Abstract
Objective: The purpose of this study was to evaluate the correlation between menton deviation and dental compensation in facial asymmetry. Methods: Tooth axis and distance of first molar and canine to the reference plane were investigated by cone-beam computerized tomography. The subjects consisted of 50 patients with asymmetric mandibles (male 21, female 29, mean age 24.3 years). Control groups were also assessed (male 11, female 9, mean age 25.6 years). Nine measurements (5 linear measurements and 4 angular measurements) were measured in order to evaluate the correlation between menton deviation and the linear and angular difference of first molar and canine in the deviated and none-deviated sides using the defined MPR images. The differences between deviated and non-deviated side, according to menton deviation, were statistically analyzed using stepwise multiple regression analysis. Results: From the result, Menton deviation was negatively correlated with mandibular first molar's angular measurement (${\Delta\angle}LM6$-Mn plane (dev.-ndev.)) and positively with maxillary fist molar's angular measurement (${\Delta\angle}UM6$-FH plane (dev.-ndev.)) (p < 0.01). Two angular measurements (${\Delta\angle}LM6$-Mn plane (dev.-ndev.), ${\Delta\angle}UM6$-FH plane (dev.-ndev.)) explained the variability in menton deviation with a significant $r^2$ value of 0.589. Conclusions: This study suggests that the tooth axis of upper and lower first molars leans towards the deviated side of Menton when there is mandibular asymmetry with Menton deviation.
본 연구는 Cone-beam CT의 MPR이미지상에서 하악골 평면에 대한 하악 제1대구치와 견치의 편위측과 비편위측의 높이와 각도차이 그리고 FH 평면에 대한 상악 제1대구치와 견치의 편위측과 비편위측의 높이와 각도차이를 계측함으로써 안면비대칭자에서 이부편위에 따른 편위측과 비편위측의 제1대구치와 견치의 높이와 협설측 경사도를 CBCT를 이용하여 분석하고 그 관련성을 알아보는 데 있다. 연구대상은 하악골의 이부편위를 동반한 안면비대칭 환자 50명(여자 29명, 남자 21명, 평균나이 24세 4개월)으로 하였다. 대조군으로 평균나이 25세 7개월인 20명(남자 11명, 여자 9명)을 분석하였다. 결과는 이부편위에 대해 FH 평면에 대한 상악 제1대구치의 편위측과 비편위측의 길이 및 각도 차이(편위측 - 비편위측)는 대조군에 대해 통계적으로 유의한 차이가 존재하였다 (p < 0.01). 비대칭군에서 상악 제1대구치 각도는 편위측이 비편위측보다 평균 $8.62\;{\pm}\;5.95^{\circ}$ 컸다 (p < 0.01). 상악 견치의 경우에도 편위측과 비편위측의 각도차이가 평균 $4.48\;{\pm}\;5.05^{\circ}$로 통계적으로 유의한 차이가 존재하였다 (p < 0.01). 하악골 평면에 대한 하악 제1대구치의 수직 길이와 각도는 편위측과 비편위측에서 통계적으로 유의할 만한 차이가 존재하였다 (p < 0.01). 각도의 차이는 평균 $-11.92\;{\pm}\;5.79^{\circ}$로 나타났다. 이부편위에 대한 상하악 제1대구치와 견치의 수직거리 및 각도의 Pearson 상관분석 및 회귀분석 결과, FH 평면에 대한 상악 제1대구치의 편위측과 비편위측의 각도차이(${\Delta\angle}UM6$-FH plane (dev.-ndev.))는 통계적으로 유의한 양의 상관관계를 나타내었고, 하악골 평면에 대한 하악 제1대구치의 편위측과 비편위측의 각도차이(${\Delta\angle}LM6$-Mn plane (dev.-ndev.))는 통계적으로 유의한 음의 상관관계를 나타내었다. 이상의 결과에서 이부편위를 동반한 하악골 비대칭이 존재하는 경우, 이부가 편위되는 방향으로 상하악 제1대구치의 치아장축의 각도가 변화되는 것으로 나타났다.