• Journal of information and communication convergence engineering
• /
• 제6권4호
• /
• pp.439-443
• /
• 2008

It is shown that even if the modulating frequency of the light is too high for direct detection the signal can be extracted by frequency conversion at the same time as the detection by means of the nonlinearity of the APD. When this frequency conversion detection is applied to an optical receiver, the detection bandwidth can be increased while the configuration of the optical detection circuit and the signal processing in the subsequent stages are simplified. A fundamental analysis is carried out with an APD which is confirmed experimentally.

• 전자공학회논문지D
• /
• 제34D권11호
• /
• pp.1-8
• /
• 1997

In this paper, we propose a new method for the improvement of linearizing and adaptive convergence charateristics of the feedforward linear power amplifier. In this circuit, errors at the signal cancellation stage can be compensated at the error cancellation stage and the overall linearizaton and adaptation characteristics of the linear amplifier are improved. The broadband characteristics and linearizing capability are improved without increasing the complexity of circuits and the signal processing structure.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.328-331
• /
• 1998

Because of the powerful tolerance of overload, dynamic response and anti-erosion, Reluctive Pressure Transducer(RPT), as a measuring element of oil pressure equipment is applied to the measuring system of vessels, air craft. The Electrical reluctance appeared in the pressed diaphragm. To process the reluctance as a electric signal, bridge circuit is used. The design using the reluctance of pressure sensor is described in this paper. For the high efficiency of the sensitive RPT, pressure sensor structure is presented and electrical signal processing is simulated.

• 융합신호처리학회논문지
• /
• 제12권3호
• /
• pp.217-221
• /
• 2011

GaAs 나 InP 기반의 HEMT(High Electron Mobility Transistor)들은 우수한 마이크로파 및 밀리미터파 주파수 특성 및 이에 따른 우수한 저잡음 특성을 가지고 있다. GaAs 기반 MHEMT(Metamorphic HEMT)는 InP 기반의 HEMT에 비해 비용 측면에서 커다란 장점을 가지고 있다. 본 논문에서는 마이크로파 및 밀리미터파 응용 시스템에 필수적인 MHEMT의 RF 특성을 예측 평가하기 위하여 MHEMT의 RF 소신호 특성 회로를 시뮬레이션하고 분석하였다. 본 논문에서의 시뮬레이션을 통한 RF 소신호 주파수 분석은 MHEMT를 이용한 밀리미터파 응용 시스템 설계에 도움을 제공할 수 있을 것으로 기대된다.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2300-2307
• /
• 2008

This study receives the noise transmitted in a constant audio frequency range through a microphone array in which the noise(like grease in a pan) occurs on the power supply line due to the troublesome partial discharge(arc). Then by going through a series of signal processing of removing noise, this study measures the distance and direction up to the noise caused by the troublesome partial discharge(arc) and monitors the result by displaying in the analog and digital method. After these, it determines the state of each size and judges the distance and direction of problematic part. When the signal sound transmitted by the signal source of bad insulator is received on each microphone, the signal comes only in the frequency range of 20 kHz by passing through the circuit of amplification and 6th low pass filter. Then, this signal is entered in a digital value of digital signal processing(TMS320F2812) through the 16-bit A/D conversion. By doing so, the sound distance, direction and coordinate of bad insulator can be detected by realizing the correlation method of detecting the arriving time difference occurring on each microphone and the algorithm of detecting maximum time difference.

• 대한전자공학회논문지SD
• /
• 제48권11호
• /
• pp.41-47
• /
• 2011

산업용 표준 센서 신호처리를 위해 다양한 입력신호를 5V 전압 출력으로 변환하는 새로운 디지털 계측 증폭기(DIA)를 설계하였다. 이 계측 증폭기는 상용의 계측증폭기, 7개의 아날로그 스위치, 2개의 1.0V와 -10.0V의 기준전압, 그리고 4개의 저항기로 구성된다. 신호 변환원리는 입력신호에 따라 저항기와 기준전압을 디지털적으로 선택하여 5V의 출력전압을 얻도록 회로 구성을 바꾸는 것이다. 시뮬레이션 결과 DIA는 0V~5V, 1V~5V, -10V~+10V, 그리고 4mA~20mA의 입력신호에 대하여 우수한 0~5V 출력전압 특성을 얻을 수 있다는 것을 확인하였다. 4가지 입력 신호에 대하여 비선형오차는 0.1%이하이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.828-831
• /
• 1996

Radiation monitoring system is needed at nuclear power plant and nuclear facility. Manual survey techniques are commonly used, but they are time consuming and somewhat inaccurate. Automatic radiation surveys are very important because it provides significant savings in men-rem and wages. Unmanned, remote automatic radiation measurement system should be small and light-weighted in order to mount on robotic system. The system we have developed consists of detection parts, signal processing part, interface, and software part. Position information is provided by using of a collimator. The measurement process is achieved by the scanning of detector and image processing techniques are used to display radiation levels. We designed collimators, detectors, signal processing circuit, and constructed prototype system. The goal of this system is the mapping of camera image and radiation level distribution.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1423-1426
• /
• 2005

Map building is the most important thing for the mobile robots navigation. It requires specific vision system such as CCD camera, range finding system, and many other things. Laser range finder has highly collimated beams can be obtained easily, thus achieving lateral resolution. Laser Diode is used for a continuous laser source. The Automatic Current Control Circuit and the Bias-T is used for mix AC signal with DC bias. This signal is used for driving Laser Diode. The main idea of the calculating distance is detecting phase shift between reference signal and detected signal by photo detector. For the signal processing, the Lock-in amplifier system is addressed in this paper. We used a diffused reflected beam to detect phase shift in this system. But this beam is minuteness signal so it can be easily buried in nose. Lock-in amplifier is used to measure the amplitude and phase of signals which are buried in noise.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.289-289
• /
• 2010

Translation Characteristics of Digital Decoder utilizing the analog parallel processing circuit technology is designed. The fast parallel viterbi decoder system acted by a replacement of the conventional digital viterbi Decoder has good propagation. we are applied proposed analog viterbi decoder to decode PR signal for DVD and analyze the specific circuit and signal characteristics.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권2호
• /
• pp.175-183
• /
• 2014

In this paper, we present the design and implementation of real-time sound localization based on $0.13{\mu}m$ CMOS process. Time delay of arrival (TDOA) estimation was used to obtain the direction of the sound signal. The sound localization chip consists of four modules: data buffering, short-term energy calculation, cross correlation, and azimuth calculation. Our chip achieved real-time processing speed with full range ($360^{\circ}$) using three microphones. Additionally, we developed a dedicated sound localization circuit (DSLC) system for measuring the accuracy of the sound localization chip. The DSLC system revealed that our chip gave reasonably accurate results in an experiment that was carried out in a noisy and reverberant environment. In addition, the performance of our chip was compared with those of other chip designs.