• Journal of the Optical Society of Korea
• /
• 제1권1호
• /
• pp.60-64
• /
• 1997

An image processing algorithm is presented that can identify the orientation as well as the left/right side (parity) of the digitized radiographs. The orientation was found by computing the mean square deviation between the sampled gray values along the center and their best-fit linear regression relations. The parity was determined by comparing the area difference between two thresholded images of the left and the right side around the heart, which is assumed to be around the center of the image. This method was tested with 86 images with their orientations intentionally rotated. The rotation was limited to multiples of 90 degrees, as this was the way the rotation is most likely to happen in the clinical environment. We obtained positive responses for 85 out of 86 images subject to the screening.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.383-386
• /
• 1986

In this paper, ultrasonic range finding module for the self-contained robot, INHAE-1, is presented. This system is processed, using Z-80 microprocessor, a much of information on the surrounding condition in real time and is realted a sensor for many side data acqusition with a stepping motor. Also this system can obtain the more correct edge of the obstacle using the standard deviation of the least-square method. In this experiment, it gives more correct information to mobile robot of the blind guidance and improves the orientation of the robot path.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1496-1500
• /
• 2008

Less than 1 % directional error in the range of 5 meters in the green could cause a stroke or more. Although there are several reasons offsetting the direction of the golf ball, lie angle and sidespin effect are the most crucial factors of the putting game. Simple equation is conformed to the experimental results of the deviation of the directional error in all distance. Also, the experimental results of the putting robot show that there are significant side spin effects.

• East Asian mathematical journal
• /
• 제14권2호
• /
• pp.281-297
• /
• 1998

Here we establish limit theorems on one-side increments of two-parameter fractional $L\'{e}vy$ Brownian motion, via estimating upper bounds large deviation probability inequalities on the suprema of the fractional $L\'{e}vy$ Brownian motion.

• 대한치과교정학회지
• /
• 제39권5호
• /
• pp.300-309
• /
• 2009

본 연구는 Cone-beam CT의 MPR이미지상에서 하악골 평면에 대한 하악 제1대구치와 견치의 편위측과 비편위측의 높이와 각도차이 그리고 FH 평면에 대한 상악 제1대구치와 견치의 편위측과 비편위측의 높이와 각도차이를 계측함으로써 안면비대칭자에서 이부편위에 따른 편위측과 비편위측의 제1대구치와 견치의 높이와 협설측 경사도를 CBCT를 이용하여 분석하고 그 관련성을 알아보는 데 있다. 연구대상은 하악골의 이부편위를 동반한 안면비대칭 환자 50명(여자 29명, 남자 21명, 평균나이 24세 4개월)으로 하였다. 대조군으로 평균나이 25세 7개월인 20명(남자 11명, 여자 9명)을 분석하였다. 결과는 이부편위에 대해 FH 평면에 대한 상악 제1대구치의 편위측과 비편위측의 길이 및 각도 차이(편위측 - 비편위측)는 대조군에 대해 통계적으로 유의한 차이가 존재하였다 (p < 0.01). 비대칭군에서 상악 제1대구치 각도는 편위측이 비편위측보다 평균 $8.62\;{\pm}\;5.95^{\circ}$ 컸다 (p < 0.01). 상악 견치의 경우에도 편위측과 비편위측의 각도차이가 평균 $4.48\;{\pm}\;5.05^{\circ}$로 통계적으로 유의한 차이가 존재하였다 (p < 0.01). 하악골 평면에 대한 하악 제1대구치의 수직 길이와 각도는 편위측과 비편위측에서 통계적으로 유의할 만한 차이가 존재하였다 (p < 0.01). 각도의 차이는 평균 $-11.92\;{\pm}\;5.79^{\circ}$로 나타났다. 이부편위에 대한 상하악 제1대구치와 견치의 수직거리 및 각도의 Pearson 상관분석 및 회귀분석 결과, FH 평면에 대한 상악 제1대구치의 편위측과 비편위측의 각도차이(${\Delta\angle}UM6$-FH plane (dev.-ndev.))는 통계적으로 유의한 양의 상관관계를 나타내었고, 하악골 평면에 대한 하악 제1대구치의 편위측과 비편위측의 각도차이(${\Delta\angle}LM6$-Mn plane (dev.-ndev.))는 통계적으로 유의한 음의 상관관계를 나타내었다. 이상의 결과에서 이부편위를 동반한 하악골 비대칭이 존재하는 경우, 이부가 편위되는 방향으로 상하악 제1대구치의 치아장축의 각도가 변화되는 것으로 나타났다.

• 한국운동역학회지
• /
• 제25권4호
• /
• pp.423-429
• /
• 2015

Objective : The purpose of this study was to investigate the effects of a body alignment correction program on asymmetrically developed squash players. Method : 30 experienced squash players who showed asymmetric body development, after evaluation of moire topography contour line shape, were involved in the experiment. All of them were right-handed and had more than five years of experience playing squash. Variables of body composition, moire topography and EMG were statistically compared between pre- and post- application of the 12-week body alignment correction program. The program consisted of 10-minute, left-handed forehand and backhand drive movements and 36 minutes performing 12 different yoga postures. Results : First, the body alignment correction program showed significant effects on the total weight, body fat percentage, and body mass index of the participants. Second, a decrease of right side inclined angles and an increase of left side inclined angles might result in a higher left-right symmetry rate and a better left-right balance; however the data was not statistically significant. Third, the EMG left-right deviation of erector spinae and latissimus decreased and the erector spinae muscle was thought to be more essential for vertebral movement and left-right asymmetry correction. Conclusion : A body alignment correction program, including yoga and opposite side exercises, could reduce left-right asymmetry.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.840-848
• /
• 2016

A primary-side regulation AC-DC converter operating in the PFM (Pulse Frequency Modulation) mode with a high precision output current is designed, which applies a novel inductance compensation technique to improve the precision of the output current, which reduces the bad impact of the large tolerance of the transformer primary side inductance in the same batch. In this paper, the output current is regulated by the OSC charging current, which is controlled by a CC (constant current) controller. Meanwhile, for different primary inductors, the inductance compensation module adjusts the OSC charging current finely to improve the accuracy of the output current. The operation principle and design of the CC controller and the inductance compensation module are analyzed and illustrated herein. The control chip is implemented based on a TSMC 0.35μm 5V/40V BCD process, and a 12V/1.1A prototype has been built to verify the proposed control method. The deviation of the output current is within ±3% and the variation of the output current is less than 1% when the inductances of the primary windings vary by 10%.

• 한국기계기술학회지
• /
• 제13권1호
• /
• pp.105-112
• /
• 2011

Increasing needs for light weight and high safety in modern automobiles induced the wide application of high strength steels in automotive body structures- The main difficulty in the forming of sheet metal parts with high strength steel is the large amount of springback including sidewall curl and twist in channel shaped member parts- Among these shape defects, twist occurs frequently and requires numerous reworks on the dies to compensate the shape deviation- But until now, it seems to be no effective method to reduce the twist in the forming processes- In this study, a new forming process to reduce the twist deformation during the forming of automotive structural member was suggested- This method consists of forming and restriking of embosses on the sidewall around the stretch flanging area of the part- and was applied in the forming process design of an automotive front side inner member with high strength steel- To evaluate the effectiveness of the method, springback analysis using $Pamstampa^{tm}$ was done- Through the analysis results, the suggested method was proven to be effective in twist reduction of channel shaped parts with stretch flanging area.

• Knee surgery & related research
• /
• 제30권4호
• /
• pp.275-283
• /
• 2018

Purpose: To compare the clinical outcomes between the open posterior approach and arthroscopic suture fixation for displaced posterior cruciate ligament (PCL) avulsion fractures. Methods: A literature search was performed on MEDLINE, EMBASE, and the Cochrane Library databases. The inclusion criteria were as follows: papers written in English on displaced PCL avulsion fractures, clinical trial(s) with clear description of surgical technique, adult subjects, a follow-up longer than 12 months and modified Coleman methodology score (CMS) more than 60 points. Results: Twelve studies were included with a mean CMS value of 72.4 (standard deviation, 7.6). Overall, 134 patients underwent the open posterior approach with a minimum 12-month follow-up, and 174 patients underwent arthroscopic suture fixation. At final follow-up, the range of Lysholm score was 85-100 for the open approach and 80-100 for the arthroscopic approach. Patients who were rated as normal or nearly normal in the International Knee Documentation Committee subjective knee assessment were 92%-100% for the open approach and 90%-100% for the arthroscopic approach. The range of side-to-side difference was 0-5 mm for both approaches. Conclusions: Both arthroscopic and open methods for the treatment of PCL tibial-side avulsion injuries resulted in comparably good clinical outcomes, radiological healing, and stable knees.

• 한국통신학회논문지
• /
• 제36권11C호
• /
• pp.694-701
• /
• 2011

본 논문에서는 하나의 수신기로 다중 대역 sine 위상 binary offset carrier (BOC) 신호를 이용할 수 있도록 부상관함수의 적응적 결합에 기반한 다중 대역 sine 위상 BOC 신호 동기화 기법을 제안한다. 구체적으로는 BOC 자기상관함수를 이루고 있는 다수의 부상관함수들을 생성하고, 이를 적응적으로 재결합함으로써 주변첨두가 없는 새로운 상관함수를 획득한다. 마지막으로 delay lock loop에서 사용되는 자기상관함수를 제안한 상관함수로 대체함으로써 주변첨두로 인한 false lock 문제를 해결한다. 제안한 동기화 기법은 모든 sine 위상 BOC 신호에 적용가능하며, 모의실험 결과를 통해 제안한 기법이 기존의 기법들에 비해 더 좋은 tracking error standard deviation(TESD) 성능을 가지는 것을 보인다.