• 한국통신학회논문지
• /
• 제37A권11호
• /
• pp.952-960
• /
• 2012

간단한 부호기를 사용하는 분산 동영상 부호화 시스템은 복호기에서 생성한 부가정보와 원 Wyner-Ziv (WZ) 프레임간의 차이를 채널부호를 이용해 정정하게 되는데 오류정정이 제대로 이루어지지 않으면 복호기에서 피드백 채널을 통해 추가 패리티 비트를 요청하게 된다. 특히 이동통신 등과 같이 제한된 환경에서 분산 동영상 부호화 시스템을 사용하기 위해서는 전송률 및 부호화 왜곡을 효율적으로 제어할 수 있어야 한다. 본 논문에서는 부호기에서 비트 전송률을 제한함으로써 통신환경에 맞도록 비트 전송률을 일정하게 제어하는 방법을 제안한다. 제안하는 방법은 전송률을 적절히 제어할 뿐 만 아니라 부호화 성능도 일정하게 유지하는 장점이 있다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.125-130
• /
• 2008

The present study numerically simulates the flow and heat transfer characteristics of rib-induced secondary flow in a cooling channel with staggered V-shaped ribs, extruded on both walls. The rib pitch-to-height ratio (p/h) varies from 2.8 to 10 with the rib-height-to-hydraulic diameter ration ($h/D_h$) of 0.07 and the Reynolds number of 50,000. Shear stress transport (SST) turbulence model is used as a turbulence model. Computational results show that complex secondary flow patterns are generated in the duct due to the snaking flow in the streamwise direction for all tested cases. In the range of p/h=5 to 10 the staggered V-shaped rib gives about 3 times higher heat transfer augmentation than the reference smooth channel with high heat transfer on both front side and the area around the leading edge of the ribs, while the former cases give about 2.5 times higher streamwise pressure drop than the latter ones. Consequently, for the thermal performances, based on the equal pumping power condition, the staggered ones give about 2 times higher values than the latter ones with more uniform heat transfer distribution.

• Journal of information and communication convergence engineering
• /
• 제8권6호
• /
• pp.655-659
• /
• 2010

In the conventional PNC scheme, the relay node requires simultaneous transmission of two source nodes with strict power control and carrier-phase matching between two received symbols. However, this pre-equalization process at source nodes is not practical in fading channels. In this letter, we propose a novel physical-layer network coding (PNC) scheme with log-likelihood ratio (LLR) conversion for fading channels, which utilizes not pre-equalizer at transmitters (source nodes) but joint detector at receiver (relay node). The proposed PNC requires only channel side information at the receiver (CSIR), which is far more practical assumption in fading channels. In addition, the proposed PNC scheme can use the conventional modulation scheme like M-QAM regardless of modulation order, while the conventional PNC scheme requires reconfiguration of modulation scheme at the source nodes for detection of the received signal at relay node. We consider the combination of the proposed PNC and channel coding, and find that the proposed PNC scheme is easily combined the linear channel codes such as turbo codes, LDPC, and convolutional codes.

• 한국통신학회논문지
• /
• 제21권10호
• /
• pp.2563-2578
• /
• 1996

In this paper, channel error characteristics are investigated to alleviate the channel error propagation problem of the digital TV transmission systems. First, error propagation problems, which are mainly caused by the inter-frame dependancy and variable length coding of the MPEG-2 baseline encoder, are intensively analyzed. Next, existing channel resilient schemes are systematically classified into two kinds of schemes; one for the encoder and the other for the decoder. By comparing the performance and implementation cost, the encoder side schemes, such as error localization, layered coding, error resilience bit stream generation techniques, are described in this paper. Also, in an effort to consider the parcticality of the real transmission situation, an efficient error detection scheme for a decoder system is proposed by employing a priori information of the bit stream syntas, checking the encoding conditions at the encoder stage, and exploiting the statistics of the image itself. Finally, subsequent error concealment technique based on the DCT coefficient recovery algorithm is adopted to evaluate the performance of the proposed error resilience technique. The computer simulation results show that the quality of the received image is significantly improved when the bit error rate is as high as 10$^{-5}$ .

• 설비공학논문집
• /
• 제29권8호
• /
• pp.401-407
• /
• 2017

The effect of different rib geometries such as V-shaped continuous (case A), parallel broken (case B), and V-shaped broken (case C) ribs on local heat transfer distributions and pressure drops in a divergent channel with $30^{\circ}$ inclined ribs on one wall or two walls was investigated for Reynolds numbers from 22,000 to 75,000. Top and bottom walls were insulated; two side walls were uniformly heated in the divergent channel. Heated walls were composed of 10 isolated coper sections and length-to-outlet hydraulic diameter ratio of 10. Rib height-to-outlet hydraulic diameter ratio was 0.1, and rib pitch-to-height ratio equaled 10. Results revealed that V-shaped continuous rib (case A) produced approximately 1.4 times higher average Nussselt number than in the parallel broken rib (case B), and V-shaped broken rib (case C) in the channel with two ribbed walls at Re = 54,000.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.17-24
• /
• 2004

Density-gradient 방법을 이용하여 게이트의 양자효과가 double-gate MOSFET의 단채널 효과에 미치는 영향을 2차원으로 분석하였다. 게이트와 sidewall 산화막 경계면에서 발생하는 2차원 양자공핍 현상에 의하여 게이트 코너에 큰 전하 다이폴이 형성되며 subthreshold 영역에서 다이폴의 크기가 증가하고 classical 결과에 비하여 전자 농도와 전압 분포가 매우 다름을 알 수 있었다. Evanescent-nude분석을 통하여 게이트의 양자효과가 소자의 단채널 효과를 증가시키며 이는 기판에서의 양자효과에 의한 영향보다 크다는 것을 확인하였다. 양자효과에 의하여 게이트 코너에 형성되는 전하 다이폴이 단채널 효과를 증가시키는 원인임을 밝혔다.

• 한국수자원학회논문집
• /
• 제39권12호
• /
• pp.1023-1030
• /
• 2006

종방향 유속의 특성을 파악하기 위해서 중심각이 $180^{\circ}$인 순환수로에서 실험을 수행하였으며, 3차원 유속장 측정은 측방 음파 도플러 유속계를 이용하였다. 기존의 종방향 유속식들의 단점들을 검토하였다. 종방향 운동 방정식에 와점성 개념을 도입하여 새로운 종방향 유속의 연직분포 식을 개발하였다. 종방향 유속의 연직분포들을 비교한 결과 잘 일치함을 보여주고 있으며, 곡선수로에서 곡률의 변화는 종방향 유속의 연직분포 변화 및 최대 유속 발생 지점에 영향을 미치는 것을 발견하였다.

• Journal of Communications and Networks
• /
• 제11권3호
• /
• pp.279-286
• /
• 2009

This paper proposes an adaptive mode switching algorithm between two strategies in multiple antenna cellular networks:A single-user mode and a multi-user mode for the broadcast channel. If full channel state information is available at the base station, it is known that a multi user transmission strategy would outperform all single-user transmission strategies. In the absence of full side information, it is unclear what the capacity achieving method is, and thus there are few criteria to decide which of the myriad possible methods performs best given a system configuration. We compare a single user transmission and a multi user transmission with linear receivers in this paper where the transmitter and the receivers have multiple antennas, and find that neither strategy dom inates the other. There is instead a transition point between the two strategies. Then, the mode switching point is determined both ana lytically and numerically for a multiple antenna cellular downlink with correlation between transmit antennas.

• 한국지열·수열에너지학회논문집
• /
• 제15권3호
• /
• pp.7-13
• /
• 2019

To improve the flow distribution at channel locations in the welded plate heat exchanger with "L"-type inflow, the flow visualization of Model 1 was carried out. Besides, the characteristics of flow distribution was investigated experimentally according to the header shape. The inlet flow rate for each channel location was increased at the side channels but decreased at the central channels. In the case of Model 2, which has a slant structure added to the basic header of Model 1, the unevenness of inlet flow increased by 23% from 0.019 to 0.023 as compared to Model 1. On the other hand, Model 3, which has a baffle structure added to Model 2, showed 0.064 unevenness in inlet flow, which was a 36% reduction one compared to Model 1. To improve the distribution at each channel in the welded plate heat exchanger with "L"-type flow, it is necessary to improve the header external shape for the guide of flow as well as the baffle structure for reduction of vortex flow.

• 유통과학연구
• /
• 제21권2호
• /
• pp.7-20
• /
• 2023

Purpose: With the unique feature of O2O, consumers are now able to check the profile of the services and products online and then consume them in offline venues or vice versa. This study provides motivation and practical implications about online-to-offline (O2O) distribution channels and investigates the relationship between economic values, service consistency and brand identity attractiveness in the O2O distribution channel. Then identify the impact of brand identity attractiveness on the performance (reputation and reuse intention). Research design, data, and methodology: Structural equation modeling (SEM) has been used to investigate the relationship between economic value and brand identity attractiveness, which affects the reputation and reuse intention of services in O2O. Results: Empirical results show the positive and significant impact of economic value and service consistency on brand identity attractiveness which results the positive and significant impact on performance (reputation and reuse intention) in O2O. Conclusion: In the O2O distribution channel, economic value is an important aspect for the attractive image and brand identity. On the other side, brand identity attractiveness is important for the bright future of O2O services, continuous growth, achieving the distinct goal, keeping good promises with customers, and a better reputation of O2O services in distribution channels.