• 한국정보통신학회논문지
• /
• 제9권5호
• /
• pp.905-911
• /
• 2005

본 논문은 제한적인 피드백을 이용하는 OFDM 시스템에서 용량 극대화를 위한 효율적인 적응 부 반송파 선택 방식을 제안한다. 제안하는 방식에서는 데이터 전송에 사용될 부 반송파들과 각 부 반송파에 적용될 변조 및 코딩 방식들이 수신기에서 결정되고, 제한적인 피드백을 통해 송신기로 전달된다. 본 연구에서는 채널 환경에 따라 적절한 수의 높은 신호 대 잡음 비를 갖는 부 반송파들을 선택함으로써 용량이 극대화됨을 이론적으로 유도한다. 또한, 낮은 복잡도로 최적의 부 반송파 집합을 선택하기 위한 정렬 방식을 사용하는 적응 부 반송파 선택 알고리즘을 제안한다. 시뮬레이션 결과는 제안된 적응 부 반송파 선택 방식이 제한된 feedback 정보량만으로 water-filling 방식에 의한 부 반송파 선택 방식이나 water-filling 전력 할당에 의한 용량보다 높은 용량을 제공함을 보여준다.

• 한국주조공학회지
• /
• 제20권2호
• /
• pp.97-103
• /
• 2000

In this study, a design of experiment, Taguchi method, was applied to optimize gating system design of escalator step die casting parts. Six shape factors which affect filling sequence of melt are adopted and divided into two levels respectively. Initial feeding differences of melt which were calculated by using S/N(signal-to-noise) ratio in each condition were demonstrated with the simulation of Flow-3D software program. Variations of S/N ratio according to shape factors were obtained and the optimal condition of gating system could also be obtained. It could be found that width of gate, contact angle of gate, thickness of runner are more effective factors on the filling sequence of melt than the others in this case of escalator step die casting parts. It showed that the economical gating system and sound filling sequence of melt were obtained by using Taguchi method.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.92-97
• /
• 2012

Injection mold is a manufacturing process used to produce parts of complicated shape at a low cost. Many factors affect the quality of injection molded part during injection molding process. A study on the optimization of injection mold is progressed by using a simulation software like Moldflow. Filling, packing and cooling phases of injection molding processes are analyzed according to the mold design considering the shrinkage of molded part, the degree of filling rate and the wearing of a mold. Taguchi method is applied to analyze the significance of processing parameter and the dynamic characteristics according to the variation of processing parameters. From the results, the mold temperature and packing pressure influenced the shrinkage of injection molded part.

• Journal of Radiation Protection and Research
• /
• 제47권3호
• /
• pp.134-142
• /
• 2022

Background: This study investigated the characteristics of optically stimulated luminescence dosimeters (OSLDs) with fully filled deep electron/hole traps in the kV energy ranges. Materials and Methods: The experimental group consisted of InLight nanoDots, whose deep electron/hole traps were fully filled with 5 kGy pre-irradiation (OSLD_exp), whereas the non-pre-irradiated OSLDs were arranged as a control group (OSLD_cont). Absorbed doses for 75, 80, 85, 90, 95, 100, and 105 kVp with 200 mA and 40 ms were measured and defined as the unit doses for each energy value. A bleaching device equipped with a 520-nm long-pass filter was used, and the strong beam mode was used to read out signal counts. The characteristics were investigated in terms of fading, dose sensitivities according to the accumulated doses, and dose linearity. Results and Discussion: In OSLD_exp, the average normalized counts (sensitivities) were 12.7%, 14.0%, 15.0%, 10.2%, 18.0%, 17.9%, and 17.3% higher compared with those in OSLD_cont for 75, 80, 90, 95, 100, and 105 kVp, respectively. The dose accumulation and bleaching time did not significantly alter the sensitivity, regardless of the filling of deep traps for all radiation qualities. Both OSLD_exp and OSLD_cont exhibited good linearity, by showing coefficients determination (R²) > 0.99. The OSL sensitivities can be increased by filling of deep electron/hole traps in the energy ranges between 75 and 105 kVp, and they exhibited no significant variations according to the bleaching time.

• Korean Journal of Radiology
• /
• 제2권3호
• /
• pp.132-137
• /
• 2001

Objective: The aim of our study was to describe and compare the radiologic findings of esophageal leiomyomas. Materials and Methods: The chest radiographic (n = 12), esophagographic (n = 12), CT (n = 12), and MR (n = 1) findings of surgically proven esophageal leiomyomas in 12 consecutive patients [ten men and two women aged 34 - 47 (mean, 39) years] were retrospectively reviewed. Results: The tumors, surgical specimens of which ranged from 9 to 90 mm in diameter, were located in the upper (n = 1), middle (n = 5), or lower esophagus (n = 6). In ten of the 12 patients, chest radiography revealed the tumors as mediastinal masses. Esophagography showed them as eccentric, smoothly elevated filling defects in 11 patients and a multilobulated encircling filling defect in one. In 11 of the 12 patients, enhanced CT scans revealed a smooth (n = 9) or lobulated (n = 2) tumor margin, and attenuation was homogeneously low (n = 7) or iso (n = 4). In one patient, the tumor signal seen on T2-weighted MR images was slightly high. Conclusion: Esophageal leiomyomas, located mainly in the middle or distal esophagus, are consistently shown by esophagography to be mainly eccentrically elevated filling defects and at CT, lesions showing homogeneous low or isoattenuation are demonstrated.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5299-5304
• /
• 2012

인체는 공기, 지방, 근육, 뼈, 혈관과 같이 서로 다른 조직으로 구성되어 있어 각 조직간 자화율 차이로 인해 자장의 불균일이 항상 발생하여 신호가 감소한다. 이에 본 연구에서는 서로 다른 조직으로 구성된 인체의 신호감소를 해결하기 위하여 인체의 조직밀도와 유사한 실리콘을 이용하여 공기와 맞닿은 굴곡진 부분에 보상함으로써 자기공명영상의 신호를 높이고자 하였다. 특별한 증상이 없는 성인 8명으로 대상으로 하였으며, 인체 중 굴곡이 많고 구조가 복잡해 신호감소가 많이 발생하는 발을 설정하였다. 영상은 종족궁의 가운데부터 5개의 말절골을 포함하여 얻었으며, 중족골 및 족지골을 연장한 선에 평행하게 30절편을 얻었다. 측정은 실리콘의 적용 전 후 뼈와 연부조직의 SNR을 비교하였으며, 대응표본 T검정을 이용하여 통계분석 하였다. 연구결과 뼈와 연부조직의 T1, T2 강조영상 모두 실리콘 적용 후가 적용 전에 비해 SNR이 월등히 높게 나왔으며 유의한 양의 상관관계로 증가하였다. 결론적으로 본 연구는 체적소에 영향을 주지 않으면서 코일내 인체의 부피를 늘린 획기적인 개선 방법으로, 본질적 문제인 체적소의 부피나 균일성 저하를 해결하여 SNR을 높일 수 있었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권5호
• /
• pp.691-708
• /
• 2010

An important issue of supporting multi-users with diverse quality-of-service (QoS) requirements over wireless networks is how to optimize the systematic scheduling by intelligently utilizing the available network resource while, at the same time, to meet each communication service QoS requirement. In this work, we study the problem of a variety of communication services over multi-media heterogeneous cognitive OFDM system. We first divide the communication services into two parts. Multimedia applications such as broadband voice transmission and real-time video streaming are very delay-sensitive (DS) and need guaranteed throughput. On the other side, services like file transmission and email service are relatively delay tolerant (DT) so varying-rate transmission is acceptable. Then, we formulate the scheduling as a convex optimization problem, and propose low complexity distributed solutions by jointly considering channel assignment, bit allocation, and power allocation. Unlike prior works that do not care computational complexity. Furthermore, we propose the FAASA (Fairness Assured Adaptive Sub-carrier Allocation) algorithm for both DS and DT users, which is a dynamic sub-carrier allocation algorithm in order to maximize throughput while taking into account fairness. We provide extensive simulation results which demonstrate the effectiveness of our proposed schemes.

• Transactions on Electrical and Electronic Materials
• /
• 제16권6호
• /
• pp.312-316
• /
• 2015

Through silicon via (TSV) technology holds the promise of chip-to-chip or chip-to-package interconnections for higher performance with reduced signal delay and power consumption. It includes high aspect ratio silicon etching, insulation liner deposition, and seamless metal filling. The desired etch profile should be straightforward, but high aspect ratio silicon etching is still a challenge. In this paper, we investigate the use of etch hard mask for finer TSVs etching to have clear definition of etched via pattern. Conventionally employed photoresist methods were initially evaluated as reference processes, and oxide and metal hard mask were investigated. We admit that pure metal mask is rarely employed in industry, but the etch result of metal mask support why hard mask are more realistic for finer TSV etching than conventional photoresist and oxide mask.

• 소성∙가공
• /
• 제20권1호
• /
• pp.73-78
• /
• 2011

The flashing reduces the part quality and the productivity of the molding process. We developed a contact pressure sensor to detect the flashing immediately. The performance of the sensor was analyzed in a simple 2D simulation. The sensor was applied to an automotive bumper mold with cavity pressure sensors. It showed sensitive output signal for the mold response by the cavity pressure change. It was confirmed that the flashing at the gate area occurred in the filling stage by the pressure increase due to growth of the melt flow length. The sensor output was correlated with the cavity pressure sensor output.

• 센서학회지
• /
• 제6권3호
• /
• pp.172-179
• /
• 1997

간섭형 광섬유 센서의 경우 소자의 구성만 적절히 바꾸어 다른 종류의 측정에도 사용될 수 있다는 점에 착안하여 여러 종류의 센서를 동시에 신호처리할 수 있는 원격 다중화 광섬유 센서 시스템을 구현하였다. 구현된 센서 시스템의 신호처리는 간단한 광학 구성으로 원격 다중화 측정이 가능하도록 광섬유 Fabry-Perot 간섭형 센서배열을 가정하여 피측정량의 변화에 의한 간섭 무늬의 수만 카운트하는 디지털 신호처리로 구성되었다. 광섬유의 광학 효과에 대한 데이터를 종합함으로써 센서 시스템에 부착할 센서를 구현하기 위해 적합한 광학효과를 선택하는 기준을 제시하였으며, 한 예로서 반경 4.3 cm의 원형 다이아프램 중앙에 광섬유 Fabry-Perot 간섭계를 부착하여 광섬유의 스트레인 광학 효과를 이용하게 구성한 압력센서 1개를 센서 시스템에 연결하여 간섭형 광섬유 압력 센서 시스템을 구성하였다. 압력센서의 동작을 수조실험에서 확인함으로써 압력의 원격 측정이 가능함을 보였으며, 수조 실험의 길과 2 m의 측정범위에서 오차는 ${\pm}3.6\;cm$이내인 것으로 나타났다.