• Journal of Convergence for Information Technology
• /
• v.7 no.6
• /
• pp.143-151
• /
• 2017

The generalized Hough transform(GHough) can be used effectively for detecting and extracting an arbitrary-shaped 2-D model in an input image. However, the main drawbacks of the GHough are both heavy computation and an excessive storage requirement. Thus, most of the researches so far have focused on reducing both the time and space requirement of the GHough. But it is still not clear how well their improved algorithms will perform under various noise in an input image. Thus, this paper proposes a new framework that can measure the performance of the GHough quantitatively. For this purpose, we view the GHough as a detector in signal detection theory and the ROC curve will be used to specify the performance of the GHough. Finally, we show that we can evaluate the GHough under various noise conditions in an input image.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.633-643
• /
• 2003

UWB impulse radio signals have an very short duration, extremely wide bandwidth and share the same frequency spectrum with other existing systems. It was determined by the Federal Communications Commission (FCC) that UWB systems could cause interference with other systems, such as Global Positioning System (GPS) for example. Therefore, at present. the FCC has restricted the use of UWB systems to frequencies above 3.1㎓. In this paper, We evaluated performance of UWB system using proposed pulses in ［1］［2］ that are strictly limited in time to remove interference while, at the same time, contain their power distribution to a frequency band from 3.1㎓ to 10.6㎓. In particular, We evaluated the BER Performance in relation to system parameters such as pulse duration. $\delta$, the number of users. Nu. and the number of symbols, M. We found the optimal pulse duration $\delta$ through computer simulation using developed UWB pulses in ［1］［2］. It is shown that performance evaluation between the UWB communication system using these UWB pulses ［1］［2］and the Gaussian monocycle pulse in M-ary PPM and BPSK schemes. These results can be contributed to construct M-ary PPM UWB communication system in terms of multiuser parameters and pulse duration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.97-108
• /
• 2013

Recently, mobile devices were increased and there was a sharp rise in demand. To exploit the location information of each device, many researcher was studying locating systems. The favorite locating or positioning systems were a GPS using satellites and a RTLS using wireless communication between devices. If some obstacle existed nearby the target device, The system have difference of performance. The obstacles near targets were caused signal disconnection and reflection because of NLOS condition. As the result, the NLOS condition degrade the locating performance. In this paper, we propose a locating system which is cooperated two systems using information reliability estimates from LOS/NLOS condition. We developed proposed system. In addition, we performed fields test and simulation tests at various environment for performance evaluation. As the result, the test showed 97% success rate to estimate NLOS condition. Furthermore, the simulation result of our locating system was increased to 89% compared with a single system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.2
• /
• pp.161-167
• /
• 2017

This paper presents an effective PPG measurement device in a wrist watch for smart healthcare. PPG can be acquired by measuring absorption of light and PPG measurement device is classified as transmission and reflection type. Reflection type is easy to implement but vulnerable to motion artifact. Moreover, reflection type must use 2 hands at once if the device is implemeted in a wrist watch. This paper describes the implementation of robust transmission type PPG measurement device by using previous developed reflection type device. PPG sensor is clip type and can be separated from the device so that the influence of motion artifact can be reduced. The proposed device can transmit the measured signal in real-time and is useful for smart healthcare. For evaluation of the proposed device, PPG signals are compared with reflection type in the same condition. The results show that the proposed device has 20% improvement in performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1073-1080
• /
• 2011

In this paper, we propose a novel digital watermarking method by virtual optics which secures multimedia information such as images, videos and sounds. To secure the multimedia data, we use Fresnel transform which describes the diffraction phenomena of the waves. Also, this method attaches the random phase function to Fresnel transform so that original image and watermark image would be gaussian random vectors. The complex numbers of watermark by Fresnel transform are separated the real part and the imaginary part. The former is embedded in original image as a encoding key imperceptibly and the latter is used for detecting the watermark as a decoding key. This method for digital watermarking ensures that watermark can be successfully registered and extracted from the watermarked image. Further, it provides the robustness to signal processing operation and geometric distortion and proves the strong resilience against cropping attack. The performance evaluation of the experiment is carried out with PSNR, and the numerical simulation results show the efficiency of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3A
• /
• pp.188-195
• /
• 2002

The M-algorithm for decoding convolutional codes can significantly reduce the complexity of the Viterbi algorithm by tracking a fixed number of survivor paths in each level of the decoding trellis. It is an easily-implementable algorithm suited for real-time processing of high-speed data. The algorithm, however, generates a sequence of catastrophic errors when the correct path is not included in the set of survivor paths. In this paper, the performance of the M-algorithm obtained from using various decoding complexity levels, frame lengths, and code constraint lengths is presented. The performance gain is quantified when the algorithm is used in conjunction with codes of increased constraint length. In particular, it is demonstrated the gain from the increased code free distance overcompensates the loss from the correct path being excluded from the survivors, when the frame length is short to moderate. Using 64 survivor paths, the signal-to-noise ratio gain obtained by increasing the constraint length from K=7 to K=9, 11, 15 is respectively 0.6, 0.75, and 08dB, when the frame of length L=100 has the frame error rate of 0.01%.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.219-228
• /
• 2012

As the wireless Internet become more widely accessible, variety of Internet services can be used without limitation of location. However, existing mobility management methods such as MIP and PMIP of IETF requires the load of heavy protocol stack on the mobile nodes or the addition of components such as LMA and MAG. In this paper, we proposed the location management technique in the PMIPv6 and Fast Handover technique. according to the moving pattern of the node, the location management technique proposed in order to adjust the paging area dynamically. The Fast Handover technique applied MIH technology and it reduced the handover signal processing time between heterogeneous network. The location management cost in the environment which the node moves in order to evaluate this and handover delay time was calculate. The proposal technique was efficiently more evaluated than PMIPv6 with the smallest 29% and maximum 83%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.120-128
• /
• 2011

Recently, safety diagnosis of the existing structures has been emerged as important issue. In particular, systematical and precise safety diagnostics for steel structures for power substation, have been required. Steel structures for power substation are under the periodical impact loads from operations of gas insulated switchgear. These loading condition accelerates damage and aging of structure. The objective of this research is to evaluate damage of structure under periodical impact loads. To evaluate the integrity of structures as organizing mathematical models including the dynamic characteristics of structures, Frequency Domain Decomposition method was choiced and an algorism was proposed. For verifying this methods and algorism, a mathematical model is composed of the development of a variety of reverse analysis and a signal processing technology reflecting physical damage of structures. A series of analysis and test results indicatge that proposed method has a confidence for applying a filed test. Therefore, it is expected to be able to take advantage of system identification to detect damage for the maintenance and management of steel structures under periodical impact loads such as power substation.

• Journal of Broadcast Engineering
• /
• v.24 no.6
• /
• pp.1024-1034
• /
• 2019

Preference for music is determined by a variety of factors, and identifying characteristics that reflect specific factors is important for music recommendations. In this paper, we propose a method to extract the singing voice related music features reflecting various musical characteristics by using a model learned for singer identification. The model can be trained using a music source containing a background accompaniment, but it may provide degraded singer identification performance. In order to mitigate this problem, this study performs a preliminary work to separate the background accompaniment, and creates a data set composed of separated vocals by using the proven model structure that appeared in SiSEC, Signal Separation and Evaluation Campaign. Finally, we use the separated vocals to discover the singing voice related music features that reflect the singer's voice. We compare the effects of source separation against existing methods that use music source without source separation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.466-474
• /
• 2014

According to wireless network technology and mobile processors performance were improved, the small wireless mobile device such as smart phones has been widely utilized. The mobile devices can be used GPS information, thereby the services based on location information was increased. GPS was impossible to provide location information in indoor and signal shading environment, and the tracking systems based on short distance wireless communication are required infrastructure. The IEEE 802.11 based tracking system is possible estimation using APs, however the tracking device is exhausted battery power seriously. In this paper, we propose IEEE 802.11 based low-power tracking system. We reduced power consumption from channel scanning and network connection. For performance evaluation, we designed and implemented the tracking tag device, and measured power consumption of the device. As the simulation result, we confirmed that the power consumption was reduced 46% compare to the standard execution.