. 무선통신으로 받은 신호를 표현하기 위해 사용된 프로그램은 Serial Chart, Processing, App Inventor를 구성하여 신호가 원활하게 전송됨을 확인하였다. 따라서 신호처리에 따른 실시간 그래프를 위한 코드와 프로세싱을 활용한 Serial Chart 그래프의 정량적 유추가 진행되면 원활한 무선통신 방식의 개선효과가 있을 것으로 예상된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1237-1238
• /
• 2012

• 대한전자공학회논문지SP
• /
• 제37권6호
• /
• pp.76-82
• /
• 2000

선박의 수중방사소음을 최소화하기 위해서는 주요 소음원인 탑재장비, 추진계통 및 구조물의 전달과정 등에 의해 발생되는 각각의 소음특성 규명이 이루어져야 한다. 그러나 선박의 운항시 계측된 신호는 다중의 소음원과 많은 전달경로에 의해 신호가 중첩되어 발생되고, 소음원과 전달함수를 계측할 수 없는 경우가 많다. 이 논문에서는 캡스트럼 신호처리를 이용한 계측된 응답신호로부터 각각의 소음원과 전달함수 특성을 분리 추출할 수 있는 시험분석기법을 제시하고, 제시된 기법을 수치계산 및 가진실험에 적용하여 검증하고 실제 선박에 적용하여 유용함을 보인다.

• 한국소음진동공학회논문집
• /
• 제19권12호
• /
• pp.1260-1268
• /
• 2009

Three methods(the stepped sine method, the statistical method(random excitation method) and the maximum-length sequence(MLS) method) for head-related transfer functions(HRTFs) are experimentally compared in view point of accuracy and efficiency. First, the stepped sine method has high signal-to-noise ratio, but low efficiency. Second, the statistical method is fast measurement speed, but weak to noise than the other methods. Finally, the MLS method shows both good efficiency and high signal-to-noise ratio, but it needs additional software or equipment such as MLS signal generator. For comparison of measurement accuracy, HRTFs of KEMAR dummy are measured for various azimuths and elevations. Error norms for magnitude and phase of HRTFs are defined and calculated for the measured HRTFs. The calculated error norms show that the methods give similar results in magnitude and phase except a little phase difference in the MLS method.

• 전자공학회논문지B
• /
• 제33B권12호
• /
• pp.31-44
• /
• 1996

Since optical delay line signal processing which utilizes optical fiber as delay line elements can provide high speed and broadband signal processing, the optical delay line signal processing has numerous applications. Recently, many research papers which optical delay line signal processing techniques are being applied to OCDMA are published. The author has published paper on the design method for optical fiber filters of lattice structure. However, the previous design method does not realize the transfer function all the time. It can be realized with constraints. In this paper, we propose the design method that can realize the transfer function all the time without any constraints for the optical fiber filter of lattice structure.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.281-287
• /
• 1997

In the conventional inverse modeling method for on-line modeling of the secondary path transfer function, the signal to noise ratio between the arbitrary random signal and the plant noise have to keep at -10 - -20 dB. For these reasons, the modeling can't be exactly implemented by the conventional method alone and the convergence time for modeling becomes too long. In this study, by combining the conventional inverse modeling method with an adaptive line enhancer, or with an adaptive noise canceller, a rigorous transfer functions of secondary path modeling and the control of a primary noise have been implemented simultaneously.

• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.34-43
• /
• 2012

This paper describes system modeling and controller design method in the measured signal by discrete Fourier transform. Transfer function of the second order system is estimated by the dominant parameter which is computed in the magnitude and the phase of Fourier spectrum of the measured signal. In addition, the controller was designed by the estimated transfer function, and the results were compared. The proposed estimation method of transfer function contains only a very simple mathematical process. Therefore, it is effective to design the controller in the measured signal when the output of the system contains the characteristics of complex exponential functions case. The proposed method was applied on Op-Amp system to verify the efficiency and the reliability. The results show that the proposed algorithms are highly applicable to the system modeling and controller design in the measured data.

• 소음진동
• /
• 제9권5호
• /
• pp.943-948
• /
• 1999

This paper proposes a feasible and effective method for measuring the mechanical-acoustic transfer function by the application of equivalent area and velocity transfer function, a manifestation of the vibro-acoustical reciprocity principle. On the contrary to the volume velocity used in traditional method, the equivalent area is a peculiar raidation characteristics of sound sources and not influenced by any input signal for driving sound source. This invariant property of equivalent area can get rid of boresome works to measure the volume velocity of a sound source every time the driving signal is changed. Moreover, this method has a remarkable advantage to use a general loudspeaker as an accoustic exciter without the assumption of point source and can be applied to all kinds of sound sources even if they are not omni-directional sources.

• 전자공학회논문지S
• /
• 제35S권4호
• /
• pp.118-127
• /
• 1998

In this paper, we propose a voice personality transformation method which makes one person's voice sound like another person's voice. In order to transform the voice personality, vocal tract transfer function is used as a transformation parameter. Comparing with previous methods, the proposed method can obtain high-quality transformed speech with low computational complexity. Conversion between the vocal tract transfer functions is implemented by a linear mapping based on soft clustering. In this process, mean LPC cepstrum coefficients and mean removed LPC cepstrum modeled by the low dimensional vector are used as transformation parameters. To evaluate the performance of the proposed method, mapping rules are generated from 61 Korean words uttered by two male and one female speakers. These rules are then applied to 9 sentences uttered by the same persons, and objective evaluation and subjective listening tests for the transformed speech are performed.