• Journal of Positioning, Navigation, and Timing
• /
• 제10권1호
• /
• pp.21-28
• /
• 2021

In order to develop a Korea Positioning System (KPS) as part of key national infrastructure, independent navigation signal design is essential. The designed signal candidates must coexist with existing or planned GNSS signals within the limited frequency band. This requires a RF compatibility assessment, which can be performed using the Spectral Separation Coefficient (SSC) and Effective Carrier to Noise Density Ratio (Effective C/N0), for navigation signals. Thus, in this paper, the analysis of RF compatibility between the designed signal candidates and the existing GNSS signals is carried out based on analytical and numerical techniques.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.179-182
• /
• 1988

Since the bits in any encoded PCM word are of different importance to the bit positions, in order to improve the signal to noise ratio the technique that the encoded signal bits are weighted for the QPSK transmission system, is presented. Also the erasure zone is established at the detector, such that if the output falls into the erasure zone, the regenerated sample is replaced by interpolation. Two weighting methods are shown here. One is the method that the same weighting profile is used to Q and I dimension in QPSK signal constellations. The other is diferent weighting to Q and I dimension. The gains of this new technique in overall signal s/n compared to conventional QPSK transmission system were 5 db and 2db, respectively.

• 대한의용생체공학회:의공학회지
• /
• 제15권1호
• /
• pp.71-76
• /
• 1994

단일 쌍극자 모델을 이용한 source localization 문제에서 전극의 갯수, 쌍극자의 위치 및 방향 등이 S/N(signal to noise ratio)과 추정 오차사이의 관계에 미치는 영향을 Monte Carlo 시뮬레이션으로 조사했다. forward problem은 3중 구각 모델로 계산했고, simplex 방법으로 쌍극자 파라미터를 최적화시켰다. 전극의 갯수가 많을때, 쌍극자가 뇌 중심(midbrain)보다 대뇌 피질(cortex)부근에 있을 때, 쌍극자가 tangential 방향일 때 추정 오차의 평균과 표준편차가 작아졌다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.907-910
• /
• 1995

Though SLA(Stereolithography Apparatus) is being recognized as an innovative technology, it still can not be used to fully practical applications since it lacks of dimensional accuracy compared to conventional processes. In SLA, the accuracy of cured part depends upon the set of process parmeters. In order to improve the accuracy of SLA, this paper quantitatively evaluates how largely each process parameter of SLA contributes to the part accuracy and estimates the optimal set of process parameter which minimizes the dimensional errors of the test part, "letter-H" part. For this purpose, we use ANOVA(analysis of variance) and S/N(signal-to-noise)ratio of Taguchi method.hi method.

• 한국소음진동공학회논문집
• /
• 제13권2호
• /
• pp.83-91
• /
• 2003

Pantograph design Process must be considered in terms of stability of aerodynamics and reduction of aeroacoustics. Furthermore pantograph needs to be insensible to severe circumstance condition like typhoon, tunnel, a change of season. In this paper, robust design of panhead sections is conducted based on the Taguchi's design of experiment method. In the aeroacoustic noise analysis, an acoustic analogy using the Ffowcs Williams and Hawkings(FW-H) equation is used to calculate the flow induced sound pressure level in aeroacoustics. From the near-field CFD analysis data, the far-field noise is predicted at the positions of 25 m away from Pantograph. Based on aerodynamic(CFD) and aeroacoustic(FW-H) analysis data, the optimal sizing and Positioning of panhead elements are determined using robust design optimization method. Design parameters such as thickness, length and radius are controllable factors, while outdoor air temperature and atmospheric pressure are considered as uncontrollable factors in the context of Taguchi's approach. A number of CFD simulation and aeroacoustic analysis are performed based on orthogonal arrays. In this paper, two-step optimization method is used as a parameter design procedure. It is executed using signal to noise(S/N) ratio and analysis of means(ANOM) method. So Thus, an optimal level of design parameters Is extracted to minimize the disconnection ration between contact strips and catenary system, and reduce the far-field aeroacoustic noise.

• 한국통신학회논문지
• /
• 제34권1C호
• /
• pp.131-137
• /
• 2009

Bin offset carrier (BOC) 신호 동기화 과정은 GPS, Galileo와 같은 위성항법시스템에서 가장 중요한 단계이다. BOC 신호 동기화 과정은 일반적으로, 수신 BOC 신호와 단말기의 BOC 신호 사이의 상관함수를 이용하여 이루서진다. 따라서 BOC 자기상관함수의 다중 첨두 문제는 동기화 오차의 주요한 원인이 된다. 최근 Julien에 의해 BOC 상관함수 상의 주변 첨두 크기를 줄일 수 있는 기법이 제안되었다. 그러나 이 기법은 주변 첨두를 완벽히 제거하지 못하며, 적용할 수 있는 신호도 제한적이다. 본 논문에서는 주변 첨두가 완벽히 제거된 새로운 상관함수를 제안하였다. 제안한 상관함수는 sine 위상 및 cosine 위상의 BOC 신호 모두에 적용할 수 있으며, 주변 첨두를 완벽히 제거할 수 있다. 또한 제안한 상관함수를 효율적으로 구현할 수 있는 상관기 구조도 제안하였다.

• 전자공학회논문지
• /
• 제49권10호
• /
• pp.148-158
• /
• 2012

본 논문에서는 센서용 incremental 델타-시그마 아날로그 디지털 변환기를 설계 하였다. 회로는 크게 pre-amplifier, S & H (sample and hold) 회로, MUX와 델타-시그마 모듈레이터, 그리고 데시메이션 필터로 구성 되어 있다. 델타-시그마 모듈레이터는 3차 1-bit 구조이고 $0.18{\mu}m$ CMOS 공정을 사용 하였다. 설계된 회로는 테스트 결과 5 kHz 신호 대역에서 signal-to-noise and distortion ratio (SNDR)는 87.8 dB의 성능을 가지고, differential nonlinearity (DNL)은 ${\pm}0.25$ LSB (16-bit 기준), integral nonlinearity (INL)은 ${\pm}0.2$ LSB 이다. 델타-시그마 모듈레이터 전체 소비 전력은 $941.6{\mu}W$ 이다. 최종 16-bits 출력을 얻기 위하여 리셋을 인가하는 N cycle을 200 으로 결정하였다.

• 대한전자공학회논문지
• /
• 제24권5호
• /
• pp.733-739
• /
• 1987

In this paper, variable threshold detection with weighted pulse code modulation-encoded signals transmitted over Gaussian channels has been investigated. Each bit in the \ulcornerlaw PCM word is weighted according to its significance in the transmitter. It the output falls into the erasure zone, the regenerated sample replaced by interpolation or prediction. To overall system signal to noise ratio for BPSK/PCM speech signals of this technique has been found. When the input signal level was -17 db, the gains in overall signal s/n compared to weighted PCM and variable threshold detection were 5 db and 3 db, respectively. Computer simulation was performed generating signals by computer. The simulation was in resonable agreement with our theoretical prediction.

• Bulletin of the Korean Chemical Society
• /
• 제24권7호
• /
• pp.971-974
• /
• 2003

By utilizing singular value decomposition (SVD) and shift averaged Harr wavelet transform (WT) with a set of Daubechies wavelet coefficients (1/2, -1/2), a method that can simultaneously eliminate an unwanted large solvent peak and noise peaks from NMR data has been developed. Noise elimination was accomplished by shift-averaging the time domain NMR data after a large solvent peak was suppressed by SVD. The algorithms took advantage of the WT, giving excellent results for the noise elimination in the Gaussian type NMR spectral lines of NMR data pretreated with SVD, providing superb results in the adjustment of phase and magnitude of the spectrum. SVD and shift averaged Haar wavelet methods were quantitatively evaluated in terms of threshold values and signal to noise (S/N) ratio values.

• 반도체디스플레이기술학회지
• /
• 제16권2호
• /
• pp.79-84
• /
• 2017

This paper outlines the Taguchi optimization methodology, which is applied to optimize cutting parameters in end milling when machining STS304 with TiAlN coated SKH59 tool under up and down end milling conditions. The end milling parameters evaluated are depth of cut, spindle speed and feed rate. An orthogonal array, signal-to-noise (S/N) ratio and analysis of variance (ANOVA) are employed to analyze the effect of these end milling parameters. The Taguchi design is an efficient and effective experimental method in which a response variable can be optimized, given various control and noise factors, using fewer resources than a factorial design. An orthogonal array of $L_9(33)$ was used. The most important input parameter for cutting force, however, is the feed rate, and depending on the cutter rotation direction. Finally, confirmation tests verified that the Taguchi design was successful in optimizing end milling parameters for cutting force.