• 전기학회논문지P
• /
• 제62권3호
• /
• pp.151-158
• /
• 2013

Large generator of power plant is very important. In order to protect large generator from faults, digital protective relay or IED is required. However, all protective relays for generators of the domestic power plant are operated by foreign products. And now, for technological independence from foreign and improvement of import substitution effect, IEDs using domestic technology are being developed. To evaluate performance of developing next-generation power devices, the study of the dynamic characteristics of the power plant, generator system modeling, fault simulation and analysis, should be considered. Specially, To obtain IEEE Standards COMTRADE format for relay operation test, generator system modeling and fault simulation using PSCAD/EMTDC tools must be preceded. Until now, a complete modeling of generator internal windings and fault simulation techniques dose not exist. In this paper, for evaluation performance of relay elements of developing IED, the generator system modeling and various faults simulation using PSCAD/EMTDC tools were performed. And then, the various transient phenomena through obtained relaying signal of developed modeling were analyzed.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.107-112
• /
• 2005

This paper deals with a fault detection system design for uncertain nonlinear systems modelled as T-S fuzzy systems with the integral quadratic constraints. In order to generate a residual signal, we used a left coprime factorization of the T-S fuzzy system. From the filtered signal of the residual generator, the fault occurence can be detected effectively. A simulation study with nuclear steam generator level control system shows that the suggested method can be applied to detect the fault in actual applications.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.339-342
• /
• 2005

In order to support ultrawide-band signal generation for low rate WPAN, several types of signal generation mechanisms are suggested such as Chaos, Impluse, and Chirp signals by the activity of IEEE 802.15.4a. The communication system applied chaos theory may have ultrawide-band characteristics with spread spectrum and immunity from multipath effect. In order to use the advantage of chaotic signal generation, we introduce the system implementation of communication and networking systems with the chaos UWB signal. This system may be composed of mainly three parts in hardware architecture : RF transmission with chaotic signal generation, signal receiver using amplifiers and filters, and 8051 & FPGA unit. The most difficult part is to implement the chaotic signal generator and build transceiver with it. The implementation of the system is devidced into two parts i.e. RF blocks and digital blocks with amplifiers, filters, ADC, 8051 processor, and FPGA. In this paper, we introduce the system block diagram for chaotic communications. Mainly the RF block is important for the system to have good performance based on the chaotic signal generator. And the main control board functions for controlling RF blocks, processing Tx and Rx data, and networking in MAC layer.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권4호
• /
• pp.153-164
• /
• 2019

This paper presents the development of an end-to-end numerical simulator for signal design of the next generation global navigation satellite system (GNSS). The GNSS services are an essential element of modern human life, becoming a core part of national infra-structure. Several countries are developing or modernizing their own positioning and timing system as their demand, and South Korea is also planning to develop a Korean Positioning System (KPS) based on its own technology, with the aim of operation in 2034. The developed simulator consists of three main units such as a signal generator, a channel unit, and a receiver. The signal generator is constructed based on the actual navigation satellite payload model. For channels, a simple Gaussian channel and land mobile satellite (LMS) multipath channel environments are implemented. A software receiver approach based on a commercial GNSS receiver model is employed. Through the simulator proposed in this paper, it is possible to simulate the entire transceiver chain process from signal generation to receiver processing including channel effect. Finally, numerical simulation results for a simple example scenario is analyzed. The use of the numerical signal simulator in this paper will be ideally suited to design a new navigation signal for the upcoming KPS by reducing the research and development efforts, tremendously.

• 한국전자파학회논문지
• /
• 제12권7호
• /
• pp.1086-1093
• /
• 2001

본 논문에서는 n차 오차신호발생기(error signal generator)를 이용한 postdistortion 방식의 RF 전력증폭기의 선형화 기법을 제안하였다. n차 ESG(error signal generator)는 전력증폭기의 기저대역 등가 복소 전달함수를 바탕으로 오차신호를 발생시켜, 이를 전력증폭기의 출력 단에서 n차 이하의 비선형성만을 제거한다. 따라서, 출력 단의 n차 이상의 혼변조 왜곡(intermodulation distortion) 성분에 영향을 미치지 않으며, 개루프(open-loop) 형태이므로 시스템의 안정성을 보장할 수 있다. 또한, 전력증폭기의 입력 신호를 이용하여 오차신호를 발생시키므로 feedforward 방식에서와 같이 오차신호 발생에 따른 주신호 경로(main signal path)의 시간지연 회로가 불필요하다. 실험 결과로 7차 ESG를 이용한 postdistorter를 최대 출력이 5 W인 셀룰러 대역 A급 증폭기에 적용한 경우의 혼변조 왜곡 개선도와 3-carrier CDMA 신호를 이용한 측정 결과를 제시하여 본 방법의 타당성을 검증하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.547-550
• /
• 2009

본 논문에서는 선박용 비상 디젤 엔진 발전기 제어 및 모니터링을 위해 제안된 디지털 기반의 입/출력 인터페이스 회로를 소개한다. 선박용 비상 발전기의 동작 상태를 모니터링 하고 제어하기 위해 제어 및 감시 회로는 5개의 아날로그 입력 채널과 2개의 픽업(Pick-up) 코일 계측 회로, 브로컨 와이어(Broken Wire) 감지 기능을 가지는 10개의 디지털 입력 채널 및 7개의 릴레이 제어 신호 출력 채널이 요구된다. 본 연구에서는 아날로그 입력 단에 간단한 필터 회로와 포토커플러, 비교기 회로를 이용하여 입력신호에 대한 신호처리를 수행하였으며, 중요한 릴레이 출력 신호들은 이중으로 단속될 수 있도록 설계하여 오동작을 철저히 방지하였다. 그리고 픽업코일 신호를 디지털 처리하는 회로를 적용하여 속도 신호 입력의 정확성을 향상 시켰다.

• Journal of Biosystems Engineering
• /
• 제24권3호
• /
• pp.253-258
• /
• 1999

This study was conducted to develop an automatic egg inspection system for detecting creaked eggs based on acoustic impulse response. This system includes a sound generator, a sound sensor with signal conditioner, and a computer. The sound generator that hit the sharp of the dull edges of an egg was constructed with a ceramic ball pendulum attached to a rotary type solenoid. The signal conditioner included a pre-amplifier and a digital signal processing (DSP) board. The parameters for distinguishing cracked and normal eggs were the area, the geometric centroid and the resonance frequency of power spectrum of the acoustic signal generated. An algorithm for on-line detection of the continuous transferring eggs was developed. The performance tests resulted with 91% success rate to separate cracked and normal eggs at the rate of 1 second per an egg.

• Journal of electromagnetic engineering and science
• /
• 제17권1호
• /
• pp.39-43
• /
• 2017

In this paper, a systematic and statistical calibration technique was implemented to calibrate a high-speed signal converting system containing multiple digital-to-analog converters (DACs). The systematic error (especially the imbalance between DACs) in the current combining network of the multi-DAC system was modeled and corrected by calculating the path coefficients for individual DACs with wideband reference signals. Furthermore, by applying a Kalman filter to suppress noise from quantization and clock jitter, accurate coefficients with minimum noise were identified. For correcting an arbitrary waveform generator with two DACs, a co-simulation platform was implemented to estimate the system degradation and its corrected performance. Simulation results showed that after correction with 4.8 Gbps QAM signal, the signal-to-noise-ratio improved by approximately 4.5 dB and the error-vector-magnitude improved from 4.1% to 1.12% over 0.96 GHz bandwidth.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.865-868
• /
• 1993

This paper describes a simple random signal generator employing by CMOS analog technology in current mode. The system is a nonlinear dynamical system described by a difference equation, such as x(t＋1) = f(x(t)) , t = 0,1,2, ... , where f($.$) is a nonlinear function of x(f). The tent map is used as a nonlinear function to produce the random signals with the uniform distribution. The prototype is implemented by using transistor array devices fabricated in a mass product line. It can be easily realized on a chip. Uniform randomness of the signal is examined by the serial correlation test and the $\chi$2 test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.887-889
• /
• 2004

This paper presents an analysis of RPC probe signal in steam generator tube with defect using finite element method. Impedance signal is calculated according to the depth variation of defect in tube and change of frequency in same defect. As the depth of the defect and the operating frequency is increased, the magnitude of the signal is increased. From the result of this paper, we can obtain the information by the effect of defect and frequency.