• Journal of Chest Surgery
• /
• 제57권3호
• /
• pp.231-239
• /
• 2024

Background: Although the modified Blalock-Taussig shunt remains the mainstay method of palliation for augmenting pulmonary blood flow in various congenital heart diseases, the shunt must be carefully designed to achieve the best outcomes. This study investigated the effect of shunt configuration on pulmonary artery growth and growth discrepancy. Methods: Twenty patients with successful modified Blalock-Taussig shunt takedown were analyzed. Pulmonary artery and shunt characteristics were obtained using computed tomography scans. Differences in the baseline and follow-up diameter ratios and growth in the ipsilateral and contralateral arteries were calculated. The angle between the shunt and pulmonary artery, as well as the distance from the main pulmonary artery bifurcation, were measured. Correlations between pulmonary arteries and shunt configurations were analyzed. Results: The median interval time between shunt placement and takedown was 154.5 days (interquartile range, 113.25-276.25 days). Follow-up values of the ipsilateral-to-contralateral pulmonary artery diameter ratio showed no significant correlation with the shunt angle (ρ=0.429, p=0.126) or distance (ρ=0.110, p=0.645). The shunt angle and distance from the main pulmonary bifurcation showed no significant correlation (ρ=-0.373, p=0.189). Pulmonary artery growth was negatively correlated with shunt angle (ipsilateral, ρ=-0.565 and p=0.035; contralateral, ρ=-0.578 and p=0.030), but not with distance (ipsilateral, ρ=-0.065 and p=0.786; contralateral, ρ=-0.130 and p=0.586). Conclusion: Shunt configuration had no significant effect on growth imbalance. The angle and distance of the shunt showed no significant correlation with each other. A more vertical shunt was associated with significant pulmonary artery growth. We suggest a more vertical graft design for improved pulmonary artery growth.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.141-142
• /
• 2017

In this paper, integrated series and shunt inverter is presented to solve power quality problems in distribution line system. In this configuration consists of series inverter and shunt inverter. Series inverter acts as DVR to compensate voltage during sagging occurred and shunt inverter optimize to inject balance active power from distributed power source like PV system with Maximum Power Point Tracing (MPPT). Finally, the proposed configuration is verified through the PSiM simulation.

• Journal of Power Electronics
• /
• 제7권3호
• /
• pp.257-264
• /
• 2007

Active power filters can be cost-effective for use in practical systems with the insertion of a few passive elements in shunt or series configuration. The resulting hybrid filters can be designed to provide dominant lower order harmonic elimination and reactive power support by the passive elements so that the burden on the active filter counterpart is reduced. In this paper, the rate reduction in the shunt active filter is estimated when it is connected in parallel with suitable passive tuned harmonic filters. The active filtering system is based on an appropriate control scheme. The simulation and the experimental results of the shunt active filter, along with the estimated value of reduction in rating, show that the hybrid shunt filtering system is quite effective in compensating for the harmonics and reactive power, in addition to being cost-effective.

• 대한전자공학회논문지TC
• /
• 제43권10호
• /
• pp.90-97
• /
• 2006

본 논문에서는 cascode 구조에 shunt peaking 기술을 접목시킨 밀리미터파 광대역 amplifier를 설계 및 제작하였다. 밀리미터파 광대역 cascode amplifier의 설계 및 제작을 위해서 $0.1{\mu}m\;{\Gamma}-gate$ GaAs PHEMT와 CPW 및 passive library를 개발하였다. 제작된 PHEMT는 최대 전달 컨덕턴스는 346.3 mS/mm, 전류이득 차단 주파수 ($f_T$)는 113 GHz, 그리고 최대공진 주파수($f_{max}$)는 180 GHz의 특성을 갖고 있다. 설계된 cascode amplifier는 회로의 발진을 막기 위해서 저항과 캐패시터를 common-rate 소자의 드레인에 병렬로 연결하였다. 대역폭의 확장 및 gain의 평탄화를 위해 바이어스 단들에 short stub 및 common-source 소자와 common-gate 소자 사이에 보상 전송선로를 삽입하고 최적화하였으며, 입출력 단은 광대역 특성을 갖는 정합회로로 설계하였다. 제작된 cascode amplifier의 측정결과, cascode 구조에 shunt peaking 기술을 접목시킴으로써 대역폭을 확장 및 gain을 평탄화 시킬 수 있다는 것을 확인하였다. 3 dB 대역폭은 34.5 GHz ($19{\sim}53.5GHz$)로 광대역 특성을 얻었으며, 3 dB대역 내에서 평균 6.5 dB의 $S_{21}$ 이득 특성을 나타내었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.188-191
• /
• 2005

Taguchi method is used to determine the optimal configuration of PZT (Lead Zirconate-Titanate) patch on the host structure for improving the performance of piezoelectric shunt system. The charges generated on the surface of PZT patch are selected to be the objective function in the Taguchi method. Full three dimensional finite element models are used to simulate vibration of smart panel and to obtain the admittance of the piezoelectric shunt system. Using Taguchi method in Minitab, the optimal model is obtained. The experiment with piezoelectric shunt circuit is performed to verify the validity of the optimal model comparing with initial model.

• 전기학회논문지
• /
• 제64권8호
• /
• pp.1262-1268
• /
• 2015

I In power transmission systems, voltage changes continuously as reactive power is whether over supply or shortage. Reactive power produces in generators and consumes in transmission lines, and loads. Voltages at end points of transmission lines rise which is called Ferranti effect. Excessive voltage rising can reduce transmission equipment life, the voltage rising is usually permitted within the limit of 10%~30% excess. Shunt reactors are installed in transmission lines to put a curb on voltage rising. In this paper, we tried to do modelling for shunt reactor configuration types which are no grounding, grounded and grouded neutral reactor. Simulation are carried out for reactor magnitude for compensating transmission line capacitance.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.60-69
• /
• 2011

This paper presents a power quality compensation of the autotransformer-fed railway system using Matlab/SimPowerSystem and especially investigates two installation methods of the shunt active power filter (SAPF) along the autotransformer-fed railway systems; one configuration describes the SAPF installed at the substation and the other is the SAPF at the sectioning post. Also, the novel SAPF control algorithms based on the synchronous reference frame are proposed. A comparative study on two SAPF configurations and the corresponding control algorithms is investigated comprehensively through the case study.

• Journal of Power Electronics
• /
• 제6권3호
• /
• pp.195-204
• /
• 2006

This paper presents a new compensating system, consisting of series and shunt active filters, for mitigating voltage and current disturbances. The shunt filter is used to compensate for unbalanced and distorted load currents. The series filter comprises two inverters, used to suppress voltage disturbances and handle source currents independently. This configuration is devised to reduce the overall cost of active compensators by using low-frequency high-current switches for the latter inverter. The filters are controlled separately using a novel control strategy. Since voltages at the point of common coupling contain interharmonics, conventional methods cannot be used for extracting voltage references. Therefore, voltage references are obtained from generated sinusoidal waveforms by a phase-locked loop. Current references are detected based on rotating frame vector mapping. Simulation results are presented to verify the system.

• 한국전자파학회논문지
• /
• 제16권9호
• /
• pp.957-963
• /
• 2005

본 논문에서는 TSMC 0.25 ${\mu}m$ CMOS RF-Mixed mode 공정 기술을 이용하여 초고속 광통신 시스템의 수신부에 사용되는 광대역 transimpedance amplifier를 설계하였다. 특히 광대역을 구성하기 위해 cascode와 common-source 구조에 active inductor shunt peaking을 이용하여 설계 및 제작하였으며, 측정 결과 gain 변화 없이 -3 dB 대역폭 특성이 cascode는 0.8 GHz에서 $81\%$ 증가한 1.45 GHz, common-source는 0.61 GHz에서 $48\%$ 증가한 0.9 GHz 결과가 나왔으며, 전체 파워 소비는 바이어스 2.5 V를 기준으로 37 mW와 45 mW이며, transimpedance gain은 61 dB$\Omega$과 61.4 dB$\Omega$을 얻을 수 있었다. 그리고 input noise current density도 상용 TIA와 거의 비슷한 $5 pA/\sqrt{Hz}$와 $4.5 pA/\sqrt{Hz}$를 가지며, out put Return loss는 전 대역에서 -10 dB 이하의 정합 특성을 보였다. 그리고 전체 chip 사이즈는 $1150{\times}940{\mu}m^2$이다.

• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.103-111
• /
• 2014

This paper investigates the output powers of PV modules by predicting three unknown parameters: reverse saturation current, and series and shunt resistances. A theoretical model using the non-uniform physical parameters of solar cells, including the temperature coefficients, voltage, current, series and shunt resistances, is proposed to obtain the I-V characteristics of PV modules. The solar irradiation effect is included in the model to improve the accuracy of the output power. Analytical and Newton methods are implemented in MATLAB to calculate a module output. Experimental data of the non-uniform solar cells for both serial and parallel connections are used to extend the implementation of the model based on the I-V equation of the equivalent circuit of the cells and to extend the application of the model to m by n modules configuration. Moreover, the theoretical model incorporates, for the first time, the variations of series and shunt resistances, reverse saturation current and irradiation for easy implementation in real power generation. Finally, this model can be useful in predicting the degradation of a PV system because of evaluating the variations of series and shunt resistances, which are critical in the reliability analysis of PV power generation.