• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.4
• /
• pp.172-179
• /
• 1988

A cartridge type hydraulic logic valve consists of simple two port valve whose poppet is closed or opened by means of pressure signal of a pilot line. Accordingly, the logic valve can be used not only for direction, flow and pressure control purpose but also for versatile function valve which enables all above mentioned functions. In addition, the valve has little internal leakage and pressure loss, superior response characteristics and easiness in making small block type valve. The above mentioned good performances being recognized recently, the logic valve has been used widely in the large scale hydraulic system such as a hydraulic press system, for the performance requirements of high speed operation and precise control characteristics. However, there are scarce reports until now, except for a few ones from Aachen Institute of Technology in West Germany, so it is necessary to be studied on development and investigation for practical application. This paper showed that the static and dynamic characteristics of a logic valve when the logic valve is used for directional control, to investigate the relations between the valve operating characteristics and the valve design conditions. From the above mentioned procedure, it was ascertained that the valve operation characteristics obtained by numerical analysis showed good agreements with experimental results. The representative results obtained are as follows; 1. During the valve is closing, the poppet velocity is almost constant in the logic valve. 2. The pilot pressure P sub(3) and the resistance R in the pilot line have much influences on the valve operation time. 3. Spring strength have not such a severe influence on the valve operating time. 4. The operation characteristics of the logic valve can be estimated with good accuracy comparatively by numerical analysis with the equations describing poppet motion.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1933-1954
• /
• 2013

Multiple wireless devices are being widely deployed in Intelligent Transportation System (ITS) services on the road to establish end-to-end connection between vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) networks. Vehicular ad hoc networks (VANETs) play an important role in supporting V2V and V2I communications (also called V2X communications) in a variety of urban environments with distinct topological characteristics. In fact, obstacles such as big buildings, moving vehicles, trees, advertisement boards, traffic lights, etc. may block the radio signals in V2X communications. Their impact has been neglected in VANET research. In this paper, we present a realistic and efficient radio propagation model to handle different sizes of static and moving obstacles for V2X communications. In the proposed model, buildings and large moving vehicles are modeled as static and moving obstacles, and taken into account their impact on the packet reception rate, Line-of-sight (LOS) obstruction, and received signal power. We use unsymmetrical city map which has many dead-end roads and open faces. Each dead-end road and open faces are joined to the nearest edge making a polygon to model realistic obstacles. The simulation results of proposed model demonstrates better performance compared to some existing models, that shows proposed model can reflect more realistic simulation environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1571-1578
• /
• 1999

In this paper, we present the Modulator Channel Card and VLSI chip for the Radio Transceiver Unit (RTU) of direct sequence code division multiple access (DS-CDMA) Wireless Local Loop (WLL) System. The Modulator Channel Card is designed and implemented using ASIC's, FPGA's and DSP's. The ASIC, compliance with Common Air Interface specification proposed by ETRI, has 40K gates which is designed to operate at 32MHz, and is fabricated using $0.6\mu\textrm{m}$ CMOS process. The ASIC carries out for I- or Q- phase data channel signal processing at a time, where each data channel processing consists of channel coding, block interleaving, scrambling, Walsh modulation, Pseudo-Noise (PN) spreading, and baseband filtering. The Modulator Channel Card has been integrated as a part of RTU of WLL system and is confirmed that it meets all functional and performance requirements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1147-1155
• /
• 2008

In this paper, we derive the probability density function (PDF) of end-to-end signal-to-noise ratio (SNR) for t he dual-hop MIMO (Multiple-Input Multiple-Output) DCF (Decouple-and-Forward) system. We also provide the end-to-end bit error ratio (BER) with M-ary PSK constellations for four antenna combinations. These are (1,8,1), (8,1,8), (2,4,2), and (4,2,4). Each number in the parentheses is the number of the transmit antenna at the source, the transmit and receive antenna at the relay and the receive antenna at the destination, respectively. We show t hat the end-to-end BER expression with M-ary PSK constellations makes an exact match with numerical results. We also show that MIMO DCF relay system achieves spatial diversity.

• Animal cells and systems
• /
• v.1 no.1
• /
• pp.81-86
• /
• 1997

We studied the mechanism of arachidonic acid on the secretion of a neurotransmitter in rat pheochromocytoma PC12 cells. Arachidonic acid inhibited the 70 mM $K^+$-induced secretion of norepinephrine. Arachidonic acid also inhibited the 70 mM $K^+$-induced $Ca^{2+}$ mobilization which is due to the opening of the voltage-sensitive $Ca^{2+}$ channels (VSCC). Both the half maximal inhibitory concentration ($IC_{50}$) of the norepinephrine secretion and VSCC coincided at 30 uM. The major oxidized metabolites of arachidonic acid, prostaglandins did not mimic the inhibitory effect of arachidonic acid. Nordihydroguaiaretic acid (NDGA) and indomethacin which are inhibitors of lipoxygenase and cyclooxygenase, respectively, did not block the inhibitory effect of arachidonic acid. The results suggest that arachidonic acid serves as a signal itself, not in the form of metabolites. The pretreatment of various $K^+$ channel blockers such as 4-aminopyridine, tetraethylarnmonium, glipizide, or glibenclamide also did not show any effect on the inhibitory effect of arachidonic acid. Through these results we suggest that arachidonic acid regulates VSCC directly and affects the secretion of neurotransmitters.

• The Journal of Korean Medicine
• /
• v.19 no.2
• /
• pp.36-49
• /
• 1998

HERBA SAURURI (HS) has been known to use antiinflammatory drug. To investigated the mechanism of HS-induced NO synthesis, I evaluated the ability of protein kinase C (PKC) inhibitors such as staurosporine (STSN) or polyymyxin B to block HS-induced effects. HS alone had only a small effect, whereas in combination with $rIFN-{\gamma}$, markedly increased NO synthesis in a dose dependent manner. STSN and polymyxin B decreased NO synthesis, which had been induced by $rIFN-{\gamma}$, plus HS. Furthermore, prolonged incubation of the cells with phorbol ester, which down-regulates PKC activity abolished synergistic cooperative effect of HS with $rIFN-{\gamma}$ on NO synthesis. STSN and Polymyxin B potently inhibited HS-induced $TNF-{\alpha}$ secretion by $rIFN-{\gamma}$ plus HS. However, $rIFN-{\gamma}$ plus $TNF-{\alpha}-induced$ NO synthesis was not blocked by STSN or polymyxin B. On the other hand, tyrosine kinase inhibitor, genistein, blocked the NO synthesis and $TNF-{\alpha}$ secretion by $rIFN-{\gamma}$ plus HS. In conlusion, the present results strongly suggest that the capacity of HS to increase NO synthesis from $rIFN-{\gamma}-primed$ macrophages is the result of HS-induced $TNF-{\alpha}$ secretion via the signal transduction pathway of PKC and tyrosine kinase.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.9
• /
• pp.373-383
• /
• 2003

In this paper we discuss the effect of the delay limit and the packet size related to the quality of service on a VoIP system using the Internet. We also provide a guideline to determining the optimal packet size of the voice data for a given delay limit. Empirical studies are done with two personal computers connected through the packet switched public IP network. The sender encodes the voice signal from the microphone to get PCM and ADPCM data and sends the data to the receiver using UDP packets. The receiver plays the reconstructed voice from the stream with lost and delayed packets. The quality of the reconstructed voice is evaluated offline by the MNB (Measuring Normal Block) method using the data acquired from the both sides. The result shows that under the delay limit of 100ms for 40Kbps, 32Kbps and l6Kbps of ADPCM data, the minimum packet size should be 300bytes, 400bytes and 600bytes respectively and the maximum packet size should be l200bytes commonly for the best quality of voice.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.115-122
• /
• 2016

In this paper, wideband Ku-band downconverter was designed to receiver digital satellite broadcasting. The low-nose downconverter was designed to form four local oscillator frequencies(9.75, 10, 10.75 and 11.3 GHz) representing a low phase noise due to VCO-PLL with respect to input signals of 10.7 to 12.75 GHz and 3-stage low noise amplifier circuit by broadband noise matching, and to select intermediate frequency bands by digital control. The developed low-noise downconverter exhibited the full conversion gain of 64 dB, and the noise figure of low-noise amplifier was 0.7 dB, the P1dB of output signal 15 dBm, and the phase noise -85 dBc@10kHz at the band 1 carrier frequency of 9.75 GHz. The low noise block downconverter(LNB) for wideband digital satellite broadcasting designed in this paper can be used for global satellite broadcasting LNB.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.72-80
• /
• 2020

This paper describes the design and fabrication of a BUC(Block Up-converter) which is a component of a FST (Flyaway Satellite Terminal), one of the ET(Earth Terminal) of the military satellite. BUC is physically composed of an up-converter module, a high power amplifier module, a receive band suppression filter, a housing, and a cable assembly. It was designed using simulator AWR to satisfy the electrical characteristics of BUC's such as maximum output power, gain, unwanted signal, and intermodulation. The maximum output power and gain characteristics were measured at 43.4dBm and 51.8dB, respectively. The unwanted wave and intermodulation characteristics were -73.5dBc and -31.9dBc, respectively. Of the electrical requirements of Table 1, not only the above four but also all of the items were confirmed to be satisfied.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.81-89
• /
• 2020

This paper describes the design and fabrication of a LNB(Low Noise Block downd-converter) which is a component of a FST(Flyaway Satellite Terminal), one of the ET(Earth Terminal) of the military satellite. LNB is physically composed of an down-converter module, a low noise amplifier module, a transmit band suppression filter, a isolator, a housing, and a cable assembly. It was designed using simulator (AWR) to satisfy the electrical characteristics of LNB's such as gain, noise figure and unwanted signal. The gain and noise figure characteristics were measured at 61.4dBm and 1.37dB, respectively. The unwanted wave was measured at -66.79dBc. Of the electrical requirements of Table 1, not only the above three but also all other items were confirmed to be satisfied.