• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.2
• /
• pp.127-134
• /
• 2022

In this paper, a low-cost, flexible GPS simulator based on USRP is designed as a general-purpose software wireless front-end. The simulator consists of a software GPS signal generator and a USRP-based RF transmitter. The simulator supports various scenarios including specified reception time, quantization bit level, I/Q data types, IF frequency, sampling frequency, SNR, ionospheric delay and user dynamics. The generated GPS RF signal is verified using the spectrum analyzer and off-the-shelf GNSS receivers such as U-blox M8T. The experimental results shows that the difference between generated and real live signal is ignorable. It is expected that designed GPS simulator can be used to GNSS signal design, receiver design and signal processing algorithms such as anti-jamming.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.530-533
• /
• 2005

A raw signal simulator for synthetic aperture radar (SAR) is a useful tool for the design and implementation of SAR system. Also, in order to analyze and verify the developed SAR processor, the raw signal simulator is required. Moreover, there is the need for a test system to help designing new SAR sensors and mission of SAR system. The derived parameters of the SAR simulator also help to generate accurate SAR processing algorithms. Although the ultimate purpose of this research is to presents a general purpose SAR simulator, this paper presents a SAR simulator in frequency domain at the first step. The proposed simulator generates the raw signal by changing various simulation parameters such as antenna parameters, modulation parameters, and sampling parameters. It also uses the statistics from an actual SAR image to imitate actual physical scattering. This paper introduces the procedures and parameters of the simulator, and presents the simulation results. Experiments have been conducted by comparing the simulated raw data with original raw SAR image. In addition, the simulated raw data have been verified through commercial SAR processing software.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.153-164
• /
• 2019

This paper presents the development of an end-to-end numerical simulator for signal design of the next generation global navigation satellite system (GNSS). The GNSS services are an essential element of modern human life, becoming a core part of national infra-structure. Several countries are developing or modernizing their own positioning and timing system as their demand, and South Korea is also planning to develop a Korean Positioning System (KPS) based on its own technology, with the aim of operation in 2034. The developed simulator consists of three main units such as a signal generator, a channel unit, and a receiver. The signal generator is constructed based on the actual navigation satellite payload model. For channels, a simple Gaussian channel and land mobile satellite (LMS) multipath channel environments are implemented. A software receiver approach based on a commercial GNSS receiver model is employed. Through the simulator proposed in this paper, it is possible to simulate the entire transceiver chain process from signal generation to receiver processing including channel effect. Finally, numerical simulation results for a simple example scenario is analyzed. The use of the numerical signal simulator in this paper will be ideally suited to design a new navigation signal for the upcoming KPS by reducing the research and development efforts, tremendously.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.381-388
• /
• 2022

In 2021, development of a regional satellite navigation system called KPS was approved. In this regard, various studies are in progress, but there is no published signal model. So, in relation to the user segment, it is necessary to design a user receiver, but there is no information. Therefore, in this paper, we assume a signal model that can be a candidate signal for KPS based on related studies. This signal uses CNAV-2 structure navigation message, truncated Gold code and BPSK modulation. Based on this signal, a simulator is designed that can be used for receiver design later. The simulator consists of a signal generator and a signal transmitter, and is verified using a software receiver and spectrum analyzer.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.3
• /
• pp.343-349
• /
• 2012

To detect targets for autonomous navigation of unmanned ground vehicle, mounted sensors are required to work all-weather condition. In this point of view, the FMCW radar is quietly appropriate. In this paper, we present development results of target signal simulator for multi-beam type FMCW radar. A target signal simulator make pseudo target signals which simulates multiple moving targets. And we describe how to make hit information for each target in multi-beam type radar. The developed methods are utilized for target tracking device. Moreover it can be applied to similar target signal simulator.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.3
• /
• pp.36-43
• /
• 2003

Multi-target away signal simulator which can simulate the radiated noises of maneuvering targets in a specified ocean range is an essential equipment for the validation of developed towed array sonar system. This simulator should provide realistic multi-channel signals those are required for beamforming on the signal processing unit of towed away system. This paper describes the overall system configuration and signal synthesis techniques for the target radiated noise. And this paper considers why the time delays between target and individual sensors are caused and how to compensate these time delays to individual sensors output. This multi-purpose target simulator could be used for the training of TASS operators.

• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.276-283
• /
• 2000

This paper presents the configuration of simulator for the functional test of TCMS on developing. This simulator is composed of three cabinets. There is equipped the TCMS system which have the same configuration of 1 train(SMG Line 7＆8) on the two cabinets. And there are equipped VME PC, VME CPU Board and I/F modules on the rest cabinet. This simulator has tow parts, which are user I/F part and Real-time signal processing part. We programed user I/F part with Visual C++ to support GUI function, and signal processing part with RTOS to support Real-Time signal processing. This simulator can produce all the signal and data for the TCMS functional testing.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.39-46
• /
• 2004

This paper presents the realization schemes for a multipurpose coherent mono-pulse radar Simulator with extendable features. We developed and installed the TSG(Timing Signal Generator) board which can simulate a mechanically rotate signal of antenna, an operation timing signal of pulse radar and target signal, to operate the simulator without real target in the indoor environment. Also, with the insertion of the radar signal processor, it came to be easy to achieve the addition of radar function algorithms, to rebuild or extend the multi-DSP Architecture into the simulator. Throughout the simulation results, we verified that the designed coherent mono-pulse radar simulator can exactly display a moving target on the realistic monitor(RD 9800).

• Journal of Satellite, Information and Communications
• /
• v.2 no.1
• /
• pp.41-47
• /
• 2007

Software GNSS digitized IF signal simulator is being developed by ETRI as a part of development of software-based GNSS Test & evaluation Facility which will provide test and evaluation environment for various software level application and navigation algorithm in GNSS. Software GNSS IF signal simulator will provide digitized GNSS signal including GPS and Galileo. The requirement analysis and conceptual design for the Software GNSS IF signal simulator is presented in this paper.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.341-351
• /
• 2021

In this paper, a GNSS error generation simulator for Signal Quality Monitoring (SQM) is implemented by using Matlab based on mathematical models derived from the effect of GNSS signal and measurement errors. The GNSS signal measurement errors of interest in this paper include three cases such as Evil Wave Form (EWF), Multipath (MP) and Radio Frequency Interference (RFI). In order to verify the validity of the generated measurement errors, a simple form of metrics for detecting and monitoring GNSS errors is included in the simulator. The GNSS errors generated by the simulator are added to the GNSS measurement data from commercial GNSS receiver in real time, and then, the SQM is tested for various scenarios of each case configured by scenario setting of the user.