• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.348-348
• /
• 2011

Carbon nanotube (CNT) field effect transistors and sensors use CNT as a current channel, of which the resistance varies with the gate voltage or upon molecule adsorption. Since the performance of CNT devices depends very much on the CNT/metal contact resistance, the CNT/electrode contact must be stable and the contact resistance must be small. Depending on the geometry of CNT/electrode contact, it can be categorized into the end-contact, embedded-contact (top-contact), and side-contact (bottom-contact). Because of difficulties in the sample preparation, the end-contact CNT device is seldom practiced. The embedded-contact in which CNT is embedded inside the electrode is desirable due to its rigidness and the low contact resistance. Fabrication of this structure is complicated, however, because each CNT has to be located under a high-resolution microscope and then the electrode is patterned by electron beam lithography. The side-contact is done by depositing CNT electrophoretically or by precipitating on the patterned electrode. Although this contact is fragile and the contact resistance is relatively high, the side-contact by far has been widely practiced because of its simple fabrication process. Here we introduce a simple method to embed CNT inside the electrode while taking advantage of the bottom-contact process. The idea is to utilize a eutectic material as an electrode, which melts at low temperature so that CNT is not damaged while annealing to melt the electrode to embed CNT. The lowering of CNT/Au contact resistance upon annealing at mild temperature has been reported, but the electrode in these studies did not melt and CNT laid on the surface of electrode even after annealing. In our experiment, we used a eutectic Au/Al film that melts at 250$^{\circ}C$. After depositing CNT on the electrode made of an Au/Al thin film, we annealed the sample at 250$^{\circ}C$ in air to induce eutectic melting. As a result, Au-Al alloy grains formed, under which the CNT was embedded to produce a rigid and low resistance contact. The embedded CNT contact was as strong as to tolerate the ultrasonic agitation for 90 s and the current-voltage measurement indicated that the contact resistance was lowered by a factor of 4. By performing standard fabrication process on this CNT-deposited substrate to add another pair of electrodes bridged by CNT in perpendicular direction, we could fabricate a CNT cross junction. Finally, we could conclude that the eutectic alloy electrode is valid for CNT sensors by examine the detection of Au ion which is spontaneously reduced to CNT surface. The device sustatined strong washing process and maintained its detection ability.

• Water Engineering Research
• /
• v.2 no.4
• /
• pp.243-259
• /
• 2001

Local phenomena around bridge piers and abutments are generally considered to be similar, nevertheless the presence of the incoming boundary layer on the side wall in the abutment case generates extra pressure gradients and consequently a more complex vortex pattern. In the literature, experimental data for bridge abutments are relatively scarce; in particular almost no data are available for the time evolution of the scour. In this work we present the results of several long duration (3 days longrightarrow5weeks) clear water scour laboratory tests around bridge abutments; the time evolution of the erosion process is analysed with respect to local and global characteristic values (maxima, volume, hole shape). In particular we analyse the effect of the constriction ratio b/B between the transversal obstacle dimension and the flume width: in many practical situations abutments (or piers) obstruct a significant portion of the channel, so that the average acceleration due to constriction is expected to increase the scour effects of the local acceleration around the obstacle. Measured values for maximum scour are poorly predicted by literature formulas. Scour depths are positively correlated with the constriction ratio, but increases are smaller than expected from literature indications. Experimental results show that models for bridge piers cannot be directly applied to abutments; in particular, time scales for the latter are significantly larger than for piers.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.79-84
• /
• 2004

Initial hull form of 10 G/T and 40 knots class coastal patrol boat is newly developed. The resistance performances are experimentally and numerically investigated by model test at high speed circulating water channel(CWC) and CFD technique. The effect of a fin attached at hull side and initial trim are studied together. Wave patterns are observed to make clear the relation between the resistance performance and the wave characteristics. it can be found that the initial trim plays a role to increase the resistance performance above a certain velocity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.8
• /
• pp.2626-2646
• /
• 2014

This study presents a power and Physical Resource Blocks (PRBs) joint allocation algorithm to coordinate uplink (UL) interference in the device-to-device (D2D) underlaying Long Term Evolution-Advanced (LTE-A) networks. The objective is to find a mechanism to mitigate the UL interference between the two subsystems and maximize the weighted sum throughput as well. This optimization problem is formulated as a mixed integer nonlinear programming (MINLP) which is further decomposed into PRBs assignment and transmission power allocation. Specifically, the scenario of applying imperfect channel state information (CSI) is also taken into account in our study. Analysis reveals that the proposed PRBs allocation strategy is energy efficient and it suppresses the interference not only suffered by the LTE-A system but also to the D2D users. In another side, a low-complexity technique is proposed to obtain the optimal power allocation which resides in one of at most three feasible power vectors. Simulations show that the optimal power allocation combined with the proposed PRBs assignment achieves a higher weighted sum throughput as compared to traditional algorithms even when imperfect CSI is utilized.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.2
• /
• pp.308-315
• /
• 2014

The aims of this study are to analysis about surface muscle activity of lower and upper musculus erector spinae according to walkers form. The subjects of the current step is inconvenient to use a walker and five people over the age of 65 valid samples were selected as final. All the subjects were measured in three forms. Wireless EMG muscle activity is a measure of surface measurements were measured using a system, both musculus vastus lateralis, outside the erector spinae muscle, musculus biceps femoris, gastrocnemius muscle was attached to the channel electrodes. According to the results, First, gastrocnemius muscle activity showed significant differences by type of gait. Second, the muscle activity of the erector spinae muscle walking showed significant differences by type, side grip type showed the lowest muscle activity. Consequently, the present study is the efficient use of the four-wheel walker will provide the baseline data.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.74-80
• /
• 2012

Recently at SCIS2011, Nakatsu et. al. proposed multi-round Correlation Power Analysis(CPA) on Hardware Advanced Encryption Standard(AES) to improve the performance of CPA with limited number of traces. In this paper, we propose, Multi-Round CPA to retrieve master key using CPA of 1round and 2round on Hardware DES. From the simulation result for the proposed attack method, we could extract 56-bit master key using the 300 power traces of Hardware DES in DPA contes. And it was proved that we can search more master key using multi-round CPA than using single round CPA in limited environments.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.585-591
• /
• 2020

The adaptive transmission techniques are efficient method for underwater acoustic communication to improve the system efficiency by varying transmission parameters according to channel conditions. In this paper, we construct four transmission modes with different data rates using the convolutional codes, which is freely set to size of information bits. On the receiver side, one critical component of adaptive system is to find which mode has best performance. In this paper, we proposed threshold detection algorithm to decide appropriate mode and applied turbo equalization method based on BCJR decoder in order to improve performance. We analyzed the performance of four modes based on threshold detection algorithm through the lake experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1639-1644
• /
• 2016

In this paper, we consider the performance improvement that can be obtained with interference alignment (IA) technique applied to 802.11ac based multi-BSS WiFi service. To this end, we developed a system simulator consisting of a link-level PHY simulator, based on 802.11ac specification, and multi-BSS proportional-fair scheduler. Specifically, assuming perfect channel side information and synchronization of signals from multiple APs, we used a SLNR based interference alignment algorithm proposed in [13] and compared its performance with that of multiuser beamforming based time-sharing system. The performance was evaluated in terms of average throughput per BSS and 5% worst user throughput. The results show that 70 to 100% throughput gain can be obtained in this ideal scenario.

• Journal of information and communication convergence engineering
• /
• v.14 no.1
• /
• pp.40-44
• /
• 2016

The device coupling between the stacked top/bottom field-effect transistors (FETs) in two types of monolithic 3D inverter (M3INV) with/without a metal layer in the bottom tier is investigated, and then the regime of the thickness T_ILD and dielectric constant ε_r of the inter-layer distance (ILD), the doping concentration N_d (N_a), and length L_g of the channel, and the side-wall length L_SW where the stacked FETs are coupled are studied. When N_d (N_a) < 10¹⁶ cm^-3 and L_SW < 20 nm, the threshold voltage shift of the top FET varies almost constantly by the gate voltage of the bottom FET, but when N_d (N_a) > 10¹⁶ cm^-3 or L_SW > 20 nm, the shift decreases and increases, respectively. M3INVs with T_ILD ≥ 50 nm and ε_r ≤ 3.9 can neglect the interaction between the stacked FETs, but when T_ILD or ε_r do not meet the above conditions, the interaction must be taken into consideration.

• The Korean Journal of Physiology and Pharmacology
• /
• v.8 no.5
• /
• pp.289-293
• /
• 2004

To investigate whether VacA (vacuolating toxin) produced by Helicobacter pylori Korean stain 99 induces intestinal secretion, purified VacA was added to T84 cell monolayers mounted in Ussing chambers, and electrical parameters were monitored. Mucosal addition of low pH-pretreated VacA increased short circuit current (Isc). The effect was time- and dose-dependent and saturable. The time-to-peak Isc was concentration-dependent. Chloride channel inhibitors, niflumic acid or 5-nitro-2-(3-phenylpropylamino)-benzoate (NPPB), inhibited VacA-stimulated Isc. Carbachol (CCh)-induced increase of Isc was prolonged by the addition of VacA to the mucosal side only. The effect was unaltered by the addition of niflumic acid. VacA did not show cytopathic effects. These studies indicate that VacA is a nonlethal toxin that acts in a polar manner on T84 monolayers to potentiate $Cl^-$ secretion and the response to CCh secretion without decrease in monolayer resistance. VacA may contribute to diarrhea diseases in human intestinal epithelial cells.