• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.107-110
• /
• 2005

This paper describes the design and fabrication of synchronous clock recovery module for S-DMB Gap Filler. Using the 2.304MHz TTL signal from gap filler tuner, clock recovery module with 10MHz output frequency including holdover function is designed. The measured performance of the clock recovery module shows a stability of less than 0.01ppm, 29 sec stability time, 10 sec holdover time, and maximum -113dBc/Hz@100Hz phase noise.

• 한국항행학회논문지
• /
• 제15권4호
• /
• pp.591-595
• /
• 2011

본 논문에서는 차세대 유럽형 방송 시스템인 DVB-T2(Digital Video Broadcasting-Second Generation Terrestrial) 수신기의 핵심블록인 BICM(Bit Interleaved Coded Modulation) 모듈의 구조를 설계하고 DSP(Digital Signal Processor) TMS320C6474를 통해 구현하였다. 실험결과를 통해 8비트 이상을 사용하는 고정소수점 BICM 모듈이 부동소수점 BICM 모듈과 거의 동일한 BER(Bit Error Rate) 성능을 나타냄을 알 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권5호
• /
• pp.273-278
• /
• 2004

This paper analyzed the phase noise characteristics of frequency-shifting module by figuring out the relationship between the phase noise components of 1st and 2nd local oscillator composing the frequency-shifting module and those of RF output signals shifted in frequency. Also, frequency-shifting module with the improvement of the phase noise performance was designed and implemented by means that the phase noise components of 1st local oscillator were cancelled in the output signal. Output signal has been affected by only phase noise of 2nd local oscillator, which had excellent phase noise performance than that of the 1st local oscillator.

• 한국정보통신학회논문지
• /
• 제13권5호
• /
• pp.1008-1013
• /
• 2009

본 논문에서는 피실험자의 체온, 맥박, 호흡수, 혈압을 수집할 수 있는 무선 센서를 이용하여 수집된 생체 신호를 분석하는 시스템을 제안하였으며, 생체 신호를 분석하기 위하여 전문가 시스템을 사용하여 역전파 신경망을 설계 하였다. 제안된 시스템은 하드웨어 (UStar-2400 ISP, UStar-2400, Wireless sensors) 부분과 소프트웨어 부분 (Knowledge Base module, Inference Engine module, User Interface module)으로 구성되며 소프트웨어 부분은 HOST PC에 삽입된다. 그리고 시스템의 정확도를 개선하기 위하여 전방향 에러 정정 시스템(LDPC)을 구현하였다. 지식기반 모듈에서 100개의 데이터 집합을 사용하여 역전파 신경망을 훈련하였으며, 지식기반 모듈의 128개의 데이터 집합을 사용하여 실험한 결과 약 95%의 정확도를 가졌으며, 무선 센서를 사용하여 13명의 학생을 대상으로 실험한 결과 약 85%의 정확도를 획득하였다.

• 한국음향학회지
• /
• 제15권1호
• /
• pp.93-101
• /
• 1996

본 논문에서는 전화가입자에게 보다 향상된 여러 가지 음성 서비스를 제공하기 위한 음성 처리 시스템을 구현하였다. 음성 신호처리만을 수행하는 전용 보드를 개발하고 하나의 마스터 보드가 여러 장의 DSP(Digital Signal Processing) 보드를 제어하여 음성의 저장과 재생기능을 수행하는 시스템을 다중 보드 구성에 적합한 방식인 VME버스를 사용하여 하드웨어를 구성하였다. 마스터 보드로서는 CPU30 보드를 사용하였고 DSP 보드로는 음성 입출력을 위한 전용 하드웨어인 SPM(Signal Processing Module) 보드를 제작하여 시스템 성능 평가를 하였다.

• ETRI Journal
• /
• 제35권1호
• /
• pp.1-6
• /
• 2013

In this paper, we present an implemented serial 40-Gb/s receiver optical subassembly (ROSA) module by employing a proposed TO-CAN package and flexible printed circuit board (FPCB). The TO-CAN package employs an L-shaped metal support to provide a straight line signal path between the TO-CAN package and the FPCB. In addition, the FPCB incorporates a signal line with an open stub to alleviate signal distortion owing to an impedance mismatch generated from the soldering pad attached to the main circuit board. The receiver sensitivity of the ROSA module measures below -9 dBm for 40 Gb/s at an extinction ratio of 7 dB and a bit error rate of $10^{-12}$.

• 오토저널
• /
• 제15권3호
• /
• pp.89-95
• /
• 1993

This paper presents the development of CAD system for the design of lens of the Turn Signal Lamp that can model and simulate its optical performance. The system consists of three main modules: skin surface modeling module, inner lens modeling module and optical performance simulation module. Skin surface geometry can be modeled by the input of data file and inner lens can be modeled by the input of only four parameter using its geometric characteristics. Also light distribution pattern, the barometer of optical performance is generated by means of finite ray tracing method. The system display modeled geometry, ray tracing and generated light distribution pattern.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.481-484
• /
• 2002

In recent, the contactless IC card is widely used in traffic, access control system and so forth. And its use becomes a general tendency more and more because of the development of RF technology and improvement of requirement for user convenience. This paper describes the hardware module to process contactless protocol for implementation contactless IC card. And the hardware module consists of specific digital logic circuits that analyze digital signal from analog circuit and then generate data & status signal for CPU, and that convert the data from CPU into digital signal for analog circuit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1649-1651
• /
• 2002

Ultra-wide bandwidth (UWB) detection method has been widely used as a front end detection scheme for the ultra-high frequency (UHF) partial discharge (PD) monitoring systems. A broad-band video detector module was developed and characterized for the UHF UWB PD detection systems. The useable bandwidth of the module is more than 2 GHz and it is optimized for 50-ohm systems. The detection sensitivity and dynamic range of the module were characterized by using a known ns-width RF pulses of GHz range. The dynamic range is more than 6-decades and the module can detect pulsed RF signals down to 1 nW. The detector module can eliminate expensive equipment such as high speed oscilloscopes and radio frequency (RF) spectrum analyzers. Therefore, it enables one to use slow speed data acquisition systems for the PD monitoring at the UHF range. The detector module was used to detect real PDs of about <3 pC. The module converts the UWB PD signals into a low-bandwidth video signal with a high signal-to-noise ratio.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2231-2236
• /
• 2005

CP (Cellular Phone) is currently one of the most attractive technologies and RT (Robot Technology) is also considered as one of the most promising next generation technology. We present a new technological concept named RCP (Robotic Cellular Phone), which combines RT and CP. RCP consists of 3 sub-modules, $RCP^{Mobility}$, $RCP^{Interaction}$, and $RCP^{Integration}$. $RCP^{Interaction}$ is the main focus of this paper. It is an interactive emotion system which provides CP with multi-emotional signal receiving functionalities. $RCP^{Interaction}$ is linked with communication functions of CP in order to interface between CP and user through a variety of emotional models. It is divided into a tactile, an olfactory and a visual mode. The tactile signal receiving module is designed by patterns and beat frequencies which are made by mechanical-vibration conversion of the musical melody, rhythm and harmony. The olfactory signal receiving module is designed by switching control of perfume-injection nozzles which are able to give the signal receiving to the CP-called user through a special kind of smell according to the CP-calling user. The visual signal receiving module is made by motion control of DC-motored wheel-based system which can inform the CP-called user of the signal receiving through a desired motion according to the CP-calling user. In this paper, a prototype system is developed for multi-emotional signal receiving modes of CP. We describe an overall structure of the system and provide experimental results of the functional modules.