• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1234-1238
• /
• 2005

As the low power GPS signal is susceptible to interference, interference can seriously degrade the performance of GPS receiver. This paper designs a ANIEF(Adaptive Narrowband Interference Excision in Frequency domain) filter that removes narrow band interferences with low signal loss. This filter uses the pre-correlation technique and attempts to filter out the interference in the frequency domain. The interference excision performance of the designed filter is evaluated for various interferences using the ANIEF filter inserted GPS software receiver and the interference generator. Interferences considered in this paper are single-tone CWI(Continuous Wave Interference), multi-tones CWI, pulsed CWI, and swept CWI. The narrowband interference excision filter in frequency domain is very effective against various interferences and the strong interference with a simple structure. However, the signal power loss is unavoidable while transforming. In this paper, the hamming window and overlap technique are adopted to reduce the signal power loss. Finally, the interference excision performance and the reduced signal power loss of the ANIEF filter are shown.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.107-112
• /
• 2006

The previous acquisition method of GPS receiver for reference station adopts not only the coherent integration method but also the non-coherent integration method in order to enhance sensitivity under noisy environment. However, under noisy environment, the previous GPS signal acquisition method causes the non-coherent integration loss which is a major factor among losses that can be caused during GPS signal acquisition. The non-coherent integration loss also increases with the strength of the received noise. This paper has intention of analyzing the performance of the GPS signal acquisition method proposed to effectively enhance sensitivity of DGPS reference receiver under noisy environment. This paper presents that the proposed GPS signal acquisition method suppresses the non-coherent integration loss through post-processing simulation. Furthermore, with regard to the mean acquisition time, it is shown that the number of search cells of the proposed GPS signal acquisition method is much fewer than that of the previous GPS signal acquisition method.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1791-1801
• /
• 2016

This paper considers a carrier based signal injection method for use in the three shunt sensing inverter (TSSI) for sensorless motor control. It also analyzes the loss according to the injection axis of the voltage signal. To remove both the phase current and rotor position sensors, a sensorless method and a phase current reconstruction method can be simultaneously considered. However, an interaction between the two methods can be incurred when both methods inject voltage signals simultaneously. In this paper, a signal injection based sensorless method with the 120° OFF Discontinuous PWM (DPWM) is implemented in a TSSI to avoid this interaction problem. Since one leg does not have a switching event for one sampling period in the 120° OFF DPWM, the switching loss is altered according to the injection axis. The switching loss in the d-axis injection case can be up to 32% larger than that in the q-axis injection case. Other losses according to the injection axis are also analyzed.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.97-103
• /
• 2015

This paper investigates the effect of absorption loss by a human body to the received signal strength with respect to on-body transmitting antenna positions in on-to-off wireless body area networks. This investigation is based on measurement results obtained from experiments performed on human bodies (male and female) using planar inverted-F antennas in an anechoic chamber. The total absorption loss by the human body is also presented through the SEMCAD-X simulations. Our investigation showed that the received signal strength becomes lower when the transmitting antenna is mounted at a specific position where more absorption loss is experienced. The statistical analyses of on-to-off body channel characteristics based on the measurement results are presented.

• 제어로봇시스템학회논문지
• /
• 제10권1호
• /
• pp.96-102
• /
• 2004

For sensitivity enhancement, the general assisted-GPS acquisition method adopts not only the coherent accumulation technique but also the non-coherent accumulation technique since the long coherent accumulation period increases the number of frequency search cells. But the non-coherent accumulation technique causes tile squaring loss, which is a dominant factor among the acquisition losses of assisted GPS dealing with weak GPS signals. This paper derives the squaring loss of the previous assisted-GPS acquisition method and proposes an assisted-GPS acquisition method for solving the problem of squaring loss in weak signal environment. In this paper, it is explained that the proposed assisted-GPS acquisition method prevents the squaring loss using a coupled coherent accumulation technique and the number of search cells of the proposed assisted-GPS acquisition method is much smaller than that of the previous assisted-GPS acquisition method. Finally, through the simulation by the GPS simulator, the acquisition success rate of the proposed assisted-GPS acquisition method is compared with that of the previous assisted-GPS acquisition method and the acquisition improvements are shown in weak signal environment.

• 한국정보통신학회논문지
• /
• 제9권5호
• /
• pp.920-926
• /
• 2005

본 논문에서는 고층 건물내의 층간 셀구성에 있어서 기존의 층간 셀간섭 분석에서 고려되지 않았던 건물 매질에 의한 영향을 분석하고 각 주파수대역에서의 매질에 따른 손실치를 측정실험을 통하여 추출하였다. 특히, 매질에 따른 투과손실 측정시 직접파 경로로 유입되는 간섭신호와 기울기(slant)를 갖는 경로로 유입되는 간섭신호에 관하여 측정함으로써 층간 셀구성에 있어서 기준셀로 유입되는 간섭신호의 경로에 따른 시스템 성능을 분석하였다.

• 반도체디스플레이기술학회지
• /
• 제22권1호
• /
• pp.94-98
• /
• 2023

In the case of high-speed data transmission on high multilayer boards, signal coherence is a problem, especially due to the via hole, and a solution to improve return loss or insertion loss by applying a back drill to the via hole is being proposed. In this paper, Near-Field Electromagnetic measurements were made on a high multilayer board to determine how the presence or absence of back drill affects signal consistency. For this purpose, we used a signal generator, spectrum analyzer, and EMC scanner on a test board to determine if it is possible to distinguish between areas with and without back drill in the via holes of the stubs on the board. Also, we analyzed the measured value of S11, S21 and EMC etc. for how much it improves the signal attenuation of the stub with back drill. Through this, we knew that less electromagnetic waves are generated the stub via with back drill. At future research, we will analyze how much it improves the signal loss and electromagnetic waves due to the depth of back drill.

• 한국통신학회논문지
• /
• 제40권7호
• /
• pp.1450-1456
• /
• 2015

송신 안테나는 약 53m 높이에 설치하고, 수신 안테나는 약 6m 높이에 설치하였으며, 해안국에서 700m부터 약 20km까지의 전파 경로 구간에서 $5{\pm}1m/s$의 속도로 이동하면서 150.0625MHz의 단일 주파수를 사용하여 수신신호의 크기를 측정하는 시험을 수행하였다. 본 논문에서는 실해역 측정 데이터를 입력으로 하여 최소자승법오차 방법을 이용하여 측정한 전달경로 구간에서 경로감쇠지수가 3.79가 됨을 추정하였으며, 추정한 경로감쇠지수는 해상 VHF 채널(100MHz)에 대해 ITU-R P.1546-4 Annex 2의 측정 결과와 유사한 결과를 보인다. 추정한 경로감쇠 지수값은 우리나라 남해안의 해상통신에서 하절기의 경로감쇠 지수 예측값으로 사용할 수 있을 것이다.

• 한국군사과학기술학회지
• /
• 제2권1호
• /
• pp.30-37
• /
• 1999

흙으로 침투하는 전파의 투과도와 흙에 의한 신호감쇄량을 계산하였다 대상 복합매질을 이층구조로 모델링한 후, 적분형태로 주어진 전계 표현식을 보였다. 불균일 복합매질에서는 체적산란이 일어나며, 이의 영향이 감안된 전파특성을 분석하기 위하여 반복법인 본(Born) 근사법을 사용하였다. 또한 불균일 복합매질이 가진 랜덤성의 정도는 분산과 상관길이에 의해 정해지도록 하였다. 흙에 함유된 수분량, 흙 입자의 반경, 온도 및 주파수를 변수로 하는 투과도 및 신호감쇄량 식을 제안하였다. 제안된 식으로부터 이들 변수에 따른 투과도 및 신호감쇄량의 변화를 보였다. 분석 결과, 수분이 함유된 경우에는 신호감쇄량의 변동폭이 온도에 따라서 크게 달라짐을 보게 되었고, 그 변동치는 일반적인 예상치를 훨씬 초과하였으며 그 물리적 이유를 설명하였다.

• 한국광학회지
• /
• 제12권2호
• /
• pp.77-82
• /
• 2001

손실 200 ppm급과 30 ppm급인 두 종류의 시험 반사경을 대상으로, 지수감쇠 방법을 이용한 반사경 손실측정 시스템의 오차 특성이 조사되었다. 공진기 길이 떨림에 의한 공진기 감쇠신호의 지수함수 왜곡을 보상하기 위하여 감쇠신호 데이터 평균기법을 적용하였다. 감쇠신호 6개의 평균이 취해졌을 때 감쇠신호의 지수함수 곡선맞춤 오차개선이 뚜력시 관측되었으며 손실 200ppm급 시험 반사경의 경우 약 2.4배 손실 30ppm급 시험 반사경의 경우 약 1.3배의 반사경 손실 측정오차 개선효과를 얻을 수 있었다 시험 공진기에서의 일별(day-to-day) 반사경 손실측정 반복도 오차가 조사되었다. 손실 200ppm급 시험 반사경의 경우 약 5.0%, 30ppm급 시험 반사경의 경우 약 26.4%의 손실측정 반복도 오차가 관측되었다. 저손실 반사경 평가에서 확인된 낮은 감쇠신호 데이터 평균효과와 높은 손실측정 반복도 오차는 손실측정 시스템 자체의 측정오차 이외에 시험 반사경 표면의 불균일한 손실 공간분포와 주변 오염원 유입의 결과로 분석되었다 또한 공진기 길이 떨림의 크기와 공진기 길이 측정오차가 손실측정 시스템의 정확도에 미치는 영향을 계산을 통해 조사한 결과, 분해능 수 ppm 급 현재의 측정 시스템의 성능에 미칠수 있는 공진기 길이오차의 영향은 충분히 적은 것으로 확인되었다.