• Title/Summary/Keyword: Shorting

Search Result 96, Processing Time 0.031 seconds

The Effects of Board-Game Therapy on Cognitive Rehabilitation in Patients with Chronic Schizophrenia (정신분열병 환자의 인지 기능 재활에 대한 보드게임 요법의 효과 분석)

  • Youn, Tak;Jeong, An-Soon
    • Korean Journal of Biological Psychiatry
    • /
    • v.13 no.2
    • /
    • pp.82-94
    • /
    • 2006
  • Objectives : In order to explore effects of board-game therapy for cognitive rehabilitation in patients with schizophrenia, we investigated the change of executive cognitive function over a 2-month period of board-game therapy in patients with schizophrenia. Methods : Two groups of chronic schizophrenic inpatients were participated in this study. One group(n=21) were treated with board-game therapy for 2 months and the other control group(n=19) were not treated. For the evaluation of the executive cognitive function, a Wisconsin Card Sorting Test(WCST) was administered before and after the introduction of the board-game therapy. PANSS score change was also evaluated. Result : At the beginning of this study, there was no significant difference in performance of cognitive function tests, demographical data or clinical severity between both patient groups. After 2 months of treatment with the board-game therapy, the board-game therapy group showed significant improvements of executive cognitive function without any significant change of their schizophrenic symptoms. On the contrary, there was no change in control group. Conclusion : This study showed that a board-game therapy is effective for the enhancement of executive cognitive function in patients with chronic schizophrenia. A board-game therapy could be introduced with ease into psychiatric fields, such as inpatients' or outpatients' clinic wards and day hospital. Our result indicates that the board-game therapy is a promising tool for the enhancement of cognitive function, especially executive cognitive function and helpful for cognitive rehabilitation for schizophrenic patients.

  • PDF

Design of a Miniature Wideband H-shaped Microstrip Antenna for WLAN (WLAN용 소형 광대역 H-모양 마이크로스트립 안테나)

  • 이진우;이종철;윤서용;이문수
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.41 no.3
    • /
    • pp.15-20
    • /
    • 2004
  • In this paper, a wideband two-layer H-shaped microstrip antenna for WLAN is designed. To increase the bandwidth of microstrip patch antenna a configuration of stacked type using parastic element is used. Furthermore, to reduce the size of microstrip patch antenna, two techniques are employed . the first one is H-shaped patch type and the second one is that the main radiator and parastic patch are shorted to the ground plane using ten shorting posts. The antenna bandwidth and radiation characteristics are calculated by ENSEMBLE ver. 5.0 simulation software, and compared with the experimental results. Experiment results show that the bandwidth of antenna in 740MHz centered at 5.46㎓(13.5%), which is close agreement with the calculations, 770MHz(13%). Also, the antenna size can be reduced by 71.5% compared with the half wavelength rectangular microstrip antenna using the same substrate at the same frequency.

Broadband Quasi-Yagi Antenna with a Ring-type Balun for Indoor DTV Reception (링형 밸런을 이용한 실내 DTV 수신용 광대역 준-야기 안테나)

  • Lee, Jong-Ig;Yeo, Junho
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.21 no.5
    • /
    • pp.906-912
    • /
    • 2017
  • In this paper, we studied a design method for a broadband 3-element quasi-Yagi antenna (QYA) for indoor digital television (DTV) reception. The proposed QYA employs a novel balun between a microstrip (MS) line and a coplanar strip (CPS) line feeding the driver dipole. The proposed balun is constructed by connecting the end of MS line to CPS line through a shorting pin, and the CPS and ground reflector are connected through a circular ring-type conductor. An antenna, as an design example for the proposed antenna, is designed for the operation in the frequency band of 470-806 MHz for terrestrial DTV. The antenna fabricated on an FR4 substrate with a size of $270mm{\times}150mm$ showed a good performance such as a frequency band of 470-820 MHz for a voltage standing wave ratio < 2, a gain > 4.0 dBi, and a front-to-back ratio > 8.4 dB over the DTV frequency band.

Application of Practical Education Program of Process Technology for Shortening Tool Development Period (금형개발기간 단축을 위한 공정기술의 실무교육 프로그램 적용)

  • Shin, Ju-Kyung
    • The Journal of Korean Institute for Practical Engineering Education
    • /
    • v.2 no.2
    • /
    • pp.61-67
    • /
    • 2010
  • The various designs are preferred as well as IT appliances development of the internet based with consumer needs. It's real that the tool development technology of shortened lead time is also requested for production tool fabrication for the launch of new products. A process technology for shortening tool development period was one of the very important practical education from tooling suppliers related to mold development, and we are in competition with having the three elements of short due date, the quality and the production cost for new products. In this paper, the tooling development education and training program with current product development won't be systematic, and we hope to improve educational training process lacking in the reality and to advance the application model of practical centered education and training program of practical technology ability improvement and process technology improvement for shorting tool development period which can be performed at the workplace substantially.

  • PDF

Comparison of Maximum Phonation Time Associated with the Changes in Vocal Intensity in Patients with Unilateral Vocal Fold Palsy and Sulcus Vocalis (성대마비와 성대구증의 강도 변화에 따른 최대발성지속시간 비교)

  • Choi, Se-Jin;Choi, Hong-Shik;Kim, Jae-Ock;Choi, Yae-Lin
    • Phonetics and Speech Sciences
    • /
    • v.4 no.1
    • /
    • pp.125-131
    • /
    • 2012
  • The patients with incomplete glottic closure have an important feature decreasing the maximum phonation time (MPT) because airflow rate or air leakage is greater than people without voice disorders. Also they can appear a problem in the intensity regulation. This study analyzed MPT difference based on the comfortable intensity and louder intensity and the correlation between MPT and respiration volume of unilateral vocal fold palsy (UVFP) and sulcus vocalis (SV) group. The twenty with UVFP, the 21 with SV, the 21 normal subjects measured MPT in /a/ vowel prolongation task with comfortable intensity and louder intensity and compared analysis by measuring FVC, $FEV_1$, $FEV_1/FVC$ to analyze the correlation between MPT and respiration volume. First, a comparison of MPT according to the intensity between groups is that MPT of the normal group was statistically significant long compared to the patient group in comfortable intensity, but MPT between groups was not statistically significant difference in the louder intensity. Second, an analysis of the correlation between MPT and respiration volume is that this was statistically significant correlation between MPT in comfortable intensity and MPT in louder intensity. But this did not show statistically significant correlation between intensity and respiration volume. This study can be supported the preceding study results deduced that shorting MPT of the patient group compared to the normal group was originated in the problem of laryngeal valving mechanism at the level of vocal folds rather than a problem of respiratory function. Also at the phonation by varying the intensity, the result can deduce that in the case of patient group, the length of MPT had been improved by increasing the glottal closure ratio in the louder intensity. These results can support the theoretical basis that should be applied to the clinicians by varying the intensity at the voice evaluation and voice therapy for the patients with the glottis incompetence.

Numerical Analysis of Warpage Induced by Thermo-Compression Bonding Process of Cu Pillar Bump Flip Chip Package (수치해석을 이용한 구리기둥 범프 플립칩 패키지의 열압착 접합 공정 시 발생하는 휨 연구)

  • Kwon, Oh Young;Jung, Hoon Sun;Lee, Jung Hoon;Choa, Sung-Hoon
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.41 no.6
    • /
    • pp.443-453
    • /
    • 2017
  • In flip chip technology, the conventional solder bump has been replaced with a copper (Cu) pillar bump owing to its higher input/output (I/O) density, finer pitch, and higher reliability. However, Cu pillar bump technology faces several issues, such as interconnect shorting and higher low-k stress due to stiffer Cu pillar structure when the conventional reflow process is used. Therefore, the thermal compression bonding (TCB) process has been adopted in the flip chip attachment process in order to reduce the package warpage and stress. In this study, we investigated the package warpage induced during the TCB process using a numerical analysis. The warpage of the TCB process was compared with that of the reflow process.

Design of a Broadband Quasi-Yagi Antenna for UHF Band (UHF 대역 광대역 준-야기 안테나 설계)

  • Yang, Myung-Gyu;Lee, Yun-Joo;Kwon, Jun-Hyoek;Lee, Chang-Kyun;Lee, Jong-Ig;Yeo, Junho
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2015.10a
    • /
    • pp.939-940
    • /
    • 2015
  • In this paper, a design method for a quasi-Yagi antenna (QYA) suitable for UHF band is studied. Due to the mutual coupling between a coplanar strip (CPS)-fed planar dipole and a conducting strip director placed close to the dipole, the dipole obtains broadband characteristics. A ground reflector improves gain in the lower frequency band, and the antenna size might be reduced by employing a bent reflector. The balun between the CPS line and the microstrip(MS) line is constructed by connecting the end of MS line and the CPS line through a shorting pin. In addition, a ring-type conductor connects the CPS line and reflector. The effects of various geometrical parameters and balun on the antenna characteristics are examined. An antenna, as an design example for the proposed antenna, is designed for the operation in the frequency band of 470-806 MHz for terrestrial DTV.

  • PDF

Quality Characteristics of Soy Sauce Braised Shiraegi with Baknig Powder (베이킹파우더 첨가 시래기 간장조림의 품질특성)

  • Kim, Na-Jung;Han, Gui-Jung;Kim, Ha-yun;Han, Hye-min;Park, Bo-Ram
    • Korean journal of food and cookery science
    • /
    • v.31 no.5
    • /
    • pp.676-685
    • /
    • 2015
  • This study tried to develop Siraegi by boiling it down in soy seasoning sauce with excellent sensory attributes and evaluate the quality characteristics in order to enhance the value of traditional agricultural products, dried radish leaves. Sugar content of the seasoning sauce were finally established at 30% (w/v) compared with the starch syrup, which was added to the sauce through sensory evaluation among four groups, 0%, 30%, 60% and 100%. The texture (breaking strength) of Siraegi which was boiled for 30 minutes in water with baking powder was reduced by showing softening effect ranging from 7.6% to 42.1% as the amount of added baking powder was increased. The color of braised Siraegi produced with prepared a seasoning sauce and different content of baking powder, the brightness significantly decreased with an increase of baking powder. The reduction effects of breaking strength ranged from 25.6% to 43.9%, resulting a significant difference. The pH of braised Siraegi with a seasoning sauce significantly increased from 5.71 to 6.04 as the amount of added baking powder was increased, while its acidity was decreased. Sensory evaluation showed significant values for hardness and toughness as the values dropped when compared with the control (p<0.001), and overall acceptability of the group with adding 0.2% baking powder was best (p<0.001). In conclusion, baking powder could be considered as softening agent shorting the cooking time and improvement of the acceptability. Furthermore, it was expected that the newly developed soy sauce barised Siraegi using the dried radish leaves would be successfully utilized by side dishes in the food preparation industry.

A study on the design of an Dual Inverted-F Internal Antenna for the WLAN`s Band (WLAN대역의 듀얼 역-F형 내부 안테나 설계에 관한 연구)

  • Kang, Jeong-Jin;Kang, Seo;Jeung, Seung-Il;Kim, Wan-Sik;Lee, Jong-Arc
    • Journal of IKEEE
    • /
    • v.7 no.2 s.13
    • /
    • pp.223-229
    • /
    • 2003
  • In this thesis, the characteristics of an inverted-F antenna for the 2.4GHz and 5.8GHz zwirless local area network(WLAN) have been analysed in terms of the variation of design parameters. The antenna can be integrated on WLAN for notebook printed circuit board, and the characteristics in terms of the variation of the gap between feed line and shorting stub, gap between antenna's leg and ground plane, antenna leg's width, substrate's height and dielectric constant are analysed. By using these characterization plot of design parameter, the tuning techniques are proposed to design optimum antenna. The designed antenna has 170MHz, 500MHz frequency bandwidth ,VSWR is 1.6, 1.14 and 3.5dBi gain.

  • PDF

Residual Voltage Reduction of Coaxial Surge Arrestor Using Ceramic Filler (세라믹 필터를 이용한 동축 서지어레스터의 잔류전압 저감)

  • Eom, Ju-Hong;Cho, Sung-Chul;Lee, Tae-Hyung;Lee, Young-Chul
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.21 no.2
    • /
    • pp.46-53
    • /
    • 2007
  • Extension of the mobile communication and the rapidly developing services connected with wireless multimedia(W-CDMA, DMB, Wibro, and so on) need great many base station transceiver systems, antennas, and many signal transmission line to embody these services. The min communication appliances system is exposed always in danger of transient overvoltage by direct stroke or induced lightning surge flowing in through antenna because the antenna of base station transceiver system or relay equipment is combined with expensive communication network equipments through signal transmission line. Now, gas discharge tube(GDT) or narrow band stub arrestor which is used by the surge protector for communication use is exposing limitations as for lightning surge protective means of the communication facility with high speed and wide frequency band. Therefore, for improving performance of surge arrestor, we applied ceramic filter which can reduce lightning surge invading from antenna effectively, and proved that ceramic filter is effective in residual voltage reduction through the experimental research.