• Journal of Astronomy and Space Sciences
• /
• v.27 no.1
• /
• pp.21-30
• /
• 2010

In processing space geodetic data, mapping functions are used to convert the tropospheric signal delay along the zenith direction to the line of sight direction. In this study, we compared three mapping functions by evaluating their effects on the tropospheric signal delay and position estimates in GPS data processing. The three mapping functions tested are Niell Mapping Function (NMF), Vienna Mapping Function 1 (VMF1), and Global Mapping Function (GMF). The tropospheric delay and height estimates from VMF1 and GMF are compared with the ones obtained with NMF. The differences among mapping functions show annual signals with the maximum occurring in February or August. To quantitatively estimate the discrepancies among mapping functions, we calculated the maximum difference and the amplitude using a curve fitting technique. Both the maximum difference and amplitude have high correlations with the latitude of the site. Also, the smallest difference was found around $30^{\circ}N$ and the amplitudes increase toward higher latitudes. In the height estimates, the choice of mapping function did not significantly affect the vertical velocity estimate, and the precision of height estimates was improved at most of the sites when VMF1 or GMF was used instead of NMF.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.58-63
• /
• 2002

One of the important problems of OFDM system is the large PAPR of the output signal, which can result the significant signal distortion in presence of nonlinear amplifiers. To reduce the PAPR, we use fundamentally the level clipping and propose the modified mapping/demapping method for effective reducing the PAPR of the OFDM signals with level clipping. We can significantly improve the BER performance characteristics for the OFDM system. We discussed, through extensive computer simulations, the effects of level clipping and modified mapping/demapping method on the performance of OFDM system including the trade off between bandwidth expansion and BER performance and between bandwidth efficiency and BER performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1340-1348
• /
• 2004

In this paper, we propose a PAPR-minimized sequence mapping scheme that achieves the minimum Peak-to-Average Power Ratio (PAPR) and the minimum amount of computations for the OFDM system. To reduce the PAPR, the mapping table is created with information about block index and symbol patterns of the lower signal power. When the input data sequence comes, it performed division by the block length to find the quotient and remainder. The symbol pattern of the lower signal power can be found in terms of the block index as the quotient in the mapping table and transmitted with remainder as the side information to distinguish and recover the original data sequence in the receiver. The two methods with the proposed mapping scheme are proposed in this paper. One is with mapping table to recover the O%M signal in both transmitter and receiver. The other is with mapping table only in transmitter to reduce the load and the complexity in the mobile system. We show that this algorithm provides the PAPR reduction, the simple processing and less computational complexity to be implemented for the multi-carrier system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.6
• /
• pp.1005-1013
• /
• 2015

In this paper, an uplink pilot signal structure is proposed for millimeter wave(mmWave)-based mobile wireless backhaul. For the transmit diversity of two antenna ports, uplink pilot signals generated from the Zadoff-Chu sequence can be mapped in an interleaved mode or continuous mode on the frequency axis, and channel estimation algorithms are different depending on the pilot signal mapping schemes. Through a simulation under Rayleigh fading channel assuming a subway scenario, the interleaved mapping scheme showed no performance degradation compared to the continuous mapping scheme and the implementation complexity of the uplink channel estimator was reduced due to the interleaved mapping scheme.

• Korean Journal of Medicinal Crop Science
• /
• v.12 no.6
• /
• pp.515-518
• /
• 2004

Anemarrhena asphodeloides, a medicinal plant, has chromosome number of 2n=2x=22. To characterize the somatic metaphase chromosomes, physical mapping of 45S and 5S rDNAs using McFISH (multi-color fluorescence in situ hybridization) was applied. Two pairs of 45S rDNA loci were detected on the terminal regions of the short arm of chromosomes 1 and 3. A pair of 5S rDNA signal was observed on the short arm of chromosome 3. 5S rDNA site seemed to be the same locus as one of the 45S rDNA site. McFISH was very useful tool for the localization and identification of rDNAs on the metaphase chromosomes in A. asphodeloides.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1983-1984
• /
• 2008

뇌 활동의 전기적 신호인 뇌파(EEG)와 외부 자극에 대한 유발 전위(EP)를 측정하여 실시간으로 뇌지형도를 생성하는 real-time brain mapping system을 개발하였다. 측정 전극은 32채널을 사용하였고, EEG를 실시간 및 누적 주파수 분석을 통한 뇌파의 활성도 진단, EP를 측정하여 시각적/청각적 자극에 의한 유발 전위 분석을 할 수 있다. 본 시스템은 측정 대상군의 통계적 분석을 위한 Database를 구축하였고, 신뢰성 높은 뇌파 및 유발 전위 신호를 위하여 실시간 측정과정 및 측정 후 Data 검토과정에서 다양한 Artifact 제거 알고리즘이 도입되었다. 또한, 32 채널 Brain map을 구성하여 뇌파를 공간적으로 분석 가능하며, 시간 및 주파수의 증가에 따라 Brain map을 동영상화하여 시간적/주파수적 변화에 따른 분석이 가능하다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.4
• /
• pp.118-127
• /
• 1998

In this paper, we propose a voice personality transformation method which makes one person's voice sound like another person's voice. In order to transform the voice personality, vocal tract transfer function is used as a transformation parameter. Comparing with previous methods, the proposed method can obtain high-quality transformed speech with low computational complexity. Conversion between the vocal tract transfer functions is implemented by a linear mapping based on soft clustering. In this process, mean LPC cepstrum coefficients and mean removed LPC cepstrum modeled by the low dimensional vector are used as transformation parameters. To evaluate the performance of the proposed method, mapping rules are generated from 61 Korean words uttered by two male and one female speakers. These rules are then applied to 9 sentences uttered by the same persons, and objective evaluation and subjective listening tests for the transformed speech are performed.

• Progress in Medical Physics
• /
• v.32 no.4
• /
• pp.153-158
• /
• 2021

Purpose: This study evaluated the features of a pressure mapping system for patient motion monitoring in radiation therapy. Methods: The pressure mapping system includes an MS 9802 force sensing resistor (FSR) sensor with 2,304 force sensing nodes using 48 columns and 48 rows, controller, and control PC (personal computer). Radiation beam attenuation caused by pressure mapping sensor and signal perturbation by 6 and 10 mega voltage (MV) photon beam was evaluated. The maximum relative pressure value (mRPV), average relative pressure value (aRPV), the center of pressure (COP), and area of pressure distribution were obtained with/without radiation using the upper body of an anthropomorphic phantom for 30 minutes with 15 MV. Results: It was confirmed that the differences in attenuation induced by the FSR sensor for 6 and 10 MV photon beams were small. The differences in mRPV, aRPV, area of pressure distribution with/without radiation are about 0.6%, 1.2%, and 0.5%, respectively. The COP values with/without radiation were also similar. Conclusions: The characteristics of a pressure mapping system during radiation treatment were evaluated on the basis of attenuation and signal perturbation using radiation. The pressure distribution measured using the FSR sensor with little attenuation and signal perturbation by the MV photon beam would be helpful for patient motion monitoring.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.12
• /
• pp.97-102
• /
• 2011

We propose a novel displacement measurement method in the LVDT (Linear Variable Differential Transformer) structure. This proposed algorithm is independent of coil pattern, which may be implemented to PCB, or transformer component, because it is based on the signal-mapping method. we have manufactured several boards which have different coil patterns and our algorithm is ported into TMS320F2812 of TI DSP chipset. The output signal has high accuracy and high stability although PCB coil pattern are coarse.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.11
• /
• pp.11-18
• /
• 2007

FFT(Fast Fourier Transform) processor is one of the key components in the implementation of OFDM systems such as WiBro, DAB and UWB systems. Most of the researches on the implementation of FFT processors have focused on reducing the complexities of multipliers, memory and control circuits. In this paper, to reduce the memory size required for IFFT(Inverse Fast Fourier Transform), we propose a new IFFT design method based on a mapping method. By simulations, it is shown that the reposed IFFT design method achieves more than 60% area reduction and much SQNR(Signal-to-Quantization-Noise Ratio) gain compared with previous IFFT circuits.