• 대한조선학회논문집
• /
• 제49권6호
• /
• pp.498-503
• /
• 2012

Independent component analysis (ICA) technique based on statistical independency of the signals is known as suitable to identify the source signals by measuring and separating mixed signals through transfer paths and has successfully applied in the field of medical care, communications and so forth. In this study, the ICA technique is introduced for the identification of excitation sources from measured vibration signals of structures, which can be done by evaluating negentropy of centered and whitened vibration signals and correlation of separated signals. To validate the method, numerical analyses are carried out for a plate and a cylinder structure. The results show that the method can be applied efficiently to source identification of complex structures. Nevertheless, additional studies would be required to complement problems of occasional inaccuracy.

• 전기의세계
• /
• 제17권2호
• /
• pp.11-15
• /
• 1968

One of the most important methods used in the modern analysis of linear networks and systems is the signal flow graph technique, first introduced by S.J. Mason in 1953. In essence, the signal-flow graph technique is a graphical method of solving a set of simultaneous. It can, therefore, be regarded as an alternative to the substitution method or the conventional matrix method. Since a flow-graph is the pictorial representation of a set of equations, it has an obvious advantage, i.e., it describes the flow of signals from one point of a system to another. Thus it provides cause-and-effect relationship between signals. And it often significantly reduces the work involved, and also yields an easy, systematic manipulation of variables of interest. Mason's formula is very powerful, but it is applicable only when the desired quantity is the transmission gain between the source node and sink node. In this paper, author summarizes the signal-flow graph technique, and stipulates three rules for conversion of an arbitrary nonsource node into a source node. Then heuses the conversion rules to obtain various quantities, i.e., networks gains, functions and parameters, through simple graphical manipulations.

• The Journal of the Acoustical Society of Korea
• /
• 제25권4E호
• /
• pp.142-147
• /
• 2006

Blind signal separation is known as a powerful tool for enhancing noisy speech in many real world environments. In this paper, it is demonstrated that the performance of blind signal separation can be further improved by combining with a null beamformer (NBF). Cascading the blind source separation with null beamforming is equivalent to the decomposition of the received signals into the direct parts and reverberant parts. Investigation of beam patterns of the null beamformer and blind signal separation reveals that directional null of NBF reduces mainly direct parts of the unwanted signals whereas blind signal separation reduces reverberant parts. Further, it is shown that the decomposition of received signals can be exploited to solve the local stability problem. Therefore, faster and improved separation can be obtained by removing the direct parts first by null beamforming. Simulation results using real office recordings confirm the expectation.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2523-2532
• /
• 1994

In this paper, active noise control is performed in a duct system using the periodic pulse train which corresponds to the periodic component of noise source as a reference signal. Control algorithm applied in this study is possible to eliminate the acoustic feedback which occurs in the conventional filtered-x and filtered-u LMS algorithm by using electrical reference signal and has the fast adaptation speed with low filter orders by using synchronous sampling method is discussed via computer simulations and experiments of case studies such as frequency modulation, amplitude modulation and frequency differency between source signal and reference signal.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.65-71
• /
• 2001

In this paper, acoustic omission technique(AE) has been applied to detect leak for heat exchanger by analyzing the characteristics of signal obtained from leak. It was confirmed that the characteristics of the signal generated by the turbulence of gas in the heat exchanger is narrow band signal having between 130-250KHz. Generally, the amplitude of leak signal is increased as the leak size increasing, but showed no significant change at frequency characteristic. Leak source location can be found by searching for the point of highest signal amplitude by comparing wi th several fired sensors.

• Journal of Communications and Networks
• /
• 제14권4호
• /
• pp.410-417
• /
• 2012

One of the premier mechanisms used in extracting unobserved signals from observed mixtures in signal processing is employing a blind source separation (BSS) algorithm. Orthogonal frequency division multiplexing (OFDM) techniques are playing a prominent role in the sphere of multicarrier communication. A set of remedial solutions taken to mitigate deteriorative effects caused within the air interface of OFDM transmission with aid of BSS schemes is presented. Four energy functions are used in deriving the filter coefficients. Energy criterion functions to be optimized and the performance is justified. These functions together with iterative fixed point rule for receive signal are used in determining the filter coefficients. Time correlation properties of the channel are taken advantage for BSS. It is tried to remove colored noise and jamming components from themixture at the receiver. Themethod is tested in a slow fading channel with a receiver containing equal gain combining to treat the channel state information values. The importance is that, these are quite low computational complexity mechanisms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.136-138
• /
• 2000

This paper describes an efficient location detection algorithm for a partial discharge(PD) source in the transformer. The algorithm is previously proposed is not suitable for PD source detection because ultrasonic signal is diminished through the inner structure. In this paper, the proposal algorithm find PD source using geometry method and 3th sensor on the one side of transformer without diminution of ultrasonic signal. The proposed algorithm demonstrates the effectiveness and validity on model transformer.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.774-779
• /
• 2004

This paper addresses the way in which we can find where impact noise sources are. Specifically, we have an interest in the case that the signal is embedded in noise. We propose a signal processing method that can identify impulsive sources’location. The method is robust with respect to noise; spatially distributed noise. This has been achieved by a beamforming method with regard to cepstrum domain is used. It is noteworthy that the cepstrum has the ability to detect periodic pulse signal in noise. Numerical simulation and experiments are performed to verify the method. Results show that the proposed technique is quite powerful for localizing the faults in noisy environments. The method also required less microphones than conventional beamforming method.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.877-883
• /
• 2004

This paper addresses the way in which we can find where impulsive noise sources are. Specifically, we have an interest in the case that the signal is embedded in noise. We propose a signal processing method that can identify impulsive sources' location. The method is robust with respect to spatially distributed noise. This has been achieved by the modified beamforming method with regard to cepstrum domain is used. It is noteworthy that the cepstrum has the ability to detect periodic pulse signal in noise. Numerical simulation and experiments are performed to verify the method. Results show that the proposed technique is quite powerful for localizing the faults in noisy environments. The method also required less microphones than conventional beamforming method.

• 대한기계학회논문집A
• /
• 제30권9호
• /
• pp.1154-1159
• /
• 2006

In this paper, time-frequency analysis and multi-dimensional spectral analysis methods are applied to source identification and diagnostic of non-stationary sound vibration signals. By checking the coherences for concerned time, this simulation is very well coincident to expected results. The proposed method analyzes the signal instantaneously in both time and frequency domains. The MDSA (Multiple Dimensional Spectral Analysis) analyzes the signal in the plane of instantaneous time and instantaneous frequency at the same time. And it was verified by using the 1500cc passenger car which is accelerated from 70Hz to 95Hz in 4 seconds, the proposed method is effective in determining the vehicle diagnostic problems.