• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.6
• /
• pp.1179-1194
• /
• 1992

QUICKER scheme has several attractive properties. However, under highly convective conditions, it produces overshoots and possibly some oscillations on each side of steps in the dependent variable when the flow is convected at an angle oblique to the grid line. Fortunately, it is possible to modify the QUICKER scheme using non-linear and linear functional relationship. Details of the development of polynomial upwinding scheme are given in this paper, where it is seen that this non-linear scheme has also third order accuracy. This polynomial upwinding scheme is used as the basis for the SHARPER and SMARTER schemes. Another revised scheme was developed by partial modification of QUICKER scheme using CDS and UPWIND schemes(QUICKUP). These revised schemes are tested at the well known bench mark flows, Two-Dimensional Pure Convection Flows in Oblique-Step, Lid Driven Cavity Flows and Buoyancy Driven Cavity Flows. For pure convection oblique step flow test problem, QUICKUP, SMARTER and SHARPER schemes remain absolutely monotonic without overshoot and oscillation. QUICKUP scheme is more accurate than any other scheme in their relative accuracy. In high Reynolds number Lid Driven Cavity Flow, SMARTER and SHARPER schemes retain lower computational cost than QUICKER and QUICKUP schemes, but computed velocity values in the revised schemes produced less predicted values than QUICKER scheme which is strongly effected by overshoot and undershoot values. Also, in Buoyancy Driven Cavity Flow, SMARTER, SHARPER and QUICKUP schemes give acceptable results.

• Journal of Korean Physical Therapy Science
• /
• v.11 no.2
• /
• pp.18-26
• /
• 2004

The purpose of this study was to compare difference of the static and dynamic balance in normal subject and LBP subject and recognizes about postural sway. The subjects of this study included 30 normal subjects and 30 LBP subjects. By using Active balance system, the static balance was measured by unit path length, circumference area, weight bearing, stabilometry length, while the dynamic balance was measured by step evaluation. Statistically analyzed using independent t-test to search static balance and dynamic balance difference in two groups. Postural sway appeared greatly in patient group than normal group in analysis result of static balance and postural sway was big in patient group of when closed eye and normal group and patient group did show statistical significance in unit path length, circumference area. Weight support of normal group was shared equally in weight bearing rate, but weight support of patient group stewed less to pain side. Anterior step time and Task achieve time of dynamic balance were spent more in patient group than normal group. Desire to be used to useful information to lay treatment policy about set-up and action of when quantification result of valued postural balance treats low back pain patient by objective tool, in the fixture, more researches in postural estimation desire that is enforced abuzz.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.481-487
• /
• 2020

In this study, finite element analysis was performed to evaluate the track irregularity of the existing track system on urban transit according to the large-scale excavation work that is constructed adjacent to the serviced line. Based on the numerical analysis, the effect of track irregularity generated during the step-by-step construction process was analytically derived, and the stability in terms of track deformation was evaluated through comparison with related standards. As the results, in the case of track irregularity items evaluated based on the relative displacement difference at a certain distance, such as alignment and vertical irregularity, it occurred most clearly at the location where deformation of the existing structure begins, such as the end point of adjacent excavation work. On the other hand, the overall vertical and horizontal displacement of the track was the largest deformation at the center of the construction section. The vulnerable position of the deformed side of the existing structure due to adjacent excavation is analytically proven that the both of the end point section and the center of the construction can be a vulnerable position in terms of track irregularity.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.188-194
• /
• 2013

In this paper, we proposed a new method for pulmonary vessels image segmentation and refinement from pulmonary image. Proposed method consist of following five steps. First, threshold estimation is performed by polynomial regression analysis of histogram variation rate of the pulmonary image. Second, segmentation of pulmonary vessels object is performed by density-based segmentation method based on estimated threshold in first step. Third, 2D connected component labeling method is applied to segmented pulmonary vessels. The seed point of both side diaphragms is determined by eccentricity and size of component. Fourth step is diaphragm extraction by 3D region growing method at the determined seed point. Finally, noise cancelation of pulmonary vessels image is performed by 3D connected component labeling method. The experimental result is showed accurately pulmonary vessels image segmentation, the diaphragm extraction and the noise cancelation of the pulmonary vessels image.

• Journal of Digital Contents Society
• /
• v.6 no.4
• /
• pp.201-208
• /
• 2005

In high-technology digital age that change everyday fast, Web became most familiar and essential tool to public. Since creation of web, web began from the first step web that offer simple information and contents. and now, it have developed to step offer dynamic contents that various multimedia components are combined. In future, it will develop to the next generation, intelligence style Semantic Web that Meta Communication of meaning-base is possible. In this paper, we examine about concept and characteristic of Semantic web that is a point technology in next generation. Also, we studied about example and practical use in personalized contents side that is based on Semantic Meta-Communication system. Semantic web is value industry field that has infinite possibility and has necessary of a lot of studies and development yet. Therefore in digital age, we expect this paper will help for space construction of more mature communication.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.531-545
• /
• 1994

In a TV component manufacturing factory, 102 male workers aged $20{\sim}39$ years old were participated in testing for physical fitness. At the same time, worker's periodic health examination was done. Test battery for physical fitness include grip strength, trunk flexion, standing long jump, side step, single leg balance with eye close, push ups and Harvard step test. As a result of testing for physical fitness, synthetically, there is no difference between manufacturing workers and officers. By bioelectrical impedance test, it means a declining tendency to all 7 factors in the obese workers, and so, it is important for obese workers not only to promote physical fitness but also to promote health. Excluding grip strength and single leg balance with eye close, 5 fitness factors are negatively associated with degree of diastolic Blood pressure, but it is statistically not significant. And levels of sGOT & sGPT have no association with physical fitness factors.

• Journal of Pharmacopuncture
• /
• v.18 no.1
• /
• pp.27-35
• /
• 2015

Objectives: In Korea, cancer is one of the most important causes of death. Cancer patients have sought alternative methods, like complementary and alternative medicine (CAM) together with Western medicine, to treat cancer. Also, there are many kinds of providers of CAM therapy, including providers of Korean oriental medicine therapy. The purpose of this study is to identify the behaviors of Korean oriental medicine therapy and CAM therapy providers who treat cancer patients and to provide background knowledge for establishing a new policy with the management and quality control of CAM. Methods: Structured and well organized questionnaires were made, and 350 persons were surveyed concerning the providers of CAM or Korean oriental medicine. The questionnaires were collected and analyzed. Results: The questionnaires (182) were collected. The questionnaires identified a total of 73 known providers, such as medicinal professionals or other providers of CAM suppliers, 35.6% of whom had had experience with treating cancer patients (52.6% vs. 29.6%). The treatment methods were a little different: alternative therapy and nutritional therapy being preferred by medicinal professionals and mind body modulation therapy and alternative therapy being preferred by other CAM providers. Four patients (7.4%) experienced side effects, and 6 patients (12.5%) experienced legal problems. As the method for managing the therapy, CAM providers, medicinal professionals, and other CAM providers had different viewpoints. For example, some CAM providers stated that both legislation and an official education on CAM or a national examination were needed as a first step to establish the provider's qualifications and that as a second step, a license test was needed for quality control. To the contrary, medicinal professionals stated that a license test was needed before legislation. Conclusion: Adequate management and quality control of CAM providers is thought to involve both education and legislation.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.2
• /
• pp.191-199
• /
• 2007

This paper presents a closing method for a cable-stayed bridge erected by the free cantilever method to produce the initial equilibrium configuration at the final construction stage. To realize the initial equilibrium condition in cable-stayed bridge by the cantilever method, compatibility conditions for vertical displacements, rotational angles, and axial displacements at the closing section of both side girders should be satisfied. In this paper, it was shown that it can be accomplished by using some applicable loads during construction such as the pull-up force of the derrick crane, some cable tension forces, and jacking force at the pylon. The proposed method was applied to a construction stage analysis of a sample bridge to demonstrate its validity, and it was acknowledged that the tower was considerably affected by the compatibility condition for axial displacement in the closing step.

• Journal of the Korean Society for Library and Information Science
• /
• v.49 no.3
• /
• pp.233-252
• /
• 2015

The purpose of this study is to analyze inquiry tasks of textbooks in middle schools social studies under the information literacy process and find out teacher librarians' educational information service on the side of information literacy education. Results of the analysis show that middle school students who carry out the inquiry tasks of social studies should select sources, seek its' related information and create their products through writing reports or presentation. Compared with information literacy process of the "Library and Information Skills", the First step of task definition and figuring out information needs and the Third step of representation of information are being implemented. For this reason, teacher librarian could reduce social studies teachers' burden of class and promote students' inquiry activities by teaching skills of suitable materials seeking strategies for solving their task, understanding and synthesizing the information and evaluating their process and result. Therefore, it is necessary to activate collaborative teaching between the teacher librarian and the social studies teacher based on the information literacy.

• Membrane and Water Treatment
• /
• v.8 no.2
• /
• pp.113-123
• /
• 2017

This study investigated effects of physical and chemical cleaning methods on the initial flux recovery of fouled membrane in membrane distillation process. A laboratory scale direct contact membrane distillation (DCMD) experiment was performed to treat digested livestock wastewater with 3.89 mg/L suspended solids, 874.7 mg/L COD, 543.7 mg/L nitrogen, 15.6 mg/L total phosphorus, and pH of 8.6. A hydrophobic PVDF membrane with an average pore size of $0.22{\mu}m$ and a porosity of 75 % was installed inside a direct contact type membrane distillation module. The temperature difference between feed and permeate side was maintained at $40^{\circ}C$ with the feed and permeate stream velocity of 0.18 m/s. The results showed that the permeate flux decreased from $22.1L{\cdot}m^{-2}{\cdot}hr^{-1}$ to $19.0L{\cdot}m^{-2}{\cdot}hr^{-1}$ after 75 hours of distillation. The fouled membrane was cleaned first by physical flushing and consecutively by chemicals with NaOCl and citric acid. After the physical cleaning the flux was recovered to 92 % as compared with the initial clean water flux of the virgin membrane. Then 94 % of the flux was recovered after cleaning by 2,000 ppm NaOCl for 90 minutes and finally 97 % of flux recovered after 3 % citric acid for 90 minutes. SEM-EDS and FT-IR analysis results presented that the foulants on the membrane surface were removed effectively after each cleaning step. The contact angle measurement showed that the hydrophobicity of the membrane surface was also restored gradually after each cleaning step to reach nearly the same hydrophobicity level as the virgin membrane.