• Industrial Engineering and Management Systems
• /
• v.8 no.3
• /
• pp.148-154
• /
• 2009

In recent days, large-sized flat-panel display (FPD) has been increasingly applied to computer monitors and TVs. Mura defects, appearing as low contrast or non-uniform brightness region, sometimes occur in manufacturing of the Thin-Film Transistor Liquid-Crystal Displays (TFT-LCD). Implementation of automatic Mura inspection methods is necessary for TFT-LCD production. Various existing Mura detection methods based on regression diagnostics, surface fitting and data transformation have been presented with good performance. This paper proposes an efficient Mura detection method that is based on a regression diagnostics using studentized residuals for automatic Mura inspection of FPD. The input image is estimated by a linear model and then the studentized residuals are calculated for filtering Mura regions. After image dilation, the proposed threshold is determined for detecting the non-uniform brightness region in TFT-LCD by means of monitoring the every pixel in the image. The experimental results obtained from several test images are used to illustrate the effectiveness and efficiency of the proposed method for Mura detection.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.7
• /
• pp.752-759
• /
• 2013

This paper presents a method for analyzing and designing an extremely miniaturized planar ring hybrid, using the combination of parallel and diagonally shorted coupled lines. In contrast to conventional miniaturized coupled line filters, it is proven that the required electrical length of transmission line can be largely reduced to even a few degrees, not only effectively suppressing the spurious passband but also approximately maintaining the same characteristic around the stable center frequency. A ring hybrid filter at center frequency of 1 GHz was fabricated on the FR4 epoxy glass cloth copper-clad plat (CCL) PCB substrate. The insertion loss of a ring hybrid filter with the die area of $30mm{\times}30mm$ is -4.68 dB. Simulated results are well agreed with the measurements.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.8 no.1
• /
• pp.53-59
• /
• 2002

Public health centers have been the primary healthcare facilities for the public since 1946 in Korea. But architectural studies on health centers have been insufficient. The purpose of this study is to understand the current situation of public health centers and to collect the data of spatial composition of public health centers. And the research data collected might be utilized for planning of public health centers.

• Journal for History of Mathematics
• /
• v.26 no.5_6
• /
• pp.323-328
• /
• 2013

The Division Algorithm is known to be the fundamental foundation for Number Theory and it leads to the Euclidean Algorithm and hence the whole theory of divisibility properties. In JiuZhang SuanShu(九章算術), greatest common divisiors are obtained by the exactly same method as the Euclidean Algorithm in Elements but the other theory on divisibility was not pursued any more in Chinese mathematics. Unlike the other authors of the traditional Chinese mathematics, Zhu ShiJie(朱世傑) noticed in his SuanXue QiMeng(算學啓蒙, 1299) that the Division Algorithm is a really important concept. In [4], we claimed that Zhu wrote the book with a far more deeper insight on mathematical structures. Investigating the Division Algorithm in SuanXue QiMeng in more detail, we show that his theory of Division Algorithm substantiates his structural apporaches to mathematics.

• Journal for History of Mathematics
• /
• v.32 no.6
• /
• pp.301-313
• /
• 2019

This paper briefly examines the Book of Changes that is the philosophical background of East Asian ancient mathematics and its collection of complementary(ShíYì), and then examines the structure and contents of GyeSaJeon, which explains the basic principles of Book of Changes as one of ShíYì. GyesaJeon reveals the unique East Asian thought of dealing with numbers in the process of explaining the formation of Eight-Gwae(Bagua) and Sixty-four-Gwae based on Yin-Yang theory. It understands numbers in terms of symbols, not quantitative, and use them to represent characteristics or hierarchy of certain classes, and to explain certain principles. Based on this, the implications of using East Asian mathematics history in the mathematics classroom are discussed.

• Computers and Concrete
• /
• v.18 no.5
• /
• pp.937-950
• /
• 2016

This study applied autoclave expansion and heat curing to accelerate the hydration of concrete and investigated how these methods affect the expansion rate, crack pattern, aggregate size effect, and expansion of electric arc furnace oxidizing slag (EOS)-containing concrete. An expansion prediction model was simulated to estimate the expansion behavior over a long period and to establish usage guidelines for EOS aggregates. The results showed that the EOS content in concrete should range between 20% and 30% depending on the construction conditions, and that coarse aggregates with a diameter of ${\geq}4.75-mm$ are not applicable to construction engineering. By comparison, aggregates with a size of 1.18-0.03 mm resulted in higher expansion rates; these aggregates can be used depending on the construction conditions. On Day 21, the prediction model attained a coefficient of determination ($R^2$) of at least 0.9.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.89-93
• /
• 2000

The oxidation of methane was carried out in six different configurations of plasma reactors in order to study the radical reactions inside and outside of the plasma zone and to explore the method to control them. Various radicals and reactive molecules, such as CH, $CH_{2}$, $CH_{3}$, H, and O(from $O_{2}$) were generated in the plasma. A variety of products were produced through many competing reaction pathways. Among them. partial oxidation products were usually not favored, because the intermediates leading to the partial oxidation products could be oxidized further to carbon dioxides easily. It is important to control the free radical reactions in the plasma reactor by controlling the experimental conditions so that the reactions leading to the desired products are the major pathways.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.144-148
• /
• 2000

A modification of the sol-gel method to obtain phase pure superconducting oxides is described. The method starts from organic salts of yttrium, barium and copper, such as acetates, and avoids the sudden and uncontrollable decomposition of the organic fraction which occurs if nitrates are used as starting materials. The aqueous solution obtained with citric acid in an alkaline medium is concentrated under vacuum. The solid so prepared is decomposed at about $300^{\circ}C$ thus giving an oxide precursor containing well dispersed yttrium, barium and copper. Pyrolysis at 850 - $920^{\circ}C$ followed by oxygen annealing gives the superconducting orthorhombic 123 phase. The results of TGA/DTA of the precursor, as well as XRD, electrical and magnetic property measurements on the pyrolysis products are presented and discussed.

• Interaction and multiscale mechanics
• /
• v.1 no.4
• /
• pp.411-422
• /
• 2008

Atomistic simulation of nanoindentation with spherical indenters was carried out to study dislocation structures, mean contact pressure, and nanohardness of Au and Al thin films. Slip vectors and atomic stresses were used to characterize the dislocation processes. Two different characteristics were found in the induced dislocation structures: wide-spread slip activities in Al, and confined and intact structures in Au. For both samples, the mean contact pressure varied significantly during the early stages of indentation but reached a steady value soon after the first apparent load drop. This indicates that the nanohardness of Al and Au is not affected by the indentation depth for spherical indenters, even at the atomistic scale.

• Proceedings of the Korea Contents Association Conference
• /
• 2015.05a
• /
• pp.383-384
• /
• 2015

경제의 발전과 함께 서적의 장정 디자인 면에서도 더욱더 많은 민족적 요소들이 도입되고 있다. 특히 팝업 북 서적의 장정 디자인일 경우에는 그림자극의 조형 요소를 많이 차용하고 있다. 그림자극의 조형 요소들은 색채, 이미지, 조각 등의 측면에서 광범위하게 사용될 수 있다. 본고는 팝업 북 서적 장정 요소들의 창의적 사용을 연구하고 팝업 북 서적 장정에서의 그림자극 예술조형의 응용 과정을 분석하고 문헌조사를 통하여 분석과 연구를 진행하고자 한다. 팝업 북 서적은 이런 방식을 통해 책의 내용을 더욱 실감나게 전달하며 독자를 감동시킬 수 있고 또 주제를 간략하게 요약하여 독창적인 디자인을 보여줄 수 있다. 본고는 민족적 특색이 짙은 그림자극 예술요소의 사용 현황과 향후 발전 가능성을 모색해보고자 한다.