• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.578-580
• /
• 2000

Micromolding process에 의한 refractive microlens array를 제작한다. PDMS, UV curable acryl adhesive 등 여러 가지 polymer 재료를 시도한다. 기존의 공장에서 주로 사용되던 etched bulk silicon, electroplated metal 등의 구조물이 아닌, polymer 구조물을 mold로 사용한다. Micromolding process에 의해 제작되는 microlens의 특성은 mold의 험상에 의해 결정된다. Reflow 공정에 의해 제작된 photoresist microlens는 매우 우수한 표면 특성과 형상 대칭성을 보여주므로, microlens의 mold로서 사용하기에 적합하다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.343-348
• /
• 2007

Molecular dynamics study of thermal NIL (Nano Imprint Lithography) process is performed to examine stamp-resist interactions. A layered structure consists of Ni stamp, poly-(methylmethacrylate) thin film resist and Si substrate was constructed for isothermal ensemble simulations. Imposing confined periodicity to the layered unit-cell, sequential movement of stamp followed by NVT simulation was implemented in accordance with the real NIL process. Both vdW and electrostatic potentials were considered in all non-bond interactions and resultant interaction energy between stamp and PMMA resist was monitored during stamping and releasing procedures. As a result, the stamp-resist interaction energy shows repulsive and adhesive characteristics in indentation and release respectively and irregular atomic concentration near the patterned layer were observed. Also, the spring back and rearrangement of PMMA molecules were analyzed in releasing process.

• Molecular & Cellular Toxicology
• /
• 제2권4호
• /
• pp.279-284
• /
• 2006

This paper describes the fabrication methods of a carbon nanotube (CNT) filter and a microdialysis chip. A CNT filter can help perform dialysis on a microfluidic chip. In this study, a membrane type of a CNT filter is fabricated and located in a microfluidic chip. The filter plays a role of a dialysis membrane in a microfluidic chip. In the fabrication process of a CNT filter, individual CNTs are entangled each other by amide bonding that is catalyzed by 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The chemically treated CNTs are shaped to form a CNT filter using a PDMS film-mold and vacuum filtering. Then, the CNT filter is sandwiched between PDMS substrates, and they are bonded together using a thin layer of PDMS prepolymer as adhesive. The PDMS substrates are fabricated to have a microchannel by standard photo-lithography technique.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.199-200
• /
• 2007

UV 처리 광학 접착제를 가지고 단일 포토리소그라피 공정을 사용하여 마이크로 렌즈를 제작하였다. 먼저 유리판 위에 자외선 처리 광학 접착제를 코팅 한 후 UV 노광하고 아세톤에서 현상 후 핫플레이트에서 유리전이 온도 이상에서 열적 재흐름이 일어나도록 하여 마이크로 렌즈를 만드는데 성공하였다 이를 실제 LED 소자 위에서 마이크로 렌즈를 만들어 보고 LED의 외부 추출 효율이 높아지는지를 실험하였다. 또한 기존의 UV 처리 광학 접착제에 나노 입자을 첨가하여 굴절률을 더 높여 마이크로 렌즈를 만드는 실험을 하였다.

• 마이크로전자및패키징학회지
• /
• 제11권4호
• /
• pp.49-53
• /
• 2004

고분자 재료가 전자산업분야에서 절연재료나 접착제로 널리 사용되고 있다. 실리콘 기판위에 증착된 고분자 층에는 기판과의 열팽창계수 차이로 인해 열응력이 발생할 수 있다 고분자 층과 기판사이의 열적 성질의 차이로 인해 큰 잔류응력이 야기된다. 본 연구에서는 레이저 주사법을 이용하여 열적변형으로 인한 곡률변화를 측정한 후, 해석적 방법을 적용하여 수정된 박막 물성을 구하는 방법을 제시하고 있다.

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.222-226
• /
• 1998

$Cu_3N$ film deposited on silicon oxide substrate by r.f. reactive sputtering technique. Synthesis and properties of copper nitride film were investigated for its possible application to Cu metallization as adhesive interlayer between copper and $SiO_2. Cu_3N$ film was synthesized at the substrate temperature ranging from $100^{\circ}C$ to $200^{\circ}C$ and at nitrogen gas ratio above $X_{N2}=0.4. Cu_3N, CuN_x$, and FGM-structured $Cu/CuN_x$ films prepared in this work passed Scotch-tape test and showed improved adhesion property to silicon oxide substrate compared with Cu film. Electrical resistivity of copper nitride film had a dependency on its lattice constant and was ranged from 10-7 to 10-1 $\Omega$cm. Copper nitride film was, however, unstable when it was annealed at the temperature above $400^{\circ}C$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.170-170
• /
• 2004

박막의 접착강도를 측정하기 위하여 수직력과 수평력을 동시에 측정할 수 있는 0.1∼100 N 용량의 2축 로드셀에 기반을 둔 스크레치 테스터를 개발하였다. 반도체용 Si wafer 기판 위에 Au나 Al 등의 금속이 관은 박막으로 증착된 제품을 table에 고정시킨 후, 2축 로드셀(x, z)이 장착된 하중센서의 선단에 Diamond Tip을 장착하여 기판과 박막에 하중(z-axis)을 증가시키면서 동시에 wafer를 x축 방향으로 이동시킨다. 이런 방식으로 시료의 표면을 긁으면 박막이 벗겨져 나가 Diamond Tip이 기판에 닿을 때 서로 다른 경도차에 의해 진동이 발생하게 되고, 이 진동을 Acoustic Emission 센서에서 감지하여 Crack 발생 시점의 Load와 Stroke를 찾아내게 된다.(중략)

• 전자공학회논문지A
• /
• 제29A권9호
• /
• pp.15-19
• /
• 1992

Tungsten silicied (WSix) has been widely used for interconnection line to improve the speed and reliability of devices. It is known that WSix formed by silane reduction has poor step coverage and poor adhesion. In this research, WSix by dichlorosilane reduction showed excellent adhesion in cellophane adhesive tape test, and improved step coverage by two times. The crystal structure of the as-deposited WSix film by silane reduction was transformed from the hexagonal to the tetragonal structure during annealing treatment, while that by dichlorosilane reduction kept the stable tetragonal structure. The fluorine concentration in the WSix film by dichlorosilane was lower than that by silane.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.354-358
• /
• 2002

This paper describes the need for a ductile Fiber Reinforced Plastics (FRP) reinforcement for concrete structures. To promte the degradation of the adhesive condition at the fiber/matrix micro interface without matrix dissolution loss were carried out in salt water surrounding. The absorption properties and the bending strength were compared about GFRP rebar and steel bar.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.53.2-53.2
• /
• 2010

In this study, we focused on our specialized electrode process for Si back-contact crystalline solar cell. It is different from other well-known back-contact cell process for thermal aspect and specialized process. In general, aluminum makes ohmic contact to the Si wafer and acts as a back surface reflector. And, silver is used for low series resistance metal grid lines. Aluminum was sputtered onto back side of wafer. Next, silver is directly patterned on the wafer by screen printing. The sputtered aluminum was removed by wet etching process after rear silver electrode was formed. In this process, the silver paste must have good printability, electrical property and adhesion strength, before and after the aluminum etching process. Silver paste also needs low temperature firing characteristics to reduce the thermal budget. So it was seriously collected by the products of several company of regarding low temperature firing (below $250^{\circ}C$) and aluminum etching endurance. First of all, silver pastes for etching selectivity were selected to evaluate as low temperature firing condition, electrical properties and adhesive strength. Using the nano- and micron-sized silver paste, so called hybrid type, made low temperature firing. So we could minimize the thermal budget in metallization process. Also the adhesion property greatly depended on the composition of paste, especially added resin and inorganic additives. In this paper, we will show that the metallization process of back-contact solar cell was realized as optimized nano-paste characteristics.