• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.43-43
• /
• 2009

Glenohumeral ligaments play an important role in stabilizing the shoulder. However, it is impossible to know how they function in vivo during shoulder motion. To help elucidate this stabilizing role, we conducted in vivo three-dimensional kinematics of the normal shoulder joint using a markerless bone-registration technique. Magnetic resonance images of 14 shoulder joints of 7 healthy volunteers were acquired for 7 isometric abduction positions between $0^{\circ}$ and $180^{\circ}$. We then calculated three-dimensional shortest paths between the origin and insertion of each ligament based on anatomical study in each abduction position. At $0^{\circ}$ of abduction, the posterior band of the coracohumeral ligament displayed the maximum length. At $30^{\circ}$ of abduction, the superior glenohumeral ligament displayed the maximum length. At $60^{\circ}$ of abduction, the anterior band of the coracohumeral ligament and the middle glenohumeral ligament displayed the maximum length. At $120^{\circ}$ of abduction, the anterior band of the inferior glenohumeral ligament displayed the maximum length. We think that the maximum length of these results is an important influence on the function of the soft tissue stabilizer.

• 한국의류산업학회지
• /
• 제21권2호
• /
• pp.171-178
• /
• 2019

This study analyzed the pressure, subjective wearing comfort, and design preference of brassiere shoulder straps among women in their 20s and 40s. Experimental clothing was made by different shoulder strap designs on a brassiere. In the four designs (A-D), the front attachment points of the shoulder straps were the same, but the back attachment points were different. Three of them (E, E1, E2) were of a halter neck design, with different front attachment positions. The pressures of A-D were measured at the position passing through the shoulder line (P1), and E-E2 was measured at the back neck (P2) as well as at P1. Subjective wearing comfort and design preference were rated on a 7-point Likert scale. A was determined to exert the highest pressure at the neck side of the design in the pressure measurement analysis of A-E2, whereas E1 exerted the lowest. E was measured to have the highest pressure among the E-E2 designs, whereas E2 had the lowest. Participants preferred A the most and E the least in regards to the subjective wearing comfort of A-E. Thus, participants deem A to be the most comfortable despite the high strap pressure. However, E was the most favored design, despite its poor wearing comfort. Participants' subjective impressions of E-E2 were that E2 was the most uncomfortable, but its design was the most preferred. Consumers' design preferences and subjective impressions of wearing comfort did not match.

• PNF and Movement
• /
• 제19권1호
• /
• pp.31-42
• /
• 2021

Purpose: The purpose of this study was to investigate the effect of visual and auditory feedback combined with theraband exercise in rounded shoulder posture. Methods: There were 43 adults with rounded shoulder posture who had a distance of 2.5 cm or more from the posterolateral of the acromion to the table in the supine position that participated. The participants were randomly divided into four groups: those with visual feedback from the lateral view (visual feedback; VFB, n = 11) provided, those with auditory feedback of praise (auditory feedback; AFB, n = 10) provided, those with visual feedback and auditory feedback (visual auditory feedback; VAFB, n = 11) provided, and those without any feedback (control group; CON, n = 11). Theraband exercise with or without feedback was carried out three times per week for three weeks. To confirm the effect of theraband exercise with visual feedback and auditory feedback on pain, range of motion (ROM), posture, and psychological variables were measured before and after exercise in participants with rounded shoulder posture. Results: The VAFB group showed significant differences in pain, ROM, posture, and psychological variables when compared before and after treatment. However, the differences among the VAFB, VFB, AFB, and CON groups were significant in the ROM of abduction, the New York Posture Rating, and the scapular index. Conclusion: In conclusion, theraband exercise combined with visual feedback from the lateral view and auditory feedback by praise improved rounded shoulder posture. Moreover, auditory feedback was more significant statistically than visual feedback.

• Journal of Periodontal and Implant Science
• /
• 제52권2호
• /
• pp.170-180
• /
• 2022

Purpose: This study was conducted to assess the effect of hard and/or soft tissue grafting on immediate implants in a preclinical model. Methods: In 5 mongrel dogs, the distal roots of P2 and P3 were extracted from the maxilla (4 sites in each animal), and immediate implant placement was performed. Each site was randomly assigned to 1 of the following 4 groups: i) gap filling with guided bone regeneration (the GBR group), ii) subepithelial connective tissue grafting (the SCTG group), iii) GBR and SCTG (the GBR/SCTG group), and iv) no further treatment (control). Non-submerged healing was provided for 4 months. Histological and histomorphometric analyses were performed. Results: Peri-implant tissue height and thickness favored the SCTG group (height of periimplant mucosa: 1.14 mm; tissue thickness at the implant shoulder and ±1 mm from the shoulder: 1.14 mm, 0.78 mm, and 1.57 mm, respectively; median value) over the other groups. Bone grafting was not effective at the level of the implant shoulder and on the coronal level of the shoulder. In addition, simultaneous soft and hard tissue augmentation (the GBR/SCTG group) led to a less favorable tissue contour compared to GBR or SCTG alone (height of periimplant mucosa: 3.06 mm; thickness of peri-implant mucosa at the implant shoulder and ±1 mm from the shoulder: 0.72 mm, 0.3 mm, and 1.09 mm, respectively). Conclusion: SCTG tended to have positive effects on the thickness and height of the periimplant mucosa in immediate implant placement. However, simultaneous soft and hard tissue augmentation might not allow a satisfactory tissue contour in cases where the relationship between implant position and neighboring bone housing is unfavorable.

• Clinics in Shoulder and Elbow
• /
• 제27권1호
• /
• pp.88-107
• /
• 2024

The aim of this systematic review was to collect evidence on the following 10 technical aspects of glenoid baseplate fixation in reverse total shoulder arthroplasty (rTSA): screw insertion angles; screw orientation; screw quantity; screw length; screw type; baseplate tilt; baseplate position; baseplate version and rotation; baseplate design; and anatomical safe zones. Five literature libraries were searched for eligible clinical, cadaver, biomechanical, virtual planning, and finite element analysis studies. Studies including patients >16 years old in which at least one of the ten abovementioned technical aspects was assessed were suitable for analysis. We excluded studies of patients with: glenoid bone loss; bony increased offset-reversed shoulder arthroplasty; rTSA with bone grafts; and augmented baseplates. Quality assessment was performed for each included study. Sixty-two studies were included, of which 41 were experimental studies (13 cadaver, 10 virtual planning, 11 biomechanical, and 7 finite element studies) and 21 were clinical studies (12 retrospective cohorts and 9 case-control studies). Overall, the quality of included studies was moderate or high. The majority of studies agreed upon the use of a divergent screw fixation pattern, fixation with four screws (to reduce micromotions), and inferior positioning in neutral or anteversion. A general consensus was not reached on the other technical aspects. Most surgical aspects of baseplate fixation can be decided without affecting fixation strength. There is not a single strategy that provides the best outcome. Therefore, guidelines should cover multiple surgical options that can achieve adequate baseplate fixation.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.105-112
• /
• 2000

본 연구는 치아형성시 shoulder 폭경이 변연 적합도에 미치는 영향을 평가하기 위해 시행하였다. 지대치의 치경부쪽의 shoulder 폭경을 0.6 mm, 0.9 mm, 1.2 mm로 나누어 각각 9개씩, 총 27개의 모형을 제작하여 통법에 따라 In-Ceram 전부 도재관을 제작한 후 시멘트 접착하고 근심, 원심, 협, 설측 중앙 부위를 200배 확대하여 변연 적합도의 측정한 후 각 군과, 측정부위에 따른 변연 적합도 비교해 본 결과 다음과 같은 결론을 얻었다. 1. shoulder 폭경이 0.6 mm인 경우 $81.28{\mu}m$, 0.9 mm인 경우는 $70.78{\mu}m$, 1.2mm 인 경우는 $67.75{\mu}m$의 변연간극을 보였다. 2. shoulder 폭경이 0.6 mm인 경우가 0.9 mm, 1.2 mm인 경우보다 변연간극이 유의한 차이를 크게 나탔났으며(p<0.05), 0.9 mm인 경우와 1.2 mm인 경우는 유의한 차이가 없었다(p>0.05). 3. In-Ceram 시편의 변연부에서 근심측, 원심측, 순측, 설측의 측정위치에 따른 변연적합도의 비교시 유의한 차이가 없었다(p>0.05).

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.265-276
• /
• 2003

The objective of this research is to provide basic data for improving athletic performances, suggesting methods that can be utilized at games and coaching movements in the snatch, by analyzing the level of contribution of muscles to the movements of the snatch lift through three-dimensional imaging and EMG analysis between skilled and unskilled lifters. To this end, three high school students (the skilled group), three middle school student (the unskilled group) were selected; two digital video cameras and electromyography were used. The muscles measured by an EMG include gastrocnemius muscle, biceps femoris muscle, erector spinae, latissimus dorsi muscle, trapezius muscle, and brachioradialis. Based on the Ariel Performance Analysis System (APAS) program, the results of the analysis are summarized as follows. 1. In performing snatch pulls, the skilled lifters were found to simultaneously move the weight centers of the body and the barbell close to vertical, close to the shoulders in the pulling portion; in snatching and grabbing the barbell from a sited position, it was observed that the shorter the time for adjusting to change in the height of the barbell by using rotational inertia, the better it is to perform the movements. 2. The skilled lifters were observed to perform stable and efficient movements in grabbing the bar in a sited position, by moving the barbell and weight center of the body close to vertical and moving the shoulder joint under the bar fast. 3. The results of the EMG analysis of the entire movements from the snatching portion to the portion of grabbing the bar in a sited position show that when the skilled lifters lifted the barbell vertically during the pulling portion, their shoulder joints were extended to put more weight on biceps femoris muscle and brachioradialis; and in snatching and grabbing the bar from a sited position, it was found desirable to increase the myoelectrical activity of erector spinae in order to achieve a balance in the movements of the hip joint between font and rear, as the weight centers of the body and the barbell move higher. On the other hand, the unskilled lifters were found that in response to change in posture, they increase their muscular strength inefficiently in performing the movements throughout the entire lifting process.

• 패션비즈니스
• /
• 제25권3호
• /
• pp.144-158
• /
• 2021

The purpose of this study is to develop a bodice block suitable for women in their 20s with turtle neck syndrome. The problem of turtle neck syndrome body type was derived through the evaluation of bodice blocks. First, the length of the front bodice was longer and the length of the back bodice was shorter. Second, the front neck point, back neck point, and the shoulder line were not in place. Third, the side neck was pushed up. Fourth, the length of armhole was long and it floated. Fifth, the front hem was attached to the body and the back hem was away from the body. A finally developed pattern was designed by developing four test patterns to solve the problem that appeared in a selected bodice pattern, and a t-test was conducted to determine the difference in the appearance evaluation by virtual clothing between the two patterns, bodice block and the development pattern. According to the result, the fit was not good from the side body because the position of the side neck point was not in a place due to the characteristics of the body shape of turtle neck syndrome, but the problems of the anterior neck position, the position of the back neck point, the shoulder line position, and the armhole shape were improved in the developed pattern.

• 센서학회지
• /
• 제31권3호
• /
• pp.156-162
• /
• 2022

This study estimates the relative position between body segments using segment orientation and segment-to-joint center (S2J) vectors. In many wearable motion tracking technologies, the S2J vector is treated as a constant based on the assumption that rigid body segments are connected by a mechanical ball joint. However, human body segments are deformable non-rigid bodies, and they are connected via ligaments and tendons; therefore, the S2J vector should be determined as a time-varying vector, instead of a constant. In this regard, our previous study (2021) proposed a method for determining the time-varying S2J vector from the learning dataset using a regression method. Because that method uses a deformation-related variable to consider the deformation of S2J vectors, the optimal variable must be determined in terms of estimation accuracy by motion and segment. In this study, we investigated the effects of deformation-related variables on the estimation accuracy of the relative position. The experimental results showed that the estimation accuracy was the highest when the flexion and adduction angles of the shoulder and the flexion angles of the shoulder and elbow were selected as deformation-related variables for the sternum-to-upper arm and upper arm-to-forearm, respectively. Furthermore, the case with multiple deformation-related variables was superior by an average of 2.19 mm compared to the case with a single variable.

• The Journal of Korean Physical Therapy
• /
• 제13권3호
• /
• pp.829-837
• /
• 2001

Using Video Display Terminals(VDT) in the working environment often causes health complaints in the neck and shoulder region. This study was conducted on ten subjects, in order to investigate the change of electromyographic activities in the neck region(sternocleidomastoid muscle, upper trapezius muscle and erector muscle of cervical spine)with regards to the screen height and document holder position. A total of six different conditions of screen height and document holder position were measured during subjects performed a text-entry task for a duration of 10min. The raw EMG signal was transmuted into the root mean square(RMS). Two-way ANOVA for repeated measures was used to analyse the effects of the two factors. As a result, changing the screen height and document holder position has no effect on electromyographic activities in the neck region.