• 융합신호처리학회논문지
• /
• 제10권1호
• /
• pp.32-39
• /
• 2009

동화상의 부호화 효율향상을 위하여 유전적 알고리즘(Genetic Algorithm: GA)을 이용하여 영역 분할하는 방법을 제안한다. 유전적 알고리즘은 함수치만을 이용하여 큰 탐색공간으로부터 최적의 조합을 축차적으로 찾아내는 방법이다. 이동추정과 영역분할을 동시에 진행함으로써, 이동 벡터를 화면내의 작은 블록이나 화소의 각각에 할당하고, 그것을 부호화 정보량과 신호 대 잡음비의 관계로부터 최적화 문제로 변환할 수 있다. 즉, 이동보상예측 부호화에는 영역분할과 이동 추정은 서로 밀접하게 관계되어 있다. 이것은 부호량과 S/N비를 최적화하는 것으로서 화면 속의 각 블록에서 이동 벡타를 최적의 상태로 배치하는 것이다. 그러므로, 본 논문에서는 최적인 영역분할 결과를 얻기 위하여 GA의 데이터형과 그 데이터의 처리 방법에 대해서 검토하였다. 또한, 테스트 화상을 이용한 컴퓨터시뮬레이션을 통하여 제안 방법의 유효성을 확인하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권8호
• /
• pp.387-393
• /
• 2001

This paper describes an advanced measuring method and precise evaluation of the ground resistance for the grounding system of energized substations and power equipments. A grounding system of substations consists of all interconnected grounding connections of grounded conductors, neutral ground wires, underground conductors of distribution lines, cable shields, grounding terminals of equipments, and etc. It is very difficult to measure the accurate ground resistance of the grounding terminals of equipments, and etc. It is very difficult to measure the accurate ground resistance of the grounding system of high voltage energized substations because of harmonic components caused by switched power supplies or overloads. The conventional fall-of-potential method may be subject to big error if stray ground currents and potentials are present. In this work, to improve the precision in measurements of the ground resistance by eliminating the effects of harmonic components and stray currents and potentials, the investigations of the ground resistance measurement by using a low pass filter in a model energized grounding system were conducted. The accuracy of ground resistance mesurements was evaluated as a function of the ratio of the test signal to noise (S/N). The errors due to the proposed ground resistance measurement method were decreased with increasing S/N and were less than 5[%] as S/N is 10. The proposed ground resistance measurement method appears to be considerably more accurate than the conventional fall-of -potential method. It is allows cancellation of the parasitic resistance of energized grounding systems, to employ the measurement method that allows cancellation of the parasitic effects due to other circulating ground currents and ground potential rises in practical situations.

• 천문학회보
• /
• 제41권2호
• /
• pp.43.3-43.3
• /
• 2016

We present a library of high-resolution (R~45,000) and high signal-to-noise ratio ($S/N{\geq}200$) near-infrared spectra of 147 standard stars. High quality spectra were obtained with Immersion GRating INfrared Spectrograph (IGRINS) covering the full range of H ($1.496-1.795{\mu}m$) and K ($2.080-2.460{\mu}m$) bands. The targets are mainly selected as MK standard stars which have well-defined spectral types and luminosity classes, and cover a wide range of effective temperatures and surface gravities. The spectra were corrected for telluric absorption lines and absolute flux calibrated using Two Micron All Sky Survey (2MASS) photometry. We find new spectral indices in H and K bands and provide their EWs. We describe empirical relations between the measured EWs and stellar atmosphere parameters such as effective temperature and surface gravity.

• 한국공작기계학회논문집
• /
• 제15권4호
• /
• pp.8-14
• /
• 2006

The important function of Ball-Stop part is to operate power shift using suitable pneumatic force for vehicle with more than 5 ton when a driver changes gear. In this paper, we have applied the concept of the DFSS(Design for Six Sigma) to robust design of Ball-Stop part. First, we have found the control factors which could mainly influence the performance of the Ball-Stop part. The simulations of contact between head and detent pin was performed to evaluate effect of control factors according to DOE(Design of experiment) by using $ADAMS^{(R)}$. Finally, we have obtained optimal levels of each factors using $MINITAB^{(R)}$. Through the comparison of the result of optimized design with one of inintial design, we have verified the usefulness of DFSS method which can be applied to robust design of mechanical systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권11호
• /
• pp.4050-4067
• /
• 2014

In wireless sensor networks, link scheduling is a fundamental problem related to throughput capacity and delay. For a given set of communication requests $L=\{l_1,l_2,{\cdots},l_n\}$, the MLS (maximum link scheduling) problem aims to find the largest possible subset S of Lsuch that the links in S can be scheduled simultaneously. Most of the existing results did not consider bidirectional transmission setting, which is more realistic in wireless sensor networks. In this paper, under physical interference model SINR (signal-to-noise-plus-interference-ratio) and bidirectional transmission model, we propose a constant factor approximation algorithm MLSA (Maximum Link Scheduling Algorithm) for MLS. It is proved that in the same topology setting the capacity under unidirectional transmission model is lager than that under bidirectional transmission model. However, compared with some work under unidirectional transmission model, the capacity of MLSA is improved about 28% to 45%.

• 비파괴검사학회지
• /
• 제26권2호
• /
• pp.99-107
• /
• 2006

자기적인 방법을 이용한 비파괴검사는 강자성체 표면 및 표면 근방의 균열을 탐상하는데 매우 유용하다. 균열을 평가하기 위해서는 시험편상의 누설자속분포를 정량적으로 취득해야 한다. 자기카메라는 큰 리프트오프에서 누설자속분포를 얻기 위하여 제안되었다. 자기카메라는 지원, 자기렌즈, AD 변환기, 인터페이스 및 컴퓨터로 구성되어 있다. 측정 대상체로부터 누설된 자속 또는 흐트러진 자장은 지기렌즈로 집속된 후, 배열된 작은 지기센서에 의하여 아날로그신호로 변환된다. 이러한 아날로그 신호는 AD 변환기에 의하여 디지털신호로 변환되고, 인터페이스 및 컴퓨터에 의하여 저장, 영상화 및 처리된다. 그러나, 지급까지의 자기카메라는 범용 AD변환기를 사용하기 때문에 변환 및 스위칭속도, 검출범위 및 분해능, 직접 메모리 액세스(DMA, direct memory access), 임시저장속도 및 저장량에 한계점을 가지고 있었다. 또한, S/N비를 높이기 위하여 OP-AMP의 도입, 신호의 증폭, 배선의 감소, LPF의 사용과 팥은 개선된 기술이 필요하다. 본 논문은 상술한 조건들을 만족하기 위하여 OP-AMP, LPF, 마이크로프로세서 및 DMA 회로를 포함한 자기카메라 전용 임베디드형 AD 변환기를 제안한다.

• Bulletin of the Korean Chemical Society
• /
• 제26권2호
• /
• pp.297-302
• /
• 2005

The determination of total phenols was accomplished by capillary-high performance liquid chromatography (capillary-HPLC) after nitrosation of the U.S.E.P.A. classified 11 priority pollutant phenols, using the nitrosated parent phenol (POHNO) as a reference for calibration. The optimum mobile phase composition for this analysis was found by examining the effect of changing the percentage of acetonitrile (MeCN) in the mobile phase on retention factors (k values) and peak intensities. As MeCN percentage was increased, k values were reduced and peak intensities were generally increased. From the results obtained, it was found that the optimum mobile phase was 90%(v/v) MeCN solution at pH 8.0, the detection wavelength of 400 nm, and a detection limit (D.L., concentration at signal to noise ratio (S/N) of 3.0) of 4.5 ${\times}$ $10^{-7}$ M. In addition, 10 of the 11 phenols present in mineral or waste water were separated after the nitrosation by capillary-HPLC. The optimum mobile phase for separation was a 40%(v/v) MeCN solution at pH 5.0.

• 한국진공학회지
• /
• 제20권5호
• /
• pp.367-373
• /
• 2011

동시 계수 도플러 넓어짐 양전자 소멸 분광법으로 p형과 n형 실리콘 시료에 0, 4.0 MeV 에너지의 1.0, $2.0{\times}10^{13}$ protons/$cm^2$ 양성자 빔 조사에 의한 결함을 측정하여 실리콘 구조 특성에 대하여 조사하였다. 양전자와 전자의 쌍소멸로 발생하는 감마선 스펙트럼의 수리적 해석 방법인 S-변수와 W-변수를 사용하여, 시료의 구조 변화를 측정하였다. 본 연구에서 측정된 S-변수는 시료에 조사된 양성자의 빔 에너지에 따라 변하지 않고 거의 일정한 값을 보인 반면, 양성자 조사량의 변화에 따라 결함이 증가하였으며, 그 이유는 양성자 조사 에너지에 따른 Bragg 피크 때문에 에너지는 시료의 특정 깊이에 주로 결함을 형성하여 시료전체에는 결함으로 잘 나타나지 않기 때문으로 판단된다. 그리고 빔의 조사량에 따른 결함의 영향이 큰 것으로 나타났다.

• 전자공학회논문지D
• /
• 제36D권6호
• /
• pp.28-34
• /
• 1999

본 논문에서는 GaN 박막 위에 각각 알루미늄(Al)과 백금(Pt)을 증착하여 저항성 전극 및 투명한 schottky 전극을 형성한 평면형 자외선 수광소자를 제작하였다. 제작된 소자에 대해 전기적 특성과 광학적 특성을 조사하여 자외선 센서로서의 적합성을 검토하였다. 사파이어 기판위에 성장된 GaN 박막은 $7.8{\times}10^{16}cm^{-3}$의 도핑(doping)농도와 $138 cm^2/V{\cdot}s$의 이동도(mobility)를 가졌으며, 파장이 365 nm 이하인 빛만을 흡수하는 자외선 감지막 특성을 나타내었다. 5 V의 역방향 전압을 인가하였을 때 제조된 schottky형 자외선 센서는 325 nm의 자외선 파장에서 응답도가 2.84 A/W였고, $4{\times}10^4$의 큰 신호대 잡음비(SNR)의 $3.5{\times}10^9$W의 잡음등가전력(NEP)을 나타내었다. 따라서 이들 결과로부터 GuN를 이용한 schottky 다이오드가 가시광 차단 UV photodetector를 제조할 수 있음을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제28권5호
• /
• pp.783-790
• /
• 2007

The immobilization of proteins and their molecular interactions on various polymer-modified glass substrates [i.e. 3-aminopropyltriethoxysilane (APTS), 3-glycidoxypropyltrimethoxysilane (GPTS), poly (ethylene glycol) diacrylate (PEG-DA), chitosan (CHI), glutaraldehyde (GA), 3-(trichlorosilyl)propyl methacrylate (TPM), 3'-mercaptopropyltrimethoxysilane (MPTMS), glycidyl methacrylate (GMA) and poly-l-lysine (PL).] for potential applications in a nanoarray protein chip at the single-molecule level was evaluated using prismtype dual-color total internal reflection fluorescence microscopy (dual-color TIRFM). A dual-color TIRF microscope, which contained two individual laser beams and a single high-sensitivity camera, was used for the rapid and simultaneous dual-color detection of the interactions and colocalization of different proteins labeled with different fluorescent dyes such as Alexa Fluor® 488, Qdot® 525 and Alexa Fluor® 633. Most of the polymer-modified glass substrates showed good stability and a relative high signal-to-noise (S/N) ratio over a 40-day period after making the substrates. The GPTS/CHI/GA-modified glass substrate showed a 13.5-56.3% higher relative S/N ratio than the other substrates. 1% Top-Block in 10 mM phosphate buffered saline (pH 7.4) showed a 99.2% increase in the blocking effect of non-specific adsorption. These results show that dual-color TIRFM is a powerful methodology for detecting proteins at the single-molecule level with potential applications in nanoarray chips or nano-biosensors.