현재 암 환자들을 대상으로 하는 항암치료법은 나노입자, 폴리머 중합체, 지질, 리포솜 등을 치료 전달체로 이용하여 항암치료를 진행하는 방법들이 주로 활발하게 사용되고 있다. 이러한 전달체는 항암 치료제를 직접 암세포로 정확하게 표적 운반하는 정확성, 정확하게 운반한 후 선택적으로 항암 치료제를 방출해야하는 유출제어, 다른 일반 세포들을 약물로부터 안전하게 보호하는 기능 등을 동시에 가지고 있어야 하지만, 대부분 생산과정에서 많은 유해한 화학약품을 사용하며 이로 인한 독성을 유발하는 많은 사례가 빈번하게 발생하고 있다. 따라서 본 논문에서는 겸형 적혈구를 응용한 새로운 항암 전달체로서의 가능성을 타진하고 새로운 항암치료의 방법을 제시하고자 한다.
Kkonmoe relic located in Jangan-gu, Suwon-si, Gyeonggi-do Provinceis an example of the wide chronology from the Three Kingdoms Period to Joseon Dynasty. Examinations on a forged iron ax, a cast iron ax and an iron sickle excavated from this relic revealed the microstructure structure of the metal and the manufacturing technologies. Microstructure investigation was carried out with a metallurgical microscope and a Vickers hardness tester was used to measure the hardness of the micro structures. The test results show that the forged iron ax has a ferrite and pearlitestructure. It is made of low carbon steel and then carbonized to increase carbon content. After carbonization, the surface grains are reworked and the surface decarbonized. In case of the iron sickle, it is forged from low carbon steel, then carbonized and hardened, to increase overall strength. The sickle blade is carbonized and quenched after forging, resulting in afirm, solid blade. Heat treatment to remove brittleness is not applied to the cast ironartifact, which is manufactured by solidifing hypo-eutectic cast iron with a3-4% carbon content and white cast iron. All artifacts are produced from steel and subjected to a carbonization process. To increase hardness of the blade, additional heat treatment is applied.
Gompertz modeling은 고령화 사회에 접어들기 시작하며 노령인구 예측에 성공적인 결과를 보여줌으로써 최근 많은 주목을 받고 있다. 또한 항암 치료제의 독성으로 인해 발생할 수 있는 부작용을 미연에 방지하고자 보다 효과적인 치료제의 사용에 관한 의료 생체분야에서 활발한 개발이 시도되어 왔으나 전임상 및 임상실험으로의 응용이 가능한 모델링은 극히 제한적이며, 모델링의 검증을 위한 생체실험의 분석 시스템의 최적화가 힘들다는 한계가 있다. 본 논문에서는 Gompertz modeling을 응용하여 새로운 겸형적혈구의 약물유출 예측시스템을 개발하고, 여기된 광증감제의 겸형적혈구 부착을 통해 효과적인 약물유출 제어방법을 ex-vivo 실험을 통해 검증하여 최적화된 예측 시스템의 결과를 비교 분석 할 수 있었다. 따라서 이와 같이 최적화된 Gompertz modeling을 이용한 새로운 약물전달 시스템이 항암치료에 반영된다면 부작용에 기인한 환자들의 신체적 고통과 치료를 위한 경제적 부담을 경감시키는 효과를 유도하며, 나아가 항암 치료제의 정확한 전달률을 증가시켜 보다 효과적인 항암치료를 기대할 수 있다.
작업환경의 개선이 불가능한 임업에 있어서 올바른 작업자세는 불필요한 체력의 낭비 및 누적된 특정부위에서 피로로 유발되는 상해발생 예방, 체력 저하로 인한 주의력 감소로 야기되는 휴먼에러 예방 등의 직접적인 효과를 가져 올 수 있을 것으로 판단된다. 이에 본 연구는 OWAS분석기법을 이용하여 체인톱을 이용한 간벌작업, 체인톱을 이용한 피해목벌채작업, 손톱을 이용한 임내정리작업, 낫을 이용한 덩굴제거작업, 고지절단톱을 이용한 가지치기작업, 낫을 이용한 어린나무가꾸기작업에 대하여 작업자세분석을 실시하였다. 주요 작업 중, 체인톱과 낫을 이용한 작업에서 근골격계에 약간의 해를 끼침으로 가까운 시일 내에 작업자세의 교정이 필요한 수준(수준 III)의 코드비율과 근골격계에 매우 심각한 해를 끼침으로 즉각적인 작업자세의 교정을 필요로 하는 수준(수준 IV)의 코드비율이 높게 조사되었다. 체인톱을 이용한 벌목작업에서 미숙련자와 숙련자의 작업자세를 비교해 본 결과, 수준 IV의 경우 중간 수준의 숙련자가 5.1%로 14.1%의 미숙련자 보다 낮은 것으로 조사되었다.
In the model legume Medicago truncatula, two mutants, sickle and sunn, exhibit morphologically and genetically distinct hypernodulation phenotypes. However, efforts to isolate the single recessive and single semidominant genes for sickle and sunn, respectively, by map-based cloning have so far been unsuccessful, partly due to the absence of clones that enable walks from linked marker positions. To help resolve these difficulties, a new bacterial artificial chromosome (BAC) library was constructed using BamHI-digested genomic fragments. A total of 23,808 clones were collected from ligation mixtures prepared with double-size-selected high-molecular-weight DNA. The average insert size was 116 kb based on an analysis of 88 randomly selected clones using NotI digestion and pulsed-field gel electrophoresis. About 18.5% of the library clones lacked inserts. The frequency of the BAC clones carrying chloroplast or mitochondrial DNA was 0.98% and 0.03%, respectively. The library represented approximately 4.9 haploid M. truncatula genomes. Hybridization of the BAC clone filters with a $C_{0}t-l$ DNA probe revealed that approximately 37% of the clones likely carried repetitive sequence-enriched DNA. An ordered array of pooled BAC DNA was screened by polymerase chain reactions using 13 sequence-characterized molecular markers that belonged to the eight linkage groups. Except for two markers, one to five positive BAC clones were obtained per marker. Accordingly, the sickle- and sunn-linked BAC clones identified herein will be useful for the isolation of these biotechnologically important genes. The new library will also provide clones that fill the gaps between preexisting BAC contigs, facilitating the physical mapping and genome sequencing of M. truncatula.
본 연구는 경남 화훼연구소에서 개발 육성된 스프레이형 국화 18 품종들에 대한 재분화율을 각각 조사하고, 그 중에서 '무랑루즈'가 가장 우수한 재분화 능력이 있음을 확인하였다. 특히 BA($0.5mg{\cdot}L^{-1}$)와 NAA($1.0mg{\cdot}L^{-1}$)를 함유한 MS배지를 신초재분화 배지로 이용함으로써 스탠다드형 국화인 신마와 함께 스프레이형 국화인 '무랑루즈'의 잎 절편체부터 효율적으로 신초 형성을 유도하고 완전한 식물체로 재분화시킬 수 있었다. 이러한 신초재분화 조건에서 '무랑루즈'잎 절편에 아그로박테리움을 감염하고 10일 동안 함께 배양한 후에, 선발항생제 kanamycin 농도를 저농도($10mg{\cdot}L^{-1}$)에서 고농도($30mg{\cdot}L^{-1}$)로 단계적으로 선발과정을 강화함으로써 효율적인 국화 형질전환체 제작이 가능하였다. 조사한 kanamycin 저항성 식물체 모두에서 전이유전자 $AtSICKLE$가 존재함을 genomic PCR 방법으로 확인하였다. 비록, 국화에서 그 기능이 비효율적인 CaMV 35S 프로모터를 사용했기 때문에 RT-PCR로 확인한 형질전환체에서의 전이유전자 $AtSICKLE$의 발현율은 상대적으로 낮았으나, 그 발현이 상대적으로 높은 개체에선 잎의 상편생장에 의한 엽형의 변화가 나타났다. 이러한 연구의 결과는 모델 식물체에서 분리되고 연구된 많은 유전자들이 가지는 화훼작물의 분자육종학적 가치를 국화에서 대량으로 조사할 수 있는 기반을 제공 할 것으로 기대된다.
The advent of the CRISPR-Cas genome editing platform has greatly enhanced the capabilities of researchers in many areas of biology. Its use has also been turned to the development of therapies for genetic diseases and to the enhancement of cell therapies. This review describes some recent advances in these areas.
Sungseonsa Temple site in Chungju city in Chungcheongbuk-doProvince is written in "Goryeosa" as a building for Queen Sinmyeongsunseong, the mother of Gwangjong in AD 954 in Goryeo Dynasty. The museum in Chungcheong University takes charge of the excavation for 3 times from 2000 to 2002 and identified that its construction was carried out till Joseon Dynasty. Among the iron artifacts from the first excavation such as a weeding hoe, a hand knife, a lock, two nails and a plow which had conservation treatments, the sample was collected. Its micro-structure and method of manufacture were investigated. Excavation report for those artifacts has not published yet, therefore, the date of each artifacts is not clearly confirmed. The samples were collected from each part of the objects and then embedded in epoxy resin and etched with nitric acid. The examination of its microstructure is carried out under the microscope and the hardness values were measured by Vickers hardness tester. From the results, some artifacts show different manufacture method sin the each parts. The forming processes of the iron weeding hoe and the iron sickle are similar but the blade of iron weeding hoe was strengthened by carbonization whereas the blade of the iron sickle was done by quenching. The hand knife and the nails were produced through almost same methods and shows similar microstructures. The hand knife seems to be made by repeated beating and folding in low temperature resulting in fine crystallization, but the nail shows large crystallization due to processes in high temperature. Lock is made of white cast iron, that does not show any heat treatment.
Purpose: This study aimed to evaluate the profitability of four selective mechanization systems in rice cultivation. Methods: Field experiments were conducted in the farmers' field during the wet season (June to November) of 2015 in Bangladesh. Mechanization systems were applied to evaluate four different selective levels (treatment) in eleven consequent operations. Seedlings were raised in a traditional seedbed and trays for manual and mechanical transplanting, respectively. Land preparation, irrigation, fertilizer, pesticide, carrying, and threshing and cleaning operations were performed using the same method in all the experimental plots. The mechanical options in the transplanting, weeding, and harvesting operations were changed. The mechanization systems were $S_1$ = hand transplanting + hand weeding + harvesting by sickle, $S_2$ = mechanical transplanting + Bangladesh Rice Research Institute (BRRI) weeder + reaper, $S_3$ = mechanical transplanting + BRRI power weeder + reaper, and $S_4$ = mechanical transplanting + herbicide + reaper. This experiment was performed in a randomized complete block design with four replications. Power tiller, rice transplanter, BRRI weeder, BRRI power weeder, self-propelled reaper, BRRI open drum thresher, and BRRI winnower were used in the respective operations. Accordingly, the techno-economic performances of the different technologies were calculated and compared with those of the traditional system. Results: The mechanically transplanted plot produced 6-10% more yield than the hand transplanted plot because of the use of tender-aged seedlings. Mechanical transplanting reduced 61% labor and 18% cost compared to manual transplanting. The BRRI weeder, BRRI power weeder, and herbicide application reduced 74, 91, and 98% labor, respectively. The latter also saved 72, 63, and 82% cost, respectively, compared to hand weeding. Herbicide application reduced the substantial amount of labor and cost in the weeding operation. Mechanical harvesting also saved 96% labor and 72% cost compared to the traditional method of harvesting using sickle. Selective mechanization saved 15-17% input cost compared to the traditional method of rice cultivation. Conclusions: Mechanical transplanting with the safe use of herbicide and harvesting by reaper is the most cost- and labor-saving operation. The method might be the recommended set of selective mechanization for enhancing productivity.
남부지방의 재배 체계 확립을 위한 기초자료를 얻고자 vinyl 피복과 무피복재배하에서 재식밀도 차이에 따른 생육과 수량을 조사했던바 다음과 같은 결과를 얻을 수 있었다. 1. 경장, 경직경, 분지수, m$^2$당 내수, 내당립수 등의 모든 형질이 vinyl 피복구에서 우수하였으며 m$^2$당 내수는 vinyl 피복구에서나 무피복구에서나 60$\times$15cm 재식에서 가장 우수하였다. 2. 천립중과 종실수량 역시 vinyl 피복구에서 높았으며 종실수량은 vinyl 피복과 무피복 모두 60$\times$15cm 재식에서 가장 우수하였다. 3. vinyl 피복과 무피복 상태에서 재식밀도 차이에 따른 농업형질들의 분산분석에서도 유의성이 인정되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.