• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.808-815
• /
• 1990

This paper treats with the design method for the single loop oversampled Sigma-Delta A/D converter with one delay and the digital integrator. Such an integrator was kgenerated by means of the bilinear transform of the analog integrator. The frequency spectrums of the quantizer and the decimator output signal are evaluated by FFT respectively. With the performance evaluation system, the values of SNR are obtained versus the input sinusoidal signal amplitude, frequency, the oversampling ratio, the DC-input level, the loop gain and the limitting value of the integrator. As compared with existing results, values of SNR versus the input signal amplitude and the oversampling ratio for the suggested system are about 6dB higher then previously reported results respectively. Furthermore, this approach achieves an about 60dB input dynamic range.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.1
• /
• pp.117-125
• /
• 1998

In this paper, in order to investigate the fading reduction effect of narrowband and broadband signals in an indoor multipath propagation environment, both the received narrowband signal while a vehicle unit in motion and the frequency sweeped broadband signal received by vertical polarized antenna, horizontal polarized antenna and circularly polarized antenna are analyzed. Specifically, in order to evaluate polarization diversity effect, we examined the difference of fading reduction effect between the polarization diversity reception and the space diversity reception. Using the correlation coefficient and correlation graph for the polarization diversity branches, the diversity effect is evaluated. And also, using the cumulative distribution for the received signal strength simulated by diversity reception, the diversity effect is also estimated. From the evaluation results it was found that the polarization diversity which use a circularly polarized antenna at the transmitting end and the vertical and horizontal polarized antenna branches at the receiving end is markedly excellent.

• ETRI Journal
• /
• v.38 no.2
• /
• pp.366-375
• /
• 2016

This paper describes an algorithm to suppress composite noise in a two-microphone speech enhancement system for robust hands-free speech communication. The proposed algorithm has four stages. The first stage estimates the power spectral density of the residual stationary noise, which is based on the detection of nonstationary signal-dominant time-frequency bins (TFBs) at the generalized sidelobe canceller output. Second, speech-dominant TFBs are identified among the previously detected nonstationary signal-dominant TFBs, and power spectral densities of speech and residual nonstationary noise are estimated. In the final stage, the bin-wise output signal-to-noise ratio is obtained with these power estimates and a Wiener post-filter is constructed to attenuate the residual noise. Compared to the conventional beamforming and post-filter algorithms, the proposed speech enhancement algorithm shows significant performance improvement in terms of perceptual evaluation of speech quality.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.65-70
• /
• 2020

For a wireless communication system, the angle-of-arrival (AOA) of the signal has a variety of applications. The signal AOA is estimated utilizing various antenna array structure such as Uniform Linear Array (ULA), Uniform Rectangular Array (URA), and Uniform Circular Array (UCA). In this paper, we introduce a cascade AOA estimation algorithm based on the UCA, which is consisted of CAPON and Beamspace MUSIC. CAPON is employed to estimate approximate AOA groups including multiple AOA signals and Beamspace MUSIC is employed to estimate detailed signal AOAs in the estimated AOA groups. In addition, we provide the computer simulation results for verifying and analyzing the performance of the cascade AOA estimator based on UCA.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.355-361
• /
• 2012

This paper presents an experimental study on the detection and location of nonlinear scattering source due to the presence of fatigue crack in a laboratory specimen. The proposed technique is based on a combination of nonlinear elastic wave spectroscopy(NEWS) and time reversal(TR) focusing approach. In order to focus on the nonlinear scattering position due to the fatigue crack, we employed only one transmitting transducer and one receiving transducer, taking advantage of long duration of reception signal that includes multiple linear scattering such as mode conversion and boundary reflections. NEWS technique was then used as a pre-treatment of TR for spatial focusing of reemitted second harmonic signal. The robustness of this approach was demonstrated on a cracked specimen and the nonlinear TR focusing behavior is observed on the crack interface from which the second harmonic signal was originated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.987-990
• /
• 2000

In modern manufacturing industry such as aerospace, vehicle and die/mold industry, the high hardness malarial which is remarkable in aspects of durability is effectively used. The high-speed and precision machining technology has been applied in these fields. In this study, efficient sensors in high-speed machining by observing similar tendency through comparing cutting force with AE signal, gap sensor signal and accelerometer signal are selected, and machinability of high-speed machining is experimentally evaluated. We performed a basic research for sensing system construction to monitor a machine tool and machining condition.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1720-1724
• /
• 2012

This study describes an oscillometric-based blood pressure measuring algorithm by detecting turning points of oscillation signal from digitally filtered cuff signals of an automatic sphygmomanometer. The blood pressure measuring algorithm uses a characteristic ratios method from the turning points. The accurate values of the systolic/diastolic blood presures(SBP/DBP) are calculated using the peaks in the ranges of characteristic ratios. Performances of the proposed algorithm and four automatic sphygmomanometers are compared with the mercury manometer(manual type sphygmomanometer), regarding the SBP and DBP values of manual sphygmomanometer as the reference values. The performance test showed the proposed algorithm revealed the best results in errors and a statistical analysis. Therefore this algorithm can be usable in any automatic sphygmomanometers.ssure states. This may be compromising results for subject-independent sensibility evaluation using EEG signal.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.797-802
• /
• 2008

High Speed Rail Train Control System consists of CTC, IXL and ATC. IXL and ATC perform train control and command via interchanging relevant information between a signal room and CTC. However, it is proved that IXL and ATC are attributed to train delay error since those systems are highly sensitive to trackside conditions. Especially, network error on IXL blocks transmitting signal information to adjacent signal room so that its effects give rise to system overall problems. In order to figure out the measures for which minimizing the occurrence rate of train delay error due to HSR TCS, This paper is performed analysis on communication network structure, the length of SSI network roof and SSI-TFM distance by examining and analyzing the error cases related to IXL in a network aspect.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1012-1014
• /
• 1997

This paper introduces wavelets and shows that they may be efficient and useful for the detection of general faults in power system. The wavelet transform of a signal consists in measuring the "similarity" between the signal and a set of translated and scaled versions of a "mother wavelet". The "mother wavelet" is a chosen fast decaying oscillation function. A number of mother wavelet for signal analysis have been proposed and some of them are in use in fault detection. However, the performance of fault detection depend on used mother wavelet. In the present paper a comparative evaluation of different mother wavelets for low impedance fault detection is performed. The discussion is focused in well-known mother wavelet based wavelet transform. Several families of wavelets are used to analyse transient earth fault signals in a 345kV model system as generated by EMTP.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.4
• /
• pp.118-127
• /
• 1998

In this paper, we propose a voice personality transformation method which makes one person's voice sound like another person's voice. In order to transform the voice personality, vocal tract transfer function is used as a transformation parameter. Comparing with previous methods, the proposed method can obtain high-quality transformed speech with low computational complexity. Conversion between the vocal tract transfer functions is implemented by a linear mapping based on soft clustering. In this process, mean LPC cepstrum coefficients and mean removed LPC cepstrum modeled by the low dimensional vector are used as transformation parameters. To evaluate the performance of the proposed method, mapping rules are generated from 61 Korean words uttered by two male and one female speakers. These rules are then applied to 9 sentences uttered by the same persons, and objective evaluation and subjective listening tests for the transformed speech are performed.