• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.162-175
• /
• 2010

Currently, geographical information is interpreted and adopted in a wide range of context, and used for meeting diverse demands, such as, battlefield, traffic management, or public safety. With such an explosive increase of location-based applications, a considerable amount of research on the localization technique has been carried out. Among them, RSS (Received Signal Strength)-based approach is used especially for the indoor localization due to intrinsic limitations of the indoor environment. In this paper, we perform theoretical and empirical studies on enhancing the accuracy of the RSS-based localization on the IEEE 802.15.4 network. To this end, we set up an indoor testbed and implement a localization system on it. In addition to the theoretical analysis of the localization algorithm that we used, an empirical analysis on the effect of the factors which affect the accuracy of a localization system is carried out. Finally, we suggest some critical guidelines that should be considered for building a highly accurate localization system.

• Korean Journal of Agricultural Science
• /
• v.38 no.4
• /
• pp.747-752
• /
• 2011

Wireless technology has enabled farmers monitor and control protected production environment more efficiently. Utilization of USN (Ubiquitous Sensor Network) devices also brought benefits due to reduced wiring and central data handling requirements. However, wireless communication loses signal under unfavorable conditions (e.g., blocked signal path, low signal intensity). In this paper, performance of commercial wireless communication devices were evaluated for application to protected crop production. Two different models of wireless communication devices were tested. Sensors used in the study were weather units installed outside and top of a greenhouse (wind velocity and direction, precipitation, temperature and humidity), inside ambient condition units (temperature, humidity, $CO_2$, and light intensity), and irrigation status units (irrigation flow and pressure, and soil water content). Performance of wireless communication was evaluated with and without crop. For a 2.4 GHz device, communication distance was decreased by about 10% when crops were present between the transmitting and receiving antennas installed on the ground, and the best performance was obtained when the antennas were installed 2 m above the crop canopy. When tested in a greenhouse, center of a greenhouse was chosen as the location of receiving antenna. The results would provide information useful for implementation of wireless environment monitoring system for protected crop production using USN devices.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.134-142
• /
• 2016

In this paper, a method synthesizing speech signal using the 40 kHz ultrasonic signals reflected from the articulatory muscles was introduced and performance was evaluated. When the ultrasound signals are radiated to articulating face, the Doppler effects caused by movements of lips, jaw, and chin observed. The signals that have different frequencies from that of the transmitted signals are found in the received signals. These ADS (Acoustic-Doppler Signals) were used for estimating of the speech parameters in this study. Prior to synthesizing speech signal, a quantitative correlation analysis between ADS and speech signals was carried out on each frequency bin. According to the results, the feasibility of the ADS-based speech synthesis was validated. ADS-to-speech transformation was achieved by the joint Gaussian mixture model-based conversion rules. The experimental results from the 5 subjects showed that filter bank energy and LPC (Linear Predictive Coefficient) cepstrum coefficients are the optimal features for ADS, and speech, respectively. In the subjective evaluation where synthesized speech signals were obtained using the excitation sources extracted from original speech signals, it was confirmed that the ADS-to-speech conversion method yielded 72.2 % average recognition rates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.155-162
• /
• 2020

In this paper, we present a radiation compensation method and experiment method for two-dimensional direction finding by elevation and azimuth angles of broadband GPS signal, and then produce experimental results. Previous studies have performed direction finding by only using the azimuth angle of the detected signal. So, the compensation table utilizes compensation data by azimuth angles only. However, the presented method in this study has compensation data by azimuth and elevation angles for two-dimensional direction finding. Because of direction finding systems and applications are diversified, recently. So, we present a two-dimensional radiation compensation method. For evaluation of the presented compensation method, we calculate the ideal phase differences on the antenna for two-dimensional direction finding and simulate phase differences using a FEKO EM simulator. Subsequently, we analyze experimental data by radiation compensation experiments using the presented compensation method in an anechoic chamber.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.2
• /
• pp.100-105
• /
• 2009

A watermarking for copyright protection of digital contents for broadcasting have to be made for a real-time system. In this paper, we propose a real-time video watermarking chip and system which is hardware based watermark embedding system of SD/HD video. Our chip is implemented by FPGA which is STRATIX device from ALTERA, and our system is implemented by GS1560A and GS1532 devices from GENNUM for HD/SD video signal processing. There was little visual artifact due to watermarking in subjective quality evaluation between the original video and the watermarked one. Embedded watermark was all extracted after a robustness test called natural video attacks such as A/D conversion and MPEG compression. Our implemented watermarking hardware system can be useful in movie production and broadcasting companies that requires real-time based copyright protection system.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.1
• /
• pp.45-51
• /
• 2004

Boiler tubes in power plants are often leaked due to various material degradations including creep and thermal fatigue damage under severe operating conditions such as high temperature and high pressure over an extended period of time. To monitor and diagnose the tubes on site and in real time, the acoustic emission (AE) technology was applied. We developed an AE leak detection system, and used it to study the variation of AE signal from the on-site tubes in response to the changes in the boiler operation condition and to detect the locations of leakage based on it. Detection of leak was performed by acquiring and evaluating the signals in separate regimes of high and low frequency signal. As a result of these studies, we found that on-line monitoring and detection of leak location for boiler tubes is possible using the developed system. Thus, the system is expected to contribute to the safe operation of power plants, and prevent economic losses due to potential leak.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.18 no.1
• /
• pp.26-32
• /
• 2007

Objective and Background: Laryngeal stroboscope is an useful equipment in evaluation of vocal cord vibration and in early detection of mucosal lesion including invasive cancer of the vocal cord. Recently Lee et al. (2006) developed portable stroboscope using voice as synchronization signal. It has been frequently impaired ability to synchronize the flashes even in normal female. Authors tried to investigate various methods including vibration pick-up, microphone, laryngeal microphone, and contact microphone for development of simple and accurate method like electroglottograph signal. The purpose of this study was to estimate wheher the vibration pick-up is available and is consistent with the signal of EGG. Subjects and Methods: Authors compared the signals between EGG and noncontact method such as voice, contact methods including vibration pick-up, laryngeal microphone, and contact microphone in normal twenty adults (male 10 and female 10). The number of peak in one cycle was compared with the number of the peak in EGG, and the percent of phase difference in the peak was compared with EGG Also, authors tried to investigate which site of vibration pick-up was most effective for synchronization of stobo flashes. Three site including anterior neck below the cricoid cartilage, thyroid ala, and suprahyoid region were analysed. Results: Among various methods for synchronization of strobo flashes, vibration pick-up was most effective method in peak detection. And anterior neck below cricoid cartilage was the most available site of the vibration pick-up. Conclusion: Authors suggest that vibration pick-up is most available and effective method for synchronization of strobo flashes.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.8
• /
• pp.577-581
• /
• 2009

Recently, various new services based on ubiquitous computing and networking have been developed. In this paper, we contrive Adaptive PIR(Pyroelectric Infrared Radiation) Detection Algorithm (APIDA), a PIR-sensor based digital signal processing algorithm, that detects the movement of an invading object by the recognition of heat change in the detection area, since the object like person or car emits heat(i.e., infrared radition), We devised APIDA as a highly reliable signal processing algorithm that increases the successful detection rate and decreases the false alarm rate in the intruding object detection. According to performance evaluation experiment, APIDA shows the successful detection rate of 90% and low false alarm in the plain area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2097-2104
• /
• 2008

Ubiquitous services are high duality and differentiated services which are provided for users by recognizing the context of users and environmental conditions actively. In this case, context-aware middleware is one of the most important technologies required to implement the ubiquitous services. In this paper, we propose a method for providing ubiquitous services in a specific user space effectively and monitoring human bio-signal sensors. That is, the design and implementation of intelligent home service middleware and monitoring human bio-signal sensor based on context awareness is discussed here. Context information from various sensors is gathered, and suitable services are inferred and provided to users by the middleware system. In our approach, user services can be modelled easily by using facts and rules, and the system can be extended easily to support various ubiquitous services other than intelligent home services also. The system can be integrated with external applications and legacy systems effectively by using various protocols such as RMI, socket and HTTP, XML and Zigbee etc. We have designed and evaluated various facts and rules for intelligent home services in real environments. Functionality evaluation with the system shows that ubiquitous services can be provided to users effectively in a home environment.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.154-159
• /
• 2019

When measuring the radiating noise of an underwater moving source, the range information between the acoustic source and the receiver is an important evaluation factor, and the measurement standards such as a receiver position, a moving source depth and a speed are set. Although there is a method of using the cross correlation as a method of finding the range of the underwater moving source, this method requires a time synchronization process. In this paper, we proposed the method to estimate the range by comparing the Doppler frequency difference of the theoretically calculated multipath signal with the Doppler frequency difference of the multipath signal estimated from the received signal. The proposed method does not require a separate time synchronization process. Simulations were performed to verify the performance, and the ranging error of the proposed method reduced by about 95 % than that of the conventional method.