• Journal of Korean Physical Therapy Science
• /
• v.6 no.1
• /
• pp.897-903
• /
• 1999

Many out patients of the rehabilitation center complaint a pain caused by suffering of MPS, and it brings many different kind of social and ecinomical problems such as medical expenses and the reduction in work efficiency. Therefore, we conducted a research to present a fast and effective treatment to the MPS patients. this research was conducted from November, 1996 to January 1998 with eighteen outpatients who agreed to be the subjects to our reserach. We applied the electric acupuncture on 28 different trigger point on the patients with mostly muscular-skeletal pain and some tender and radiating pain. After the treatment, VRS, VAS, PRI were used to measure the degree of the pain on the patients third and seventh visits, and following results were found. 1. To apply EAP treatment, we acupunctured 6em-Iong needles on Tps region, then the electrodes of pulse generater pg-306 E.S.T were connected on the top of the needles. the electric acupuncture therapy was conducted for 20 minutes with the intensity of 4hz - 60hz(auto wave). The treated electric intensity was the level at which the patients did not feel discomfort. 2. Thirteen out of the 18 participated patients were in their 30s and 40s(72.2%), showing highest frequency. There were more female than male with the ratio of 1 to 1:2. 3. six out of the participated patients (33.3%) had the pain for less then a week, and the average duration of the pain of the participated patients wear 0.8 years. 4. The pain occured mostly in the upper trapezius by 6 part (21.4%), then in the gluteus medius region by 4 part (14.3%). Many of the patients with the pain in the upper back area accompanied varios kind of the referred pains such as radiculopathy, HIVD and Frozen shoulder. 5. MPS occured more frequently on the right side than left side then left side and it seemed to be due to the frequent use of the right hand. 6. There was almost no difference in the measurement of the intensity of the pain right before and after the EAP treatment. Howerver, there was significant decrease in the numerical values of the VAS, and a little bit of decrease in the numerical values of the PRI after the EAP treatment. 7. Based on the results of this present research, it can be concluded that EAP can be used for the treating the myofascial pain syndrome with promptness and safety in most cases.

• Korean Journal of Health Education and Promotion
• /
• v.22 no.4
• /
• pp.245-256
• /
• 2005

The purpose of this study is to research the situation and related knowledge and behavior of Korean beauty artists on their musculoskeletal disorders and the factors on them. It was researched by questionnaire from March 1 to May 31, 2003, and the subjects were 984 of beauty artists who were working as hair designers, skin care specialists, and make-up artists over 1 year in big cities including Seoul, Daegu, Busan and Gwangju. The analyzation was done by frequency, percentage, $x^2-test$, t-test. The results can be summarized as follows; 1. As for their degree of pain according to part of their body, the highest was shoulder as 88.3%, and next were neck(cervical region) as 83.2%, waist as 77.6%, and wrist(hand) as 71.8%, in order. 2. The level of knowledge on the muscloskeletal disorder was 65.6 points on the basis 100points. As for their level of protective behavior and knowledge on the disorders of musculoskeletal system according to their educational experience, the higher educational level they had the higher knowledge level they showed, as 42.6% of 'high', 30.4% of 'medium', and 27.0% of low; and as for degree of performing the protective behavior, they showed the higher protective behavior level when they had the higher educational level. 3. As for their level of knowledge on disorders of musculoskeletal system according to their general uniqueness as beauty artists, they showed statistical significance on the field of their marriage status, educational degree, specialized field, and numbers of customers they manage; and as for the degree of their protective behavior, they showed statistical significance in the field of age, marriage status, specialized field, and rank in their jobs. 4. The level of protecting behavior on the muscloskeletal disorder was 57.4 points on the basis 100points. As for their degree of pain on each part of their body according to their protective behavior and knowledge on musculoskeletal system, it had statistical significance on their elbows and hips, and the less pain they showed when the higher knowledge they had; it had statistical significance on their neck(cervical region), shoulders, backs, waists, knees and ankles(feet) according their protective behavior, and the less pain they showed when the higher level of protective behavior they did.

• Korean Journal of Ichthyology
• /
• v.31 no.4
• /
• pp.214-221
• /
• 2019

This study suggests basic data for taxonomic research among similar species by observing osteological development of larvae of Hemibarbus longirostris. Newly hatched yolk-sac larvae were 8.10±0.02 mm (n=5) in mean total length, and frontal, parasphenoid, and basioccipital in the cranium were ossified. On the 6 days after hatching, flexion-larvae were 10.9±0.26 mm (n=5) in mean total length, hyomandibular, sympletic, and ectopterygoid in the cranium were ossified. On the 12 days after hatching, post-larvae were 12.2±0.55 mm (n=5) in mean total length, interopercle in operculum region and postclavicle in shoulder girdle bone were ossified. On the 25 days after hatching, post-larvae were 16.1±0.27 mm (n=5) in mean total length, epihyal and interhyal in hyoid arch, two epural in caudal skeleton, interneural processes, and interhaemal processes were ossified. On the 40 days after hatching, juvenile were 27.9±3.74 mm (n=5) in mean total length, all skeletal development completed with hypural bone in the caudal skeleton region fused in three forms (1, 2+3, 4+5).

• Clinics in Shoulder and Elbow
• /
• v.15 no.1
• /
• pp.8-15
• /
• 2012

Purpose: The object of this study was to investigate the difference in torque and pullout strength between the standard anchor insertion (5.0 mm) with a small awl (3.7 mm) and larger anchor insertion (6.5 mm), with a standard awl (5.0 mm) in osteoporotic humeral head. Materials and Methods: The embalmed 24 paired cadaveric shoulders were assigned to either Group A or B. After measuring the bone mineral density (BMD) of the ROI (region of interest) in the humeral head, 5.0 mm suture anchors were inserted using a 3.7 mm awl in Group A1, and the same 5.0 mm anchors were inserted using a 5.0 mm awl in Group A2. The 5.0 mm anchors were inserted using a 5.0 mm awl in Group B1, and 6.5 mm anchors were inserted using a 5.0 mm awl in Group B2. We measured the torques at the time of the anchor insertion and pullout strengths. Results: There was no significant difference in the BMD between the groups. The torque of A1 (20.6 $cN{\cdot}m$) was significantly higher than that of A2 (13.2 $cN{\cdot}m$), and the torque of B2 (20.8 $cN{\cdot}m$) was significantly higher than that of B1(12.1 $cN{\cdot}m$). However, the difference in the increased torque between group A and B was not significant. The pullout strength of A1 (204.2 N) was significantly higher than that of A2 (152.9 N), and the pullout strength of B2 (210.9 N) was significantly higher than that of B1 (149.5 N). However, the difference in the increased pullout strength between Group A and B was not significant. Conclusion: In severe osteoporosis, the use of a larger suture anchor with a standard awl increased the torque and pullout strength significantly, in comparison to the use of the same sized suture anchor and awl. If there is an inadequate interval between the anchors on the greater tuberosity, the use of a 3.7 mm awl and 5.0 mm anchor will be beneficial compared to that of a 5.0 mm awl and 6.5 mm anchor, considering that an increase in the pullout strength does not depend on the awl size.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.96
• /
• pp.209-223
• /
• 2019

The Iron Seated Buddha sculpture in the National Museum of Korea had long sat unregistered in storage at the museum. However, a new accession number "bon9976" has recently been assigned to it. This sculpture was excavated from the neighborhood of Heungnyongsa Temple in Baekun-ri, Yidong-myeon, Pocheon-gun, Gyeonggi-do Province together with another Iron Seated Buddha sculpture(bon9975) called "Iron Buddha from Pocheon." A comparison and examination of Gelatin Dry Plate and official documents from the Joseon Government-General Museum during the Japanese occupation period have revealed that these two Iron Buddha sculptures were transferred to the Museum of the Government-General of Korea on December 17, 1925. The Iron Seated Buddha sculpture(bon9976) has a height of 105 centimeters, width at the shoulders of 57 centimeters, and width at the knee of 77 centimeters. The Buddha is wearing a robe with rippling drapery folds and the right shoulder exposed. He is seated in the position called gilsangjwa(the seat of good fortune) in which the left foot is placed over the right thigh. The features of the Buddha's oval face are prominently sculpted. The voluminous cheeks, eye sockets in a large oval shape, slanted eyes, short nose, and plump lips can also be found in other ninth-century Iron Seated Buddha sculptures at Silsangsa Temple in Namwon, Jeollanam-do Province, Hancheonsa Temple in Yecheon, Gyeongsangbuk-do Province, and Samhwasa Temple in Donghae-si, Gangwon-do Province. Moreover, its crossed legs, robe exposing the right shoulder, and rippling drapery folds suggest that this sculpture might have been modeled after the main Buddha sculpture of the Seokguram Grotto from the eighth century. The identity of this Iron Seated Buddha can be determined using the Gelatin Dry Plate(M442-2, M442-7). In them, the Buddha has its right palm facing upwards and holds a medicine jar on its left palm. Until now, the Iron Seated Bhaiṣajyagura(Medicine) Buddha(bon1970) excavated from Wonju has been considered the sole example of an iron Medicine Buddha sculpture. However, this newly registered Iron Seated Buddha turns out to be a Medicine Buddha holding a medicine jar. Furthermore, it serves as valuable material since traces of gilding and lacquering clearly remain on its surface. This Iron Seated Buddha sculpture (bon9976) is presumed to have been produced around the ninth century under the influence of Esoteric Buddhism by the Monk Doseon(827~898), a disciple of the Monk Hyecheol, to protect the temple and help the country overcome geographical shortcomings. According to the records stored at Naewonsa Temple(later Heungnyongsa Temple), Doseon selected three significant sites, including Baegunsan Mountain, built "protector" temples, created the Bhaisajyagura Buddha triad, and enshrined them at the temples. Moreover, the inscription on the stele on the restoration of Seonamsa Temple states that Doseon constructed temples and produced iron Buddha sculptures to help the country surmount certain geographical shortcomings. Heungnyongsa Temple is located in Dopyeong-ri, Yidong-myeon, Pocheon-si, Gyeonggi-do Province. This region appears to have been related to rituals directed to the Medicine Buddha since Yaksa Temple(literally, "the temple of medicine") was built here during the Goryeo Dynasty, and the Yaksa Temple site with its three-story stone pagoda and Yaksadong Valley still exist in Dopyeong-ri.

• Korean Journal of Ichthyology
• /
• v.28 no.3
• /
• pp.164-174
• /
• 2016

Tanakius kitaharae and Glyptocephalus stelleri, belonging to the family Pleuronectidae, were very similar in external morphology not only during adult periods, but also during larval periods. In this study, we compared larval development and growth of the two pleuronectids species in detail. Fifty-eight specimens of T. kitaharae larvae and five specimens of G. stelleri larvae were collected from the East Sea, southern Korean Strait, and the adjacent waters of Jeju Island during 2014~2016, and were identified using morphological and molecular markers. Flexion larvae of T. kitaharae (10.23~16.77 mm total length, TL) and G. stelleri (14.33 mm TL) were similar in morphometrics, but can be distinguished by the melanophores in the fin membranes (present in the former vs. absent in the latter), and the melanophores at posterior margin of shoulder girdle (absent in the former vs. present in the latter). Postflexion larvae of T. kitaharae (17.12~24.92 mm TL) and G. stelleri (27.71~32.95 mm TL) differed in the number of melanophores on the mid-lateral caudal region (two in the former vs. five in the latter), and that on the dorsal and anal fin pterygiophores (five or six in the former vs. one row in the latter). Tanakius kitaharae and G. stelleri larvae differed in size at the beginning of metamorphosis. The left eye of T. kitaharae larvae between 23.13~24.92 mm TL reached the dorsal margin of the head while that of G. stelleri larvae between 38.66~42.67 mm TL did not reached yet.

• Journal of agricultural medicine and community health
• /
• v.33 no.1
• /
• pp.82-89
• /
• 2008

Objective:　We compared the prevalence of injury and poisoning in the agricultural and fishery population with that of the general population.Methods: The national health insurance data and agricultufor this study. The age-adjusted standardized morbidity ratio was used to compare the prevalence of all injuries and poisonings of the agricultural and fishery population with that of the general population for the year 2002, as well as the prevalence of certain injuries and poisonings common to the agricultural and fishery population. The age-adjusted standardized morbidity ratio and 95% confidence intervals were attained by using the general population as the standard population group.Results: The age-adjusted standardized morbidity ratio of total injuries and poisonings was significantly high in the agriculture and fishery population. The standardized morbidity ratio was 137.6 in the male agriculture and fishery population and 123.3 in the female agriculture and fishery population. In terms of injuries and poisonings common to the agriculture and fishery population, the age-adjusted standardized morbidity ratio was significantly high regarding the dislocations and strains of lumbar spine/pelvis, shoulder and neck, the fracture of rib/thoracic spine/sternum and pesticide poisoning.Conclusions: The overall prevalence of injury/poisoning was significantly higher in the agriculture and fishery population than in the general population. Various forms of research should be conducted on the injuries of the agriculture and fishery population in the future. In order to compare the differences in the prevalence rates of injuries according to time and region, standard definitions of injuries and occupation related injuries are required.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.511-514
• /
• 1997

The objective of this study is to propose a finite element based design of the dental implant replacing unction and shape of natural teeth. For this, geometric actors were varied to investigate stress distribution of the alveolar bone around dental implant. In this study, the results were obtained based on the theory of linear elastic, with geometrically axisymmetric assumption. Geometric actors determining implant shape are ranged as 0.2mm-0.6mm, 0.04mm-0.1mm, 0.46mm-0.84mm or height of thread, radius of curvature of thread, and pitch, respectively. The stresses in the alveolar bone caused by biting force playa major role in determining implant stability. Especially, the stress concentration in the cortical bone causes bone resorption and finally makes the implant unstable. Therefore, the stress distributions were investigated on the side of the alveolar bone focusing on the area of cortical bone. The maximum von Mises stress was found to increase up to 6% as the height of thread increases, while its value was to decrease to 19% when the radius of curvature increase within the assigned ranges. For the variation of pitch, the larger size of pitch results in greater maximum von Mises stress when the length of the implant under consideration is fixed. The existence of the neck below the shoulder did not affect the stress distribution in the region of alveolar bone. However, the stresses on the side of the implant near the neck were found to be different by 20% approximately. Therefore, the neck can provide the stability of the implant against continuing biting movement. As a conclusion, the finite element based study shows a potential in designing the dental implant systematically.

• Journal of dental hygiene science
• /
• v.10 no.4
• /
• pp.279-286
• /
• 2010

To investigate the correlation between the perceived symptom of musculoskeletal diseases and psychosocial factors in dental professionals in Chungcheong province, a self-administered survey was conducted on 206 dental professionals in Chungcheong province from March 9th, 2009 to March 28th, 2009. SPSS WIN 12.0 software was used to analyze the data and the following results were obtained. 1. As for the perceived symptom degree of musculoskeletal diseases based on measured body parts, the frequency of 'high' was the highest in all the parts of the body. 2. As for gender, females showed higher interest in musculoskeletal diseases than males (p=.000). As for age, subjects ranged 26~30 years showed the highest interest in musculoskeletal diseases, which was statistically significant (p=.000). 3. Work satisfaction showed a positive correlation with the perceived symptom of musculoskeletal diseases in lumbar group and lower extremity group. Work stress showed a weak negative correlation with the perceived symptom of musculoskeletal diseases in lumbar group and lower extremity group. Coworker satisfaction showed a positive correlations with the perceived symptom in upper extremity group and lower extremity group. Hospital satisfaction showed a positive correlations with the perceived symptom in upper extremity group, lumbar group and lower extremity group. Working environment satisfaction showed a positive correlations with the perceived symptom in neck group, shoulder group, upper extremity group and lower extremity group. This study showed a correlation between psychosocial factors and the perceived symptom of musculoskeletal diseases based on body parts. Therefore, psychosocial factors should be considered when the prevention and management program of musculoskeletal diseases are developed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.749-755
• /
• 2016

A new method for measuring the 3-axis cutting forces of a pick cutter by substituting costly 3-D load cells is proposed in this paper. The proposed cutting force measurement method is capable of estimating the 3-axis cutting forces through mechanical constraints using four single-axis compressive load cells and shoulder bolts. The feasibility of the proposed method was verified by finite element analysis, and the accuracy of the force measurement of the developed force measurement device was investigated by conducting linear rock cutting tests. The tests showed that the new cutting force measurement method is able to measure 3-axis cutting forces with a relative error of approximately 6%. These results imply that the new method could be a suitable alternative to conventional 3-D load cells. In addition, it will allow a significant reduction of approximately 20-30% in the costs required for measuring the cutting force when compared to conventional 3-D load cells.