• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.3
• /
• pp.234-239
• /
• 2007

This paper describes the TiW ohmic contact characteristics under the surface treatment of the polycrystalline 3C-SiC thin film grown on $SiO_2/Si(100)$ wafers by APCVD. The poly 3C-SiC surface was polished by using CMP(chemical mechanical polishing) process and then oxidized by wet-oxidation process, and finally removed SiC oxide layers. A TiW thin film as a metalization process was deposited on the surface treated poly 3C-SiC layer and was annealed through a RTA(rapid thermal annealing) process. TiW/poly 3C-SiC was investigated to get mechanical, physical, and electrical characteristics using SEM, XRD, XPS, AFM, optical microscope, I-V characteristic, and four-point probe, respectively. Contact resistivity of the surface treated 3C-SiC was measured as the lowest $1.2{\times}10^{-5}{\Omega}cm^2$ at $900^{\circ}C$ for 45 sec. Therefore, the surface treatments of poly 3C-SiC are necessary to get better contact resistance for extreme environment MEMS applications.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.3
• /
• pp.111-116
• /
• 2004

The Ni/SiC Schottky diode was fabricated with the $\alpha$-SiC thin film grown by the ICP-CVD method on a (111) Si wafer. $\alpha$-SiC film has been grown on a carbonized Si layer in which the Si surface was chemically converted to a very thin SiC layer achieved using an ICP-CVD method at $700^{\circ}C$. To reduce defects between the Si and $\alpha$-SiC, the surface of the Si wafer was slightly carbonized. The film characteristics of $\alpha$-SiC were investigated by employing TEM (Transmission Electron Microscopy) and FT-IR (Fourier Transform Infrared Spectroscopy). Sputterd Ni thin film was used as the anode metal. The boundary status of the Ni/SiC contact was investigated by AES (Auger Electron Spectroscopy) as a function of the annealing temperature. It is shown that the ohmic contact could be acquired beyond a 100$0^{\circ}C$ annealing temperature. The forward voltage drop at 100A/cm was I.0V. The breakdown voltage of the Ni/$\alpha$-SiC Schottky diode was 545 V, which is five times larger than the ideal breakdown voltage of the silicon device. As well, the dependence of barrier height on temperature was observed. The barrier height from C- V characteristics was higher than those from I-V.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.211-211
• /
• 2012

Using spin-polarized density-functional theory calculations, we find that the existence of either Peierls instability or antiferromagnetic spin ordering is sensitive to hydrogen passivation near the step. As hydrogens are covered on the terrace, the dangling bond electrons are localized at the step, leading to step-induced states. We investigate the competition between charge and spin orderings in dangling-bond (DB) wires of increasing lengths fabricated on an H-terminated vicinal Si(001) surface. We find antiferromagnetic (AF) ordering to be energetically much more favorable than charge ordering. The energy preference of AF ordering shrinks in an oscillatory way as the wire length increases. This oscillatory behavior can be interpreted in terms of quantum size effects as the DB electrons fill discrete quantum levels.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.213-213
• /
• 2012

In this study, effect of EB-PVD coated Si/HA film thickness on surface characteristics of Ti-35Nb-10Zr alloy was investigated. The Ti-35Nb-10Zr alloy was fabricated by arc melting method. The Si/HA layers were coated with 0.8 wt.% of Si in pure HA by EB-PVD method. The coating thickness was consisted with 100 - 300 nm for each group, the surface characteristics was analyzed by FE-SEM, EDS, XRD, XRF and corrosion test. The Si/HA coating layer was well deposited on the alloy surface by EB-PVD, the thickness was correlative factor with HA peaks and corrosion resistance value.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.90-93
• /
• 2004

In this work, we have used different techniques for the surface passivation: conventional thermal oxidation (CTO), rapid thermal oxidation (RTO), and plasma-enhanced chemical vapour deposition (PECVD). The surface passivation qualities of eight different single and combined double layer have been investigated both on the phosphorus non-diffused p-type FZ silicon and on phosphorus diffused emitter of 100 ${\Omega}/Sq$ and 40 ${\Omega}/Sq$. In the single layer, silicon dioxide $(SiO_2)$ passivates good on the emitter while silicon nitride (SiN) passivates better than on the non-diffused surface. In the double layers, CTO/SiN1 passivates very well both on non-diffused surface on the emitter. However, RTO/SiN1 and RTO/SiN2 stacks are more suitable for surface passivation in solar cells caused by a relatively good passivation qualities and the low optical reflection. Applying these stacks in solar cells we achieved 18.5 % and 18.8 % on 0.5 ${\Omega}$ cm FZ-Si with planar and textured front surface, respectively. The excellent open circuit voltage $(V_{oc})$ of 675.6 mV is obtained the planar cell with RTO/SiN stack.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.11
• /
• pp.1028-1032
• /
• 1995

The structure and electronic properties of the Si(100) surface is studied using the atom superposition and electron delocalization method. The energy released when the symmetric dimer surface is reconstructed to form the buckled dimer surface with p(2X2) symmetry is calculated to be 0.99 eV per dimer in the case of ideal clean surfaces. This indicates that the surface dimer buckling is intrinsic from the viewpoint of thermodynamics. The relaxation energy, when water is adsorbed on the clean symmetric dimer surface to form the buckled dimer surface, is 2.25 eV per dimer for appropriate coverages. These results show that H2O molecule could induce a reconstruction of the surface structure through adsorption. The buckling of the surface dimer is, therefore, more favorable under the existence of water vapour. This conclusion supports the recently obtained experimental observations by Chander et al.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.3
• /
• pp.9-14
• /
• 2004

In this study, Si anisotropic etching characteristics of tetramethylammonium hydroxide (TMAH)/ ammonium persulfate(AP)/isopropyl alcohol(IPA) solutions were investigated to realize the optimum structure of a diaphragm for the piezoresistive pressure sensor application. Due to its low toxicity and its high compatibility with the CMOS processing, TMAH was used as Si anisotropic etchants. The variations of Si etch rate on the etching temperature, TMAH concentration, and etching time were obtained. With increasing the etching temperature and decreasing TMAH concentrations, the Si etch rate is increased while a significant non-unifonnity exists on the etched surface because of formation of hillocks on the (100) surface. The addition of IPA to TMAH solution leads to smoother etched surfaces but, makes the Si etch rate lower. However, with the addition of AP to TMAH solution, the Si etch rate is increased and an improvement in flatness on the etching front is observed. The Si etch rate is also maximized with increasing the number of addition of AP to TMAH solution per one hour. The Si square membranes of 20${\mu}{\textrm}{m}$ thickness and l00-400${\mu}{\textrm}{m}$ one-side length were fabricated successfully by applying optimum Si etching conditions of TMAH/AP solutions.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1805-1810
• /
• 2009

The adsorptions of trimethygallium (TMG) and arsine (As$H_3$) on H/Si(100)-2x1 surface were theoretically investigated. In the case of TMG adsorption, methane loss reaction, surface methylation, hydrogen loss reaction and ring closing reaction channels were found. The mechanism of As$H_3$ adsorption on the surface was also identified. Among these, the methane loss reaction depositing –Ga(C$H_3)_2$ was found to be the major channel due to its low barrier height and the large exothermicity. The surface methylation reaction is the second most favorable channel. In contrast, arsine turned out to be less reactive on the surface, implying that Arsine surface reaction would be the rate limiting step in the overall ALD process.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.24-31
• /
• 2004

Masking effect of the nanoscratched silicon (100) surface was studied and applied to a maskless nanofabrication technique. First, the surface of the silicon (100) was machined by ductile-regime nanomachining process using the scratch option of the Nanoindenter${ \circledR}$ XP. To clarify the possibility of the nanoscratched silicon surfaces for the application to wet etching mask, the etching characteristic with a KOH solution was evaluated at room temperature. After the etching process, the convex nanostructures were made due to the masking effect of the mechanically affected layer. Moreover, the height and the width of convex structures were controlled with varying normal loads during nanoscratch.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.4
• /
• pp.92-100
• /
• 1985

New N+N/P HLE solar cells with N+ surface charge accumulated layer in the emitter region are fabricated on the N/P Si epiwafer by incorporating high fixed positive charge density (Qss) at the Si-AR layer interface. Solar cells are classified into two categories, i.e, OCI and NCI Cell depending on AR layer, SiOl and Si3 N4/sioxynitride layer respectively. The distribution of Qss in the Si-AR layer interface is examined by C-V plot. It shows that the surface charge accumulated layer is formed more effectively in the NCI cell (Qss=1.79-1.84$\times$1012cm-2) than in the OCI cell (Qss=3.03~4.40$\times$1011 cm-2). The efficiency characteristics are evaluated under the JCR halogen lamp of 100 mw/cm2. The average (maximum) conversion efficiency for active area is 15.18 (15.46)% in the OCI cell and 16.31 (17.07)% in the NCI cell.