• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2006년도 제31회 학술논문발표회 초록집
• /
• pp.186-186
• /
• 2006

• 한국결정성장학회지
• /
• 제13권2호
• /
• pp.79-82
• /
• 2003

ArF(193nm) 엑시머 레이저를 이용한 펄스레이저증착법(PLD)에 의해 GaN 소결체를 타겟 재료로 하여 $SiO_2$기판위에 GaN nanoparticles를 합성하였다. PLD 공정 중에는 100Pa, 50Pa, 10Pa및 1 Pa의 Ar gas 압력과 100mJ 및 200mJ의 레이저 에너지를 가하였다. 합성된 GaN nanoparticles는 XRD, SEM, TEM, XPS 및 optical absorption spectra 등에 의해 분석되었다. 합성된 GaN nanoparticles는 대체적으로 20~30nm의 입경을 갖는 균일한 분포를 하고 있었다. 또한, Ar 기체 압력이 낮아짐에 따라 합성된 GaN nanoparticles의 stoichiometry가 향상되고 optical band edge가 blueshift 경향을 나타내었다.

• Computers and Concrete
• /
• 제26권1호
• /
• pp.21-30
• /
• 2020

Buckling and post-buckling behaviors of geometrically imperfect annular sector plates made from nanoparticle reinforced composites have been investigated. Two types of nanoparticles are considered including graphene oxide powders (GOPs) and silicone oxide (SiO₂). Nanoparticles are considered to have uniform and functionally graded distributions within the matrix and the material properties are derived using Halpin-Tsai procedure. Annular sector plate is formulated based upon thin shell theory considering geometric nonlinearity and imperfectness. After solving the governing equations via Galerkin's technique, it is showed that the post-buckling curves of annular sector plates rely on the geometric imperfection, nanoparticle type, amount of nanoparticles, sector inner/outer radius and sector open angle.

• 마이크로전자및패키징학회지
• /
• 제25권4호
• /
• pp.35-40
• /
• 2018

다양한 디바이스 응용분야에 블록공중합체가 사용되기 위해, 블록공중합체의 형상을 제어하기 위한 간단하면서도 실용적인 합성방법이 필요하다. 하지만 콜로이드성의 형판을 사용하는 기존의 방식은 공정이 복합하고 비용이 많이 발생하여, 고순도의 코어-쉘 나노입자를 대량생산하기에 적합하지 않다. 본 논문에서 PS-b-PDMS 블록공중합체를 담금어닐링하여, 20 nm 이하크기를 가지는 PS가 봉입된 코어-쉘 구조의 $SiO_x$나노입자를 합성하였다. 또한, 어닐링 공정에 사용되는 헵테인과 에탄올의 혼합비율이 자기조립된 PS-b-PDMS 블록공중합체 나노입자의 형상에 어떠한 영향을 미치는지 분석하였으며, 최적의 담금어닐링 조건에서 나노입자가 worm-like구조로 변화하는 것을 확인하였다. 이러한 파우더 합성법은 다른 용매기반의 블록공중합체 합성방법에 응용이 가능할 것으로 생각되며, 새로운 가이드라인을 제공할 것으로 예상된다.

• 한국세라믹학회지
• /
• 제42권2호
• /
• pp.127-131
• /
• 2005

열처리가 단분산 구형 $SiO_2$ 나노 분말의 자기조립을 통하여 형성된 광자결정 박막의 광특성에 미치는 영향에 대하여 조사하였다. 광밴드갭에 의해 나타나는 반사율 피크는 열처리 온도가 증가함에 따라 단파장 쪽으로 이동하였고, 빛의 회절에 의해 나타나는 Fabry-Perot fringes 피크의 강도도 증가하였다. 또한, 반사율의 절대값도 $250\~300^{\circ}C$ 사이에서 열처리한 시편에서 가장 높은 값을 나타내었다. 미세구조 분석에 따르면 저온열처리를 통하여 입자크기와 결함량이 줄어들고 결정의 치밀도는 증가하였다.

• 한국분말재료학회지
• /
• 제25권5호
• /
• pp.420-425
• /
• 2018

Core-shell structured nanoparticles are garnering attention because these nanoparticles are expected to have a wide range of applications. The objective of the present study is to improve the coating efficiency of gold shell formed on the surface of silica nanoparticles for $SiO_2@Au$ core-shell structure. For the efficient coating of gold shell, we attempt an in-situ synthesis method such that the nuclei of the gold nanoparticles are generated and grown on the surface of silica nanoparticles. This method can effectively form a gold shell as compared to the conventional method of attaching gold nanoparticles to silica particles. It is considered possible to form a dense gold shell because the problems caused by electrostatic repulsion between the gold nanoparticles in the conventional method are eliminated.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.105.1-105.1
• /
• 2011

To enhance the performance of photovoltaic a-Si:H solar cells with a hybrid-type light absorbing structure of single crystal silicon nanoparticles (Si NPs) in a-Si:H matrix, single crystal Si NPs were produced by laser pyrolysis. The Si NPs were synthesized by $SiH_4$ gas decomposition using a $CO_2$ laser. The properties of Si NPs were controlled by process parameters such as $CO_2$ laser power, reactive gas pressure, and $H_2/SiH_4$ gas flows. The crystalline properties and sizes of Si NPs were analyzed by High Resolution Transmission Electron Microscopy (HRTEM). The sizes of Si NPs were controllable in the range of 5-15 nm in diameter and the effects of process parameters of laser pyrolysis were systematically investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.93-93
• /
• 2008

This paper presents the Raman scattering characteristics of poly (polycrystalline) 3C-SiC thin films deposited on AlN buffer layer by atmospheric pressure chemical vapor deposition (APCVD) using hexamethyldisilane (MHDS) and carrier gases (Ar + $H_2$).The Raman spectra of SiC films deposited on AlN layer of before and after annealings were investigated according to the growth temperature of 3C-SiC. Two strong Raman peaks, which mean that poly 3C-SiC admixed with nanoparticle graphite, were measured in them. The biaxial stress of poly 3C-SiC/AlN was calculated as 896 MPa from the Raman shifts of 3C-SiC deposited at $1180^{\circ}C$ on AlN of after annealing.

• 한국환경과학회지
• /
• 제22권1호
• /
• pp.73-81
• /
• 2013

The present work has been devoted to the catalytic reduction of $N_2O$ by $H_2$ with $Pt/SiO_2$ catalysts at very low temperatures, such as $110^{\circ}C$, and their nanoparticle sizes have been determined by using $H_2-N_2O$ titration, X-ray diffraction(XRD) and high-resolution transmission electron microscopy(HRTEM) measurements. A sample of 1.72% $Pt/SiO_2$, which had been prepared by an ion exchange method, consisted of almost atomic levels of Pt nanoparticles with 1.16 nm that are very consistent with the HRTEM measurements, while a $Pt/SiO_2$ catalyst possessing the same Pt amount via an incipient wetness technique did 13.5 nm particles as determined by the XRD measurements. These two catalysts showed a noticeable difference in the on-stream $deN_2O$ activity maintenance profiles at $110^{\circ}C$. This discrepancy was associated with the nanoparticle sizes, i.e., the $Pt/SiO_2$ catalyst with the smaller particle size was much more active for the $N_2O$ reduction. When repeated measurements of the $N_2O$ reduction with the 1.16 nm Pt catalyst at $110^{\circ}C$ were allowed, the catalyst deactivation occurred, depending somewhat on regeneration excursions.

• 통합자연과학논문집
• /
• 제5권4호
• /
• pp.211-215
• /
• 2012

Single-crystalline silicon nanowire arrays (SiNWAs) using electroless metal-assisted etchings of p-type silicon were successfully fabricated. Ag nanoparticle deposition on silicon wafers in HF solution acted as a localized micro-electrochemical redox reaction process in which both anodic and cathodic process took place simultaneously at the silicon surface to give SiNWAs. The growth effect of SiNWs was investigated by changing of etching times. The morphologies of SiNWAs were obtained by SEM observation. Well-aligned nanowire arrays perpendicular to the surface of the silicon substrate were produced. Optical characteristics of SiNWs were measured by FT-IR spectroscopy and indicated that the surface of SiNWs are terminated with hydrogen. The thicknesses and lengths of SiNWs are typically 150-250 nm and 2 to 5 microns, respectively.