• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.252-257
• /
• 2010

SAR has pulse compression gain through the process including range and azimuth. Efficient jammers against the SAR with simulated elements are evaluated in the view of power and SAR image. In this paper, J/S is analysed for SAR with RF propagation equation firstly. Several jamming signals on SAR signal are made into SAR image through pulse compression process. Objective jamming performance is evaluated using euclidean distance.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.280-282
• /
• 2005

급변하는 컴퓨터 네트워킹 환경에서 이동화에 따른 무선통신의 비중이 날로 더해지고 있다. 본 논문에서는 무선 인터넷 프로토콜 표준인 IEEE 802.11의 문제점들을 분석하고, Multi-Hop Ad Hoc Network에서 성능 향상을 위하여 Single-channel Jamming 신호를 기반으로 한 SJMAC(Single-channel Jamming MAC) 프로토콜을 설계하고, NS2 모듈을 구현한 후에 성능 평가를 하였다. 기존 IEEE 802.11과의 성능 비교를 위하여 NS2 (Network Simulator2)[1]에 SJMAC 모듈을 추가하여 제안된 프로토콜의 성능을 검증한다.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.771-776
• /
• 2014

In this paper, an agile programmable chirp spread spectrum generator for wideband frequency-jamming applications from 20 MHz to 3 GHz is proposed. A frequency-mixing architecture using two voltage-controlled oscillators is used to achieve a wideband operating frequency range, and the direct digital synthesizer (DDS)-based chirping method with a two-point modulation technique is employed to provide a programmable and consistent chirp bandwidth. The proposed signal generator provides the various programmable FM signals from 20 MHz to 3 GHz with a modulation bandwidth from 0 to 400 MHz. The prototype successfully demonstrates arbitrary sequential jamming operation with a fast band-to-band hopping time of < 10 ${\mu}sec$.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.58-65
• /
• 2017

Global navigation satellite system (GNSS) has a weakness of signal integrity caused by broadcasting type data transmitting direct to user from navigation satellite. Loss of GNSS signal integrity can make a catastrophic event in the operation of unmanned aerial system (UAS) because position decision is only depended on GNSS. So it is required to apply alternative method to reduce a risk and to guarantee a GNSS signal integrity for UAS operation. This paper addressed the reason of loosing GNSS signal integrity, the effectiveness of signal jamming/spoofing and GNSS application trend for UAS. Also suggested the flight safety enhancing method in case of GNSS signal jamming for UAS as technical and political approaches.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1728-1735
• /
• 2011

In this paper, satellite data link waveform is proposed which is based on the waveform of Link-16 but LDPC code is studied instead of CCSK code in order to be optimized to satellite nonlinear channel environment and transmission characteristics. And the DSM (Demux, Selective CH switch, and Mux) transponder structure is suggested which can remove all of the jamming signal out of the transmission signal band and convert uplink hopping frequency to desired ones of downlink. The results of BER and anti-jamming performance analysis shows that the required Eb/No and processing gain in the worst case partial band jammer of the proposed waveform are 2.5dB and 52dB respectively and the anti-jamming capacity improvement of DSM transponder is maximum 2dB.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.410-417
• /
• 2012

One of the premier mechanisms used in extracting unobserved signals from observed mixtures in signal processing is employing a blind source separation (BSS) algorithm. Orthogonal frequency division multiplexing (OFDM) techniques are playing a prominent role in the sphere of multicarrier communication. A set of remedial solutions taken to mitigate deteriorative effects caused within the air interface of OFDM transmission with aid of BSS schemes is presented. Four energy functions are used in deriving the filter coefficients. Energy criterion functions to be optimized and the performance is justified. These functions together with iterative fixed point rule for receive signal are used in determining the filter coefficients. Time correlation properties of the channel are taken advantage for BSS. It is tried to remove colored noise and jamming components from themixture at the receiver. Themethod is tested in a slow fading channel with a receiver containing equal gain combining to treat the channel state information values. The importance is that, these are quite low computational complexity mechanisms.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.75-77
• /
• 2005

When measuring impedance of electronic component and so on, even the small size can reject the interference to shielding object. But, the interference through human body is grown when measuring bioimpedance without establishing shield specially. Consequently, when measuring bioimpedance in this paper, it proposed impedance measurement method to take advantage of spread spectrum technology, so that can reject the interference without establishing shield specially. Spread spectrum impedance measurement method to propose in this paper can reject the interference signal that occurring from medical instruments in the human body, the interference signal that is flowed in from surrounding environment when measuring impedance. It improved SJR(signal to jamming ratio) about 22dB than conventional method that actually realize and experiment spread spectrum impedance measurement method.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.125-129
• /
• 2020

In this paper, Zero velocity UPdaTe (ZUPT) is implemented on the navigation system of Remotely Piloted Aircraft for GNSS denied environment. RPA's navigation system suffers from lack or loss of satellite signal while maintenance or ground test inside a hangar. Although some of the hangars install GPS repeaters for indoor tests, the anti-jamming equipment with array antenna blocks the repeater signal regarding them as hostile jamming signal. With ZUPT, an aircraft navigation system can be tested free from the divergence of navigation solution without line-of-sight satellites. The designed ZUPT aided centralized Kalman Filter is implemented on the Embedded GPS&INS and simulated with Captive Flight Test data. The simulation result shows stable navigation solution without GNSS updates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1216-1227
• /
• 2013

GNSS(Global Navigation Satellite System) is now being widely used in both civilian and military applications where accurate positioning and timing information are required and it is considered as a representative convergence technique in IT-Military application techniques. However, GNSS has low sensitivity level of GNSS receivers and is vulnerable to jamming signal, since the signals come from the satellite located at approximately 20,000 Km above the earth. The studies for the anti-jamming techniques in military applications have been passively performed in the domestic, because the information related GNSS are dependent on the countries that have GNSS. In this paper, we show the effect of jammer ERP by analyzing the link budget of GPS J/S power as a function of distance between jammer and receiver. Also, we categorize the anti-jamming techniques based on the functional block diagram of GNSS receiver structure and analyze the recent anti-jamming GNSS products and their technologies developed in domestic and foreign countries.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.988-995
• /
• 2019

In this paper, we propose the Tile Based Frequency Hopping - Chirp Spread Spectrum(TBFH-CSS) technique, which has excellent Low Probability of Intercept(LPI)/Anti-Jamming(AJ) performance. Conventional Frequency Hopping - Chirp Spread Spectrum(FH-CSS) technique uses only single chirp signal, that makes the follower jammer easy to find and jam. However, proposed TBFH-CSS uses various kind of chirp signals which are generated according to the structure of basis tile, it is composed the basis time unit and the basis bandwidth unit. The TBFH-CSS signal has variety signal period and signal bandwidth. Therefore, the follower jammer hard to find and difficult to jam the TBFH-CSS signal. We analysis the LPI/AJ performance of the TBFH-CSS technique when the follow jamming attack exist and compared with the performance of the conventional FH-CSS technique. From the analysis, we can see the proposed TBFH-CSS technique has better LPI/AJ performance than conventional technique.