• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.149-153
• /
• 1999

As VLSI technology advances rapidly, the operating frequency of digital systems becomes very fast. In such a high-speed system, there are many factors that threaten signal integrity. The noise sources in digital system include the noises in power supply, ground bounce and packaging media and distortions on single and multiple transmission lines. This paper will present a technology survey useful in the design of Gigabit interconnection systems. Some case studies have been constructed which show the lossy transmission line effect of skin effect. dielectric loss, with backplane connectors using the theoretical and practical conditions.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1436-1437
• /
• 2008

In this work, we investigate the electrical and electromagnetic behaviors of the power-bus with a variety of shapes of aperture, on the signal integrity, using a rigorous methods(Modal or MoM) along with Modal analysis method.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.280-287
• /
• 2006

Advent of the new European satellite positioning system, Galileo will result in development of new satellite receivers such as, GPS/Galileo dual mode receiver. Furthermore, a new GNSS satellite receiver would be required to be self-reconfigured to certain navigational environments like, indoor, high interference, integrity, etc. In this paper, design and implementation issue of a FPGA based flexible GNSS receiver which gets navigation solution using L1 band signals of GPS and Galileo simultaneously is addressed.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.04b
• /
• pp.1209-1212
• /
• 2001

본 논문에서는 PCB(Printed Circuit Board)회로에서 고속 신호들을 전달하는 배선의 특성 및 배선의 요구사항에 의한 설계 규칙과 이론화된 공식은 이용하여 PCB상에 배치되는 부품들간의 배선경로를 추적하여 해당 배선의 특성을 분석하고, 흐르는 신호의 특성 및 해당 신호의 전기/전자적인 시뮬레이션을 수행할 수 있도록 하는 PCB회로의 신호통합 시뮬레이터에 대하여 언급하고 실험을 통하여 시뮬레이션의 타당성을 검증하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.116-124
• /
• 2003

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.993-996
• /
• 2007

Depending on applications where transmission bandwidth, wire distance, power consumption and EMI environments vary, design trade-offs must be made to optimize the display interface. After introducing the digital display interface architecture, topics such as cost, EMI, signal integrity, scalability and content protection are discussed with available techniques. Implementation issues are discussed regarding their cost and design complexity. Existing standards are reviewed and comparison on their strengths and shortcomings are discussed.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.11a
• /
• pp.131-134
• /
• 2000

본 논문에서는 디지털 IC회로의 입출력과 입출력 버퍼에 대한 입출력 버퍼정보 형식 모델링을 묘사하였고 입출력 버퍼의 전기적 특성을 표현하는 방법 등을 나타냈다. 또한 본 논문에서 도출한 입출력 버퍼 모델링은 CMOS와 TTL IC를 모델링 하는데 사용할 수 있는데 CMOS와 TTL IC 그리고 ROM과 RAM 메모리에 대한 입출력 버퍼 모델을 128개 정도 만들었다. 이러한 입출력 버퍼 모델은 정확한 행동(behavioral) 모델을 구성하기 위해 그리고 고속 회로의 PCB 디자인 시뮬레이션에 사용될 것이다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.485-492
• /
• 2009

The thermal fatigue crack(TFC) is one of the life-limiting mechanisms at the nuclear power plant operating conditions. In order to evaluate the structural integrity, various non-destructive test methods such as radiographic test, ultrasonic test and eddy current are used in the industrial field. However, these methods have restrictions that defect detection is possible after the crack growth. For this reason, acoustic emission testing(AET) is becoming one of powerful inspection methods, because AET has an advantage that possible to monitor the structure continuously. Generally, every mechanism that affects the integrity of the structure or equipment is a source of acoustic emission signal. Therefore the noise filtering is one of the major works to the almost AET researchers. In this study, acoustic emission signal was collected from the pipes which were in the successive thermal fatigue cycles. The data were filtered based on the results from previous experiments. Through the data analysis, the signal characteristics to distinguish the effective signal from the noises for the TFC were proven as the waveform difference. The experiment results provide preliminary information for the acoustic emission technique to the continuous monitoring of the structure failure detection.

• Journal of Navigation and Port Research
• /
• v.45 no.1
• /
• pp.26-32
• /
• 2021

In ocean field, the spread of the Fourth Industrial Revolution based on information and communication technology requires high precision and stable PNT&D (Position, Navigation, Timing and Data). As the IMO (International Maritime Organization) and IALA (The International Association of Marine Aids to Navigation and Lighthouse Authorities) are requiring backup systems due to mitigate vulnerabilities and the increase of dependency on GNSS (Global Navigation Satellite System), Korea is conducting a research & development of R-Mode. An DGPS (Differentiate Global Positioning System) reference station that uses MF, an existing maritime infrastructure, and AIS (Automatic Identification System) base stations that use 34 integrity station and VHF will be utilized in this study to avoid redundant investment. Because there are radio shadow areas that display low signal levels in the west sea, the establishment of new R-Mode reference and integrity station will be intended to resolve problems regrading the radio shadow area. Because the frequency has a characteristic in that radio wave transmits well along the ground (water surface) in low frequency band, simulation and measurement were conducted therefore this paper to propose candidate sites for R-Mode reference and integrity station resulted through p wave's propagation characteristics analysis. Using this paper, R-Mode reference and integrity station can be established at appropriate locations to resolve radio shadow areas in other regions.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.150-152
• /
• 2014

디지털 평판 LCD TV의 영상신호 전송에 LVDS가 사용되어 왔으나 케이블간의 타이밍 문제가 대두되고 초고해상도의 컬러 Depth 확장으로 인해 보다 빠른 전송속도가 요구되어진다. V-by-One HS는 초고해상도 영상처리 IC 및 TCON 간의 새로운 인터페이스 기술로서 최대 3840*2160@240Hz의 해상도 영상구현이 가능하다. 동작 주파수 대역의 공진모드 전압 분포와 V-by-One HS IBIS(Input/Output Buffer Information Specification) 모델 시뮬레이션을 통하여 PCB 설계 방법을 제안한다. 본 논문에서는 V-by-One HS 인터페이스 기술을 사용하여 초고해상도 영상패턴 제어 신호발생기의 시스템 구성을 제안하고 고속영상 신호에 대한 신호 무결성을 검증하고자 한다.