• Progress in Medical Physics
• /
• v.13 no.3
• /
• pp.114-119
• /
• 2002

A immobilizing device that is essential for correct lung and lens shielding with homogenous dose distribution in fractionated total body irradiation was developed and it's efficiency was evaluated. The main frame was made of stainless steel bar (5 cm in diameter) to withstand up to 230 cm in height and 100 kg in weight to prevent any injury even in unconsciousness condition. The saddle was designed to adjust the body weight and hight of standing patients. Chest and back supporter were made of 1 cm acryl which could fix the lung block and cassette holder. Leather and sponge pedding were used for head rest to keep patients comfortable. The device was strongly fixed by specially designed bolts on the bottom panel which was made of 1 cm stainless steel and 10 cm thick wooden board. Precise manipulation ($\pm$2 mm) was possible by upper two pulleys and side handles. Average four minutes twenty five seconds were needed for exact setting in fractionated TBI. No significant difference of lung block location on repeated verification films was confirmed and relatively homogeneous dose distribution was measured in rando phantom experiments and patient treatments ($\pm$5%). This immobilizing device was very efficient to keep correct position of patients, which is essential for better result and less complication in fractionated TBI.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.132-139
• /
• 2016

This study was carried out near the waters of Jango port, Dangjin-gun, Chungcheongnam-do by utilizing 10kHz carrier frequency, for the purpose of measurement and analysis of underwater channel environment of the Western sea. For the measurement of horizontal channel environment, the separation distance between transmitter and receiver is made differently in the range between 10m and 4000m. Meanwhile, for the measurement of vertical channel environment, transmission and receiving side ships are fixed as contacted each other and measured differently depending on their depth of submergence. In this study, the Coherence Bandwidth and the Coherence Time were estimated by analyzing the Power delay profile of the real sea based on the measured data, and analyzing the doppler frequency through frequency conversion of received tone-signal, respectively. This study is expected to become a base study in carrying out the frame design for underwater communication to improve the communication and secure the reliability of communication in future underwater channel environment.

• Journal of the Korean Geographical Society
• /
• v.29 no.2
• /
• pp.202-215
• /
• 1994

This research aims to introduce the theoretical basis of the studies of tourism resources, by review the research trends of tourism resources in the geography field. The geographical approaches to tourism resouces can be subdicided into 3 categories according to the subject. First, the classification of tourism resource types and the approach on the spatial distribution may be enumerated. This subject has been the object of the most interest and discussion to the geographers for tourism up to now. And from the viewpoint of contents, it has been developed by classifying the types of tourism resoures, which is based on the establishment of the range and standard of tourism resources and the spatial classification of types based on the distribution feature of the area. Second, the approach about cognition, preference and interpretation on the tourism resources as the background to induce tourism phenomenon and decide the tourism destination. Judging from the fact that most of this subject is starting from the behavioural study and that the right understanding and interpretation of tourism resource is the important factor to decide the preference degree of tourists, we have to have much interest about the field of tourism geoaraphy. Third, the development of tourism resources which is showing the active study recently and its influence and effect attendant upon it may be enumerated. Today, as the economic value of tourism is become important internationally, tourism resources are recognized as the important factor to induce the industrialization of tourism. And in the series of analytical studies related to it the interest has been transferred from the economic benefit analysis attendant upon tourism development including tourism resource and to the cultural, educational, environmental and psychological influence, etc. As the result of composite examination, for the geographical studies about tourism resources, the spatial scale and the contents are being subdivided and specialized. And in the side of subject and method of study, it is developing into the positive study based on the concrete data and the measuring and analytical frame.

• Journal of the Korean Geographical Society
• /
• v.29 no.2
• /
• pp.183-200
• /
• 1994

This research aims to introduce the theoretical basis of the studies of tourism resources, by review the research trends of tourism resources in the geography field. The geographical approaches to tourism resouces can be subdicided into 3 categories according to the subject. First, the classification of tourism resource types and the approach on the spatial distribution may be enumerated. This subject has been the object of the most interest and discussion to the geographers for tourism up to now. And from the viewpoint of contents, it has been developed by classifying the types of tourism resoures, which is based on the establishment of the range and standard of tourism resources and the spatial classification of types based on the distribution feature of the area. Second, the approach about cognition, preference and interpretation on the tourism resources as the background to induce tourism phenomenon and decide the tourism destination. Judging from the fact that most of this subject is starting from the behavioural study and that the right understanding and interpretation of tourism resource is the important factor to decide the preference degree of tourists, we have to have much interest about the field of tourism geoaraphy. Third, the development of tourism resources which is showing the active study recently and its influence and effect attendant upon it may be enumerated. Today, as the economic value of tourism is become important internationally, tourism resources are recognized as the important factor to induce the industrialization of tourism. And in the series of analytical studies related to it the interest has been transferred from the economic benefit analysis attendant upon tourism development including tourism resource and to the cultural, educational, environmental and psychological influence, etc. As the result of composite examination, for the geographical studies about tourism resources, the spatial scale and the contents are being subdivided and specialized. And in the side of subject and method of study, it is developing into the positive study based on the concrete data and the measuring and analytical frame.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.243-251
• /
• 2021

In this paper, we propose a measurement technique of indoor location based on markerless applicable to AR. The proposed technique has the following originality. The first is to extract feature points and use them to generate local patches to enable faster computation by learning and using only local patches that are more useful than the surroundings without learning the entire image. Second, learning is performed through deep learning using the convolution neural network structure to improve accuracy by reducing the error rate. Third, unlike the existing feature point matching technique, it enables indoor location measurement including left and right movement. Fourth, since the indoor location is newly measured every frame, errors occurring in the front side during movement are prevented from accumulating. Therefore, it has the advantage that the error between the final arrival point and the predicted indoor location does not increase even if the moving distance increases. As a result of the experiment conducted to evaluate the time required and accuracy of the measurement technique of indoor location based on markerless applicable to AR proposed in this paper, the difference between the actual indoor location and the measured indoor location is an average of 12.8cm and a maximum of 21.2cm. As measured, the indoor location measurement accuracy was better than that of the existing IEEE paper. In addition, it was determined that it was possible to measure the user's indoor location in real time by displaying the measured result at 20 frames per second.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.81-88
• /
• 2022

In the NRC (New paradigm Reinforced Concrete) beam, steel forms, main angles used as main reinforcements, and shear angles used as basic shear reinforcements are welded and assembled in the form of vierendeel truss structures in a steel factory. After the NRC truss frame is installed at the site, additional main reinforcement and shear reinforcement are distributed. In this study, the shear performance evaluation of the NRC beam was conducted through shear tests in accordance with the type of shear reinforcement of the NRC beam (shear angle, inclined shear reinforcing bar, and U-type cover bar). As a result of the test, the initial stiffness was similar before the initial cracking of each specimen, and all specimens were shear fractured.The shear reinforcements of the specimens exhibited a yielding behavior at the time of the maximum sheat force, and the shear strengths of the specimens increased as the amount of reinforcement of the shear reinforcement increased. These results show that NRC shear reinforcements exhibit shear performance corresponding to their shear strength contribution. As a result of calculating the nominal shear strengths according to KDS 14 20 22, the experimental shear strengths of the NRC beam specimens with shear reinforcement was 37~146% larger than the nominal shear strengths, so It was evaluated as a safety side.

• Journal of the Daesoon Academy of Sciences
• /
• v.25_2
• /
• pp.1-43
• /
• 2015

Daesoonjinrihoe perceives that human suffering is caused not only by mental factors but also by the cosmic principle of Mutual Overcoming more fundamentally. The relationship influenced among all things in the universe is Mutual Beneficence and Mutual Overcoming. If these relations are properly cooperated in harmony, all things will reveal their energetic existence in a balanced state, however, if one side, particularly, Mutual Overcoming becomes excessive, indeed, it will cause trouble. That is, the sentient beings that are inclined to excessive Mutual Overcoming rather than indispensable Mutual Overcoming make grievances among themselves and cumulate them. In the end, heaven and earth lose its constant Way[常道], leading the sentient beings to all kinds of agonies. However, it may be a problem if every agony is depicted with Mutual Overcoming, that is, one single fixed frame, because Mutual Overcoming has to be interpreted diversely according to the circumstances. Thus, it is not possible to explain precisely about the agony if not understanding its spectrum. This study analyzed the ways how Daesoonjinrihoe explains the aspects of reasons and solutions to a variety of agonies. In the Supreme Scripture of Daesoonjinrihoe, the reasons for agony vary: first, it is caused by Mutual Overcoming of the cosmos itself, which is irrelevant to human beings. Secondly, man can be victimized because of Mutual Overcoming caused by man. Thirdly, there is a case of a victim who is damaged due to Mutual Overcoming caused by the other. Fourthly, man can be victimized because of Mutual Overcoming caused by someone else's unintended deeds. Fifthly, there is a case of man having agony in return when he, as a perpetrator, hurt others or resolve his inappropriate desires. Sixthly, man's deed unintendedly became a sin and have agony in return. Seventhly, man can be a self-perpetrator, conceiving vain desire, obsession and grievance. Eightly, there is a case of man having agony during enforcement of the law or practice of justice. Ninthly, man needs to endure agony during self-cultivation, enacting Reordering of the Universe(天地公事), ritual practice, promotion of fortune, and test. However, it is important to make sure that the reason for agony can interact with not only one but also diverse models in real situation. These nine models are included in the category of Mutual Overcoming; but, these cannot be classified in a single term, Mutual Overcoming because much information will be hidden, only to make it difficult to explain about agony more precisely. There are some characteristic observed in the concept of agony in Daesoonjinrihoe as follows: first, reasons for agony are caused by Mutual Overcoming although Mutual Overcoming can be interpreted differently according to the circumstances. Secondly, Daesoonjinrihoe makes a positive valuation for some agony. Thirdly, the solution to overcome a agony is brought to a conclusion, that is cultivation practice of Daesoonjinrihoe. Fourthly, the experience of agony and solution in Daesoonjinrihoe sometimes lie in the unit of family beyond individual. Fifthly, in the painful situation resulted from vain desire and obsession, Daesoonjinrihoe suggests a solution called Mutual Beneficence. That is, it emphasizes not only self-control but also active practice of considering others.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.2
• /
• pp.1-8
• /
• 2010

The purpose of the study was to evaluate the influence of landscaping pavements on WBGT(Wet-Bulb Globe Temperature) of outdoor spaces that lack ventilation and shade at summer midday. The relative humidity(RH), dry-bulb temperature(DT) and globe temperature(GT) were recorded every minute from June to October 2009 at a height of 1.2m above ten experimental beds with different pavements, by a measuring system consisting of an electric humidity sensor(GHM-15), resistance temperature detector(RTD, Pt-100), standard black globe(${\phi} 150mm$) and data acquisition systems(National Instrument's Labview and Compact FieldPoint). Additionally, the surface dry-bulb temperatures also were recorded and compared. The area of each experimental bed was 1.5m(W)${\times}$2.0m(L) and ten different kinds of pavement were used including grass, grass+cubic stone, grass+porous brick, brick, stone panels, cubic stone, interlocking blocks, clay brick, naked soil, gravel and concrete. To prevent interference from ventilation, a 1.5m height cubic steel frame was established around each bed and each vertical side of the frame was covered with transparent polyethylene film. Based on the records of the hottest period from noon to 3 PM on 26 days with a peak dry-bulb temperature over $30^{\circ}C$ at natural condition, the wet-bulb temperature(WT) and WBGT were calculated and compared. The major findings were as follows: 1. The average surface DT was $40.1^{\circ}C$, which is $9^{\circ}C$ higher than that of the natural condition. The surface DT of the pavements with grass were higher than those of concrete and interlocking block. The peak DT of the surface almost every pavement rose to above $50^{\circ}C$ during the hottest time. 2. The averages of DT, WT and GT were $40.1^{\circ}C$, $27.5^{\circ}C$ and $49.1^{\circ}C$, and the peak values rose to $48.1^{\circ}C$, $45.8^{\circ}C$ and $59.5^{\circ}C$, respectively. In spite of slight differences that resulted according to pavements, no coherent differentiating factor could be found. 3. The average WBGT of grass was the highest at $34.3^{\circ}C$ while the others were similar in the range of around $33{\pm}1^{\circ}C$. Meanwhile, the peak WBGT was highest with stone panel at $47.9^{\circ}C$. Though there were some differences according to pavements, and while grass seemed to be worst in terms of WBGT, it seems difficult to say ablolutely that grass was the worst because the measurement was conducted without ventilation and shade during summer daytime hours only, which had temperatures that rose to a dangerous degree(above $45^{\circ}C$ WBGT), withering the grass during the hottest period. The average WBGT resulted also showed that the thermal environment of the pavement without ventilation and shade were at an intolerable level for humans regardless of the pavement type. In summary, the results of this study show that ventilation and shade are more important factor than pavement type in terms of outdoor thermal comfort in summer daylight hours.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.102-115
• /
• 2014

The stamped earth method is a typical ancient engineering technique which consists of in-filling wooden frame with layers of stamped earth or sand. This method has been universally used to construct earthen walls and buildings, etc. The purpose of this article is to understand the construction method and principles of the stamped earthen wall through analysis of various construction techniques of Pungnaptoseong Fortress(Earthen Fortification in Pungnap-dong). First of all, the ground was leveled and the foundations for the construction of the earthen wall were laid. The underground foundation of the earthen walls was usually constructed by digging into the ground and then in-filling this space with layers of mud clay. Occasionally wooden posts or paving stones which may have been used to reinforce the soft ground were driven in. The method of adding layers of stamped earth at an oblique angle to either side of a central wall is the most characteristic feature of Pungnaptoseong Fortress. Even though the traces of fixing posts, boards, and the hardening of earth - all signatures of the stamped earth technique - have not been identified, evidence of a wooden frame has been found. It has also been observed that this section was constructed by including layers of mud clay and organic remains such as leaves and twigs in order to strengthen the adhesiveness of the structures. The outer part of the central wall was constructed by the anti-slope stamped earth technique to protect central wall. In addition a final layer of paved stones was added to the upper part of the wall. These stone layers and the stone wall were constructed in order to prevent the loss of the earthen wall and to discharge and drain water. Meanwhile, the technique of cementing with fire was used to control damp and remove water in stamped earth. It can not be said at present that the stamped earth method has been confirmed as the typical construction method of Korean ancient earthen walls. If we make a comparative study of the evidence of the stamped earth technique at Pungnaptoseong Fortress with other archeological sites, progress will be made in the investigation of the construction method and principles of stamped earthen wall.

• Journal of Intelligence and Information Systems
• /
• v.23 no.4
• /
• pp.57-76
• /
• 2017

Recently, consumer needs are diversifying as information technologies are evolving rapidly. A lot of IT devices such as smart phones and tablet PCs are launching following the trend of information technology. While IT devices focused on the technical advance and improvement a few years ago, the situation is changed now. There is no difference in functional aspects, so companies are trying to differentiate IT devices in terms of appearance design. Consumers also consider design as being a more important factor in the decision-making of smart phones. Smart phones have become a fashion items, revealing consumers' own characteristics and personality. As the design and appearance of the smartphone become important things, it is necessary to examine consumer values from the design and appearance of IT devices. Furthermore, it is crucial to clarify the mechanisms of consumers' design evaluation and develop the design evaluation model based on the mechanism. Since the influence of design gets continuously strong, various and many studies related to design were carried out. These studies can classify three main streams. The first stream focuses on the role of design from the perspective of marketing and communication. The second one is the studies to find out an effective and appealing design from the perspective of industrial design. The last one is to examine the consumer values created by a product design, which means consumers' perception or feeling when they look and feel it. These numerous studies somewhat have dealt with consumer values, but they do not include product attributes, or do not cover the whole process and mechanism from product attributes to consumer values. In this study, we try to develop the holistic design evaluation model based on consumer values based on three-step approach from product attributes, perceived attributes, to consumer values. Product attributes means the real and physical characteristics each smart phone has. They consist of bezel, length, width, thickness, weight and curvature. Perceived attributes are derived from consumers' perception on product attributes. We consider perceived size of device, perceived size of display, perceived thickness, perceived weight, perceived bezel (top - bottom / left - right side), perceived curvature of edge, perceived curvature of back side, gap of each part, perceived gloss and perceived screen ratio. They are factorized into six clusters named as 'Size,' 'Slimness,' 'No-Frame,' 'Roundness,' 'Screen Ratio,' and 'Looseness.' We conducted qualitative research to find out consumer values, which are categorized into two: look and feel values. We identified the values named as 'Silhouette,' 'Neatness,' 'Attractiveness,' 'Polishing,' 'Innovativeness,' 'Professionalism,' 'Intellectualness,' 'Individuality,' and 'Distinctiveness' in terms of look values. Also, we identifies 'Stability,' 'Comfortableness,' 'Grip,' 'Solidity,' 'Non-fragility,' and 'Smoothness' in terms of feel values. They are factorized into five key values: 'Sleek Value,' 'Professional Value,' 'Unique Value,' 'Comfortable Value,' and 'Solid Value.' Finally, we developed the holistic design evaluation model by analyzing each relationship from product attributes, perceived attributes, to consumer values. This study has several theoretical and practical contributions. First, we found consumer values in terms of design evaluation and implicit chain relationship from the objective and physical characteristics to the subjective and mental evaluation. That is, the model explains the mechanism of design evaluation in consumer minds. Second, we suggest a general design evaluation process from product attributes, perceived attributes to consumer values. It is an adaptable methodology not only smart phone but also other IT products. Practically, this model can support the decision-making when companies initiative new product development. It can help product designers focus on their capacities with limited resources. Moreover, if its model combined with machine learning collecting consumers' purchasing data, most preferred values, sales data, etc., it will be able to evolve intelligent design decision support system.