• Journal of Electrical Engineering and Technology
• /
• 제3권2호
• /
• pp.162-166
• /
• 2008

This paper presents the design and implementation of a 5kW programmable three-phase harmonic generator, which is capable of generating sinusoidal output voltages with adjustable output amplitude and frequency over a wide range as well as arbitrary waveforms. The considered harmonic generator is a linear power amplifier type. This system consists mainly of a power converter to generate and amplify waveform signals, a controller to control the desired output signal and measure the output parameters including voltage and current, and a control program to set the desired output and display the output values. The prototype programmable three-phase harmonic generator has been constructed and tested. Test results show that the developed programmable three-phase harmonic generator performs well.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1485-1487
• /
• 1987

To improve time delay produced in computation of trigonometric function by software method, the function generator was designed to compute the sine function with ROMs. Since the computation speed of trigonometric function can be improved by this ROM, it will be used in various parts required to scientific calculation-radar, FFT and signal processing etc.

• 전기의세계
• /
• 제22권4호
• /
• pp.11-16
• /
• 1973

This paper presents an optimum control of the field resistance for the self-excited DC shunt generator to keep a constant terminal voltage in case of the load change or the torque variation in the system. The non-linearity of the system is linearized by applying the small signal technique and the linearized equation is solved by the maximum principle with the digital computer. The optimal control value of the field resistance for the step error of the generator output voltage is obtained and the transient voltage characteristics in the system are investigated.

• 한국통신학회논문지
• /
• 제38C권11호
• /
• pp.1044-1050
• /
• 2013

본 논문은 ETRI에서 개발한 GPS RF 신호생성기와 상용수신기인 U-Blox 수신기를 이용하여 기만신호의 공격을 완화하는 방법에 대하여 분석하였다. 기만신호는 대상 수신기의 코드 및 반송파 성분의 변이를 이용하여 대상수신기가 비정상적인 위치를 생성하도록 하는 것이다. 우리는 이러한 기만신호 공격에 따른 수신기에서의 신호세기 및 항법해 영향을 분석하였다. 또한 기만신호를 제거하기 위하여 기만신호와 역위상 코드를 가지는 신호를 고려하였다. GPS RF 신호생성기를 이용하여 정상적인 GPS 신호, 기만신호, 기만신호와 역위상을 가지는 항기만신호를 생성하였고 기만신호와 항기만신호간의 코드 위상차이에 따른 기만신호 공격의 영향을 수신기를 통하여 확인하였다. 기만 신호의 코드 지연과 동일한 코드지연의 신호를 생성할 경우 기만신호가 상쇄되는 것을 확인하였다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.985-993
• /
• 2008

This paper proposes a new DFIG(Doubly-Fed Induction Generator) system using matrix converter, which is very effectively used for interconnecting the wind power system to the power grid. The operation of proposed system was verified by computer simulations with PSCAD/EMTDC software. The feasibility of hardware implementation was conformed by experimental works with a laboratory scaled-model of wind power system. The laboratory scaled-model was built using a motor-generator set with vector drive system, and a matrix converter with DSP(Digital Signal Processor). The operation of scaled-model was tested by modeling the specific variable-speed wind turbine using the real wind data in order to make the scaled-model simulate the real wind power system as close as possible. The simulation and experimental results confirm that matrix converter can be applied for the DFIG system.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.375-383
• /
• 2011

This paper describes a real-time hardware simulator for a grid-tied Permanent Magnet Synchronous Generator (PMSG) wind power system, which consists of an anemometer, a data logger, a motor-generator set with vector drive, and a back-to-back power converter with a digital signal processor (DSP) controller. The anemometer measures real wind speed, and the data is sent to the data logger to calculate the turbine torque. The calculated torque is sent to the vector drive for the induction motor after it is scaled down to the rated simulator power. The motor generates the mechanical power for the PMSG, and the generated electrical power is connected to the grid through a back-to-back converter. The generator-side converter in a back-to-back converter operates in current control mode to track the maximum power point at the given wind speed. The grid-side converter operates to control the direct current link voltage and to correct the power factor. The developed simulator can be used to analyze various mechanical and electrical characteristics of a grid-tied PMSG wind power system. It can also be utilized to educate students or engineers on the operation of grid-tied PMSG wind power system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.844-846
• /
• 1999

A speed signal of governor, which control the output and speed of a generator, is important because a signal failure can be causing the shutdown of a power plant. thus, it is necessary to introduce switching method with two complementary signal. This paper presents a comparative study of speed signal switching methods. One of the Proposed methods has been tested at a power plant in Pukcheju and the approach described here is expected to be of wide applicability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1306-1307
• /
• 2015

As a basic research for the detection of GPS spoofing signal we study to generate a GPS fake signal which can mislead GPS receivers, and show that the fake signal is generated and transmitted through a pseudolite and the GPS receivers produce a wrong position as designated in the fake signal.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.821-824
• /
• 2005

This paper presents a technique to evaluate torque and speed characteristics of induction motor with the Dynamometer. The simple Dynamometer controlled via microcontroller and displayed by computer. The Microcontroller generates the PWM (Pulse Width Modulation) signal and control the duty cycle of signal for control braking level. The Buck converter is a braking unit which uses IGBT as switch in circuit. The output current of the Buck converter and output voltage of tacho generator are converted to digital signals and analyzed by microcontroller. The signals are then sent to computer for displaying torque and speed responds independent on the braking time. The test results of the Dynamometer in this research can coreectly predict the torque and speed response under reasonable tests. Moreover, this Dynamometer is easy and inexpensive to make.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.1139-1146
• /
• 2010

Simulated target generators are used to evaluate the various radar performance. Using the radar parameters such as target range(time delay), doppler frequency, target RCS, simulated target generator can be developed. Especially moving targets are simulated by control time delay and update target signal intensive for target range. Base on this concepts, in this paper, simulated target generators are designed and developed for X-band Radar performance test. Developed equipment is evaluated its performance and then tested with X-band Radar. This paper presents these design, development, and test results of developed target generator.