• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2022년도 하계학술대회
• /
• pp.228-230
• /
• 2022

본 논문은 최근 잡음 제거에서 우수한 성능을 보인 Nested U-Net의 성능을 최적화하기 위하여 두 단계로 이루어진 two-level skip connection (TLS)을 제안하였다. 이때, 인코더와 디코더의 경로를 다르게 하여 다양한 형태의 TLS을 제안하고 각 형태의 성능을 비교 평가하였다. 또한, 가장 좋은 성능을 보인 두 개의 경로를 조합하여 최종 Nested U-Net 기반 모델을 제안하였다. 제안된 모델은 다른 잡음 제거 모델과 비교하여 객관적인 평가 지표에서 매우 우수한 성능을 보인다.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.416-420
• /
• 2008

This paper proposes a new method to improve signal characteristics at branches frequently met in system-level routing. We also introduce the numerical formula which can estimate the time delay due to branches and the simple design guideline for system-level routing. Finally, we propose the routing method which can eliminate the signal reflection for the case of one driver and two receivers (multi-drop topology).

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.145-148
• /
• 2002

This paper has been studied a predistorter which is able to linierizing of RF amplifier using schottkey. If input signal level is low, input signal is delivered directly. And if input signal level is high, input signal Is delivered with decreasing. So RF amplifier always works at saturation region .When this predistorter is used to simplified C-class RF amplifier, we have concluded that efficiency is improved about 3%.

• 한국산업융합학회 논문집
• /
• 제23권1호
• /
• pp.41-48
• /
• 2020

Currently, the industry uses MODBUS communication method using RS485 as a communication method used when constructing distributed equipment and networks. However, this method has a rather good transmission and reception distance, but has a disadvantage of being a half-duplex communication method. Therefore, there is a great need for a full-duplex communication method that can simultaneously transmit and receive two-wire communications. Therefore, in this paper, we propose a new communication hardware equipment that can implement full-duplex communication method by communication signal level to overcome the disadvantage of communication speed. The proposed communication hardware is a structure that can transmit and receive at the same time on the same communication line in two equipments communicating in a two-wire system. The characteristic of this communication hardware is that the transmitter generates two-level signal for data transmission, but the receiver generates three-level electric signal according to the status of the transmission data generated by the receiver. The data transmission signal information of the receiver is present at the same time. Therefore, the receiving side can analyze the received signal based on the information on the current transmission signal and can analyze the signal only in the two communicating devices, so it can be seen that the communication security is very excellent.

• 전기학회논문지
• /
• 제62권3호
• /
• pp.395-400
• /
• 2013

In this paper, we introduce the implementation of high accurate level sensor system using the pulse wave type magnetostriction sensor. When a current pulse flows along the waveguide, the magnetic field also propagates towards the end of waveguide. When this magnetic field just passes the position of the magnet for level detection, the resultant magnetic field by these two magnetic fields makes a torsional reflected signal. This is used to calculate the time difference between a interrogation pulse wave and this torsional reflected signal. The key elements and characteristics were investigated to implement level sensor system based on this principle. We introduce a method to calculate the speed of ultrasonic reflected signal and how to make a model of sensing coil. In particular, we experiment with the characteristics of the torsional reflected signal according to the changes of the interrogation voltage and displacement. To make high accurate level sensor system, two methods were compared. One is to use the comparator and time counter, the other is STFT(Short Time FFT) which is capable of the time-frequency analysis.

• 전자공학회논문지B
• /
• 제33B권11호
• /
• pp.72-82
• /
• 1996

In this paper, newly developed algorithm for enhancing images corrupted by white gaussian noise is proposed. In the method proposed here, image is subdivided into a number of subblocks, and each block is separated into cimponents corresponding to signal and noise subspaces, respectively through the signal subspace method. A clean signal is then estimated form the signal subspace by the adaptive wiener filtering. The decomposition of noisy signal into noise and signal subspaces in is implemented by eigendecomposition of covariance matrix for noisy image, and by performing blockwise KLT (karhunen loeve transformation) using eigenvector. To reduce the perceptual noise level and distortion, wiener filtering is implementd by adaptively adjusting noise level according to activity characteristics of given block. Simulation results show the effectiveness of proposed method. In particular, edge bluring effects are reduced compared to the previous methods.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권5호
• /
• pp.633-639
• /
• 1995

Dropouts in magnetic media are a primary quality deficiency which is detrimental to magnetic signal quality and thus the major impediment to error-free recording, especially in high density digital recorders. The specific form of defects and causes found to be responsible for signal dropouts occurring in magnetic tape were studied. Dropout occurred when the RF signal falls to low level due to the various types of surface defects. However, the fall in the level of the RF signal in gravure roll coated tapes was most often caused by foreign particles adhering to the magnetic tape. It was also shown from the present study that scattered particles trapped under the tape surface or put on the top can lift it as it crosses the head, creating a spherical tent shaped defect and causing a temporary signal drop. Dropout producing substances were identified through optical and microchemical analyses. The results were correlated with measured electrical signal losses combined with analytical microscopy to clarify source identification of defects.

• 대한의용생체공학회:의공학회지
• /
• 제18권1호
• /
• pp.79-86
• /
• 1997

This paper describes the development of portable arousal measurement and analysis system. Skin impedance change which responds to the change of arousal level was detected by the three elctrode constant current method and separated into two components(SIR, SIL). Relationship between Nz, IRI and arousal level was studied and criteria of arousal level control was decided by the sleep study. Measured data with and without warning signal were compared and analyzed.

• 방송공학회논문지
• /
• 제15권6호
• /
• pp.868-875
• /
• 2010

AT-DMB 는 지상파 DMB를 기반으로 하며, 기존의 지상파 DMB와 역호환성을 유지하면서 전송용량을 증대시키기 위해 개발이 되었다. AT-DMB 관련 전송방식 및 계층적비디오서비스 기술개발 및 표준 제정이 완료되었으며, 데이터 서비스를 포함한 응용서비스 기술들이 개발 중에 있다. 본 논문에서는 AT-DMB 시스템에서 성상비 변화에 따른 전송 신호들의 전력변화를 고찰하고 이를 감소시켜 전송 성능을 개선하기 위한 방법을 제시한다. 이 방법을 적용하여 AT-DMB의 B 모드 및 Q 모드 모두에서 계층 변조된 신호들의 전력을 균일하게 유지시킬 수 있음을 확인하였다.

• 융합신호처리학회논문지
• /
• 제3권2호
• /
• pp.58-63
• /
• 2002

OFDM 시스템에 있어서 송신 신호의 큰 PAPR는 비선형 증폭기를 통과할 때 심각한 신호 왜곡을 일으킨다. 이러한 PAPR을 감소하는 방법으로, 본 논문에서는 가장 간단한 클리핑 방법을 사용하여 시스템에 미치는 영향을 BER 특성의 기준으로 나타내고 제안된 시스템과 다른 여러 가지 시스템들을 비교하였다. 본 논문에서 제안한 방법은 QPSK 매핑후에 매핑된 신호사이에 0을 삽입하는 방법을 사용하여 동일한 PAPR 조건하에서 시스템에 미치는 영향을 비교하였다. 또한 다른 시스템들과의 BER 성능에 대한 데이터 전송률과 대역폭 관계의 trade-off가 있음을 보였다.