• Title/Summary/Keyword: Short grain

Search Result 334, Processing Time 0.025 seconds

Surface Modification and Heat Treatment of Ti Rod by Electro Discharge (전기방전에 의한 Ti rod의 열처리 및 표면개질 특성에 관한 연구)

  • Byun, C.S.;Oh, N.H.;An, Y.B.;Cheon, Y.W.;Kim, Y.H.;Cho, Y.J.;Lee, C.M.;Lee, W.H.
    • Korean Journal of Materials Research
    • /
    • v.16 no.3
    • /
    • pp.168-172
    • /
    • 2006
  • Single pulse of 2.0 to 3.5 kJ from $150{\mu}F$ capacitor was applied to the cp Ti rod for its surface modification and heat treatment. Under the conditions of using 2.0 and 2.5 kJ of input energy, no phase transformation has been occurred. However, the hardness and tensile strength decreased and the elongation increased after a discharge due to a slight grain growth. By using more than 3.0 kJ of input energy, the electro discharge made a phase transformation and the hardness at the edge of the cross section increased significantly. The Ti rod before a discharge was lightly oxidized and was primarily in the form of $TiO_2$. However, the surface of the Ti rod has been instantaneously modified by a discharge into the main form of TiN from $TiO_2$. Therefore, the electro discharge can modify its surface chemistry in times as short as $200{\mu}sec$ by manipulating the input energy, capacitance, and discharging environment.

Comparative Study on the Runoff Process of Granite Drainage Basins in Korea and Mongolia

  • Tanaka, Yukiya;Matsukura, Yukinori
    • The Korean Journal of Quaternary Research
    • /
    • v.17 no.2
    • /
    • pp.79-84
    • /
    • 2003
  • This study revealed the differences in runoff processes of granite drainage basins in Korea and Mongolia by hydrological measurements in the field. The experimental drainage basins are chosen in Korea (K-basin) and Mongolia (M-basin). Occurrence of intermittent flow in K-basin possibly implies that very quick discharge dominates. The very high runoff coefficient implies that most of effective rainfall quickly discharge by throughflow or pipeflow. The Hortonian overlandflow is thought to almost not occur because of high infiltration capacity originated by coarse grain sized soils of K- basin. Very little baseflow and high runoff coefficient also suggest that rainfall almost does not infiltrate into bedrocks in K-basin. Flood runoff coefficient in M-basin shows less than 1 %. This means that most of rainfall infiltrates or evaporates in M-basin. Runoff characteristics of constant and gradually increasing discharge imply that most of rainfall infiltrates into joint planes of bedrock and flow out from spring very slowly. The hydrograph peaks are sharp and their recession limbs steep. Very short time flood with less than 1-hour lag time in M-basin means that overland flow occurs only associating with rainfall intensity of more than 10 mm/hr. When peak lag time shows less than 1 hour for the size of drainage area of 1 to 10 km2, Hortonian overland flow causes peak discharge (Jones, 1997). The results of electric conductivity suggest that residence time in soils or weathered mantles of M-basin is longer than that of K-basin. Qucik discharge caused by throughflow and pipeflow occurs dominantly in K-basin, whereas baseflow more dominantly occur than quick discharge in M-basin. Quick discharge caused by Hortonian overlandflow only associating with rainfall intensity of more than 10 mm/hr in M-basin.

  • PDF

Functional Red Pigment Production in Solid-state Fermentation of Barley by Monascus sp. EBE1. (보리를 이용한 Monascus sp. EBE1 고상발효에 의한 기능성 적색 색소 생산)

  • 조창현;서동진;우건조;강대경
    • Microbiology and Biotechnology Letters
    • /
    • v.30 no.3
    • /
    • pp.253-257
    • /
    • 2002
  • The time-dependent changes of red pigments production in solid-state plant scale fermentor using barley cultured with Monascus sp., instead of rice which was traditionally used, were investigated in this study. A steady increase in the yield of red pigments in barley occurred between the 3rd and 6th days. The optimized conditions (inoculation volume = 6∼8%, initial pH = 6, air supply = 0.6∼0.8 m) promoted the production of red pigments. Short-time steaming of barley (< 20 min) decreased fungal growth and pigments production due to the insufficient gelatiniza-tion. The optical density of the red pigments under the optimized conditions was 120 at 500 ]nm per gram of barley. In addition, the metabolites from the fermented barley with Monucus sp. showed antibacterial effects against Escherichia coli and Salmonella typhimurium. Barley was shown to be one of the best grain sources for solid-state fermentation with Monascu sp., fur obtaining natural pigments and also functional food materials.

Microstructure and Magnetic Property of Y-Ba-Cu-O Samples Prepared by Multiseeding

  • Jee, Young A.;Kim, Chan-Joong;Han, Sang-Chul;Kim, Sang-Jun;Hong, Gye-Won
    • 한국초전도학회:학술대회논문집
    • /
    • v.9
    • /
    • pp.363-368
    • /
    • 1999
  • Y-5a-Cu-O superconductors were prepared by TSMG (Top-Seeded Melt Growth) process with multiseeding technique. By using several seeds at the same time, large samples could be fabricated in a short time with simple heat treatment. However, the samples fabricated by normal multiseeding technique show the rapid decrease of trapped magnetic field value across the grain boundaries because of the residual liquid layer. To remove the residual liquid layer, modified multiseeding was newly suggested. The individual grains were combined as single domain, and did not show deterioration of magnetic property at the boundary. The formation mechanism of a well-combined domain by multiseeding technique was discussed.

  • PDF

IRAS OBSERVATIONS OF DARK GLOBULES

  • Lee, H.M.;Hong, S.S.;Kwon, S.M.
    • Journal of The Korean Astronomical Society
    • /
    • v.24 no.1
    • /
    • pp.55-70
    • /
    • 1991
  • Infrared emission maps are constructed at 12.5, 25, 60, and $100{\mu}m$ for dark globules B5, B34, B133, B134, B361, L134 and L1523 by using Infrared Astronomical Satellite data base. These clouds are selected on the basis of their appearance in Palomar print as dark obscuring objects with angular sizes in the range of 3 to 30 arcminutes. The short wavelength(12.5 and $25{\mu}m$) maps show the embedded infrared sources. We found many such sources only in B5, B361 and B34 regions, Diffuse component at 12.5 and $25{\mu}m$, possibly arising from the stochastically heated very small dust grains(a < $0.01{\mu}m$) by interstellar radiation field, is found in B361 and L1523 regions. Such emission is characterized by the limb brightening, and it is confirmed in L1523 and in B361. Infrared emissions at the long wavelengths(60 and $100{\mu}m$) are due to colder dusts with temperature less than 20 K. The distribution of color index determined by the ratio 60 to $100{\mu}m$ intensities shows monotonic decrease of dust temperature toward the center. The black body temperature determined from these ratios is found to lie between 16 and 23 K. Such temperature is possible for small(i.e., $a\;{\lesssim}\;0.01{\mu}m$) graphite grains if the grains are mainly heated by interstellar radiation field. Thus IRAS 100 and $60{\mu}m$ emissions are arising mainly from small grains in the colud. The distribution of such dust grains implied from the emissivity distributions at 100 and $60{\mu}m$ resembles that of isothermal sphere. This contrasts to earlier findings of much steeper distribution of dusts contributing visible extinction. These dust grains are mainly larger ones(i.e., $a{\simeq}0.1{\mu}m$). Therefore we conclude that the average grain size increase, toward the cloud center.

  • PDF

Microstructure Development of Spark Plasma Sintered Silicon Carbide with Al-B-C (Al-B-C 첨가 탄화규소의 스파크 플라즈마 소결에 의한 미세구조 발달)

  • Cho, Kyeong-Sik;Lee, Kwang-Soon;Lee, Hyun-Kwuon;Lee, Sang-Jin;Choi, Heon-Jin
    • Journal of the Korean Ceramic Society
    • /
    • v.42 no.8 s.279
    • /
    • pp.567-574
    • /
    • 2005
  • Densification of SiC powder with additives of total amount of2, 4, 8 $wt\%$ Al-B-C was carried out by Spark Plasma Sintering (SPS). The unique features of the process are the possibilities of a very fast heating rate and a short holding time to obtain fully dense materials. The heating rate and applied pressure were kept at $100^{\circ}C/min$ and 40 MPa, while the sintering temperature and holding time varied from 1700 - $1800^{\circ}C$ for 10 - 40 min, respectively. The SPS-sintered specimens with different amount of Al-B-C at $1800^{\circ}C$ reached near-theoretical density. The $3C{\rightarrow}6H,\;15R{\rightarrow}4H$ phase transformation of SiC was enhanced by increasing the additive amount. The microstructure of SiC sintered up to $1750^{\circ}C$ consisted of fine equiaxed grains. In contrast, the growth of large elongated grains in small matrix grains was shown in sintered bodies at $1800^{\circ}C$, and the plate-like grains interlocking microstructure had been developed by increasing the holding time at $1800^{\circ}C$. The grain growth rate decreases with increasing amount of Al-B-C in SiC starting powder, however, the both of volume fraction and aspect ratio of large grains in sintered body increased.

Synthesis of Solution-Processed Cu2ZnSnSe4 Thin Films on Transparent Conducting Oxide Glass Substrates

  • Ismail, Agus;Cho, Jin Woo;Park, Se Jin;Hwang, Yun Jeong;Min, Byoung Koun
    • Bulletin of the Korean Chemical Society
    • /
    • v.35 no.7
    • /
    • pp.1985-1988
    • /
    • 2014
  • $Cu_2ZnSnSe_4$ (CZTSe) thin films were synthesized on transparent conducting oxide glass substrates via a simple, non-toxic, and low-cost process using a precursor solution paste. A three-step heating process (oxidation, sulfurization, and selenization) was employed to synthesize a CZTSe thin film as an absorber layer for use in thin-film solar cells. In particular, we focused on the effects of sulfurization conditions on CZTSe film formation. We found that sulfurization at $400^{\circ}C$ involves the formation of secondary phases such as $CuSe_2$ and $Cu_2SnSe_3$, but they gradually disappeared when the temperature was increased. The formed CZTSe thin films showed homogenous and good crystallinity with grain sizes of approximately 600 nm. A solar cell device was tentatively fabricated and showed a power conversion efficiency of 2.2% on an active area of 0.44 $cm^2$ with an open circuit voltage of 365 mV, a short current density of 20.6 $mA/cm^2$, and a fill factor of 28.7%.

Nutritional Situation in Korea (한국인영양(韓國人營養)의 현황(現況))

  • Ju, Jin-Soon
    • Journal of Nutrition and Health
    • /
    • v.1 no.1
    • /
    • pp.37-42
    • /
    • 1968
  • According to the dietary surveys and national food balance sheets, the dietary state of person living in Korea is ingesting a high level of grain and vegetable diet and very low animal sources. The daily calory intake is about 2,300-2,600 Cal. per head in which a total protein intake is 69-86 gm respectively. These data indicate no shortage of calory and total protein intake. However, the intake of animal protein is only 4-11 gm and the fat is 8-18 gm, both of which are far below the requirment. The low fat intake brings about a low level of fat soluble vitamins, and that V-A intake is as short as the half amount of the allowance. Riboflavine is also about a half of dietary requirment. Both thiamin and ascorbic acid intake are sufficient. The calcium intake is 0.26-0.5 gm per day which is inadequate. In fact, biochemical findings through field survey show; serum protein 6.7 gm, hemoglobin 13.1 gm and hematocrite 41.5% all of which are lower than the Kwon's report. The serum V-A and uunrinary riboflavin value are also lower than the Williams'es report. Clinically, inflamation of the eyes, cheilosis, pathological signs of tangue, xerosis of the hand and arm, or the like are frequently seen. On the other hand, there is no suitable diet available for the weaning infant and delayed weaning is a common practice. A school lunch program is still in an early stage of development. Another example can be cited that the Korean infant grows faster than the Japanese until one year of age, and no difference is noted between the Korean and the American infants up to six monthes of age, thereafter the former lags in the growth rate. This might be mainly due to the nutritional reasons as mentioned above, and in part due to the high inidence of intestinal parasitism and others.

  • PDF

Holocene paleoenvironmental changes in the Lake Khuvsgul, Northern Mongolia (몽골 북부 흡수굴호의 홀로세 동안의 고환경 변화)

  • Orkhonselenge, A.;Kashiwaya, K.;Ochiai, S.;Krivonogov, S.K.;Nakamura, T.
    • The Korean Journal of Quaternary Research
    • /
    • v.22 no.1
    • /
    • pp.28-36
    • /
    • 2008
  • The present study has focused on the environmental changes and evidences for sedimentation in the Lake Khuvsgul catchment during the Holocene period, inferred from short core sediment (BO03) from the eastern shore of Borsog Bay, which were analyzed in order to review records of the Holocene climatic evolution and Holocene history in Northern Mongolia. For the purpose of reconstruction of natural phenomenon that occurred in the lake catchment system during the Holocene, physical and chemical properties including HCl-soluble material, biogenic silica, organic matter and grain size distribution of minerals in the core sediments have been analyzed in this study. The vertical variations in composition for these properties show distinctly that five lines of paleoenvironmental evidence occurred in the lake catchment during the Holocene. A modified age model resulting from AMS carbon dating for the BO03 core sediment shows timings of these environmental events at 9.5 Kyr BP, 8.0 Kyr BP, 5.6 Kyr BP and 3.2 Kyr BP, respectively. Paleoenvironmental changes in the Lake Khuvsgul catchment system during the Holocene highlight distinctive features of the hydrological regime and geomorphologic evolution in the lake catchment due to regional landscape and global climatic changes corresponding with the Holocene optimum and thermal optimum. In particular, the change of hydrologic regime based on the sedimentological evidence has been caused by not only overland flow due to melting water, but also base flow due to thick permafrost around Khuvsgul region.

  • PDF

Determination of the Optimum Tillers in Different Rice Cultivars for High Yield (다수확을 위한 벼품종군별 적정 분벽경수의 결정)

  • Jae Duk, Kim;Benito S, Vergara
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.38 no.2
    • /
    • pp.103-111
    • /
    • 1993
  • A greenhouse experiment was conducted to determine the number of optimum. tillers within a plant for high yield and to clarify the morpho-anatomical characteristics of cultivars having different tillering abilities. Optimum tillers, i.e tillers which produced heavy panicles were found to be around five to nine tillers per plant, although wider range may be possible if more cultivars were tested or under different growth conditions. Optimum tillers emerged within a short time after transplanting as compared with the other tillers. They exhibited longer tiller duration, produced more spikelets and had better filled spikelets, more vascular bundles and were taller with larger leaf area. However, the 1, 000 grain weight and fertility varied with cultivars and showed no general trend. Of this morpho-anatomical features, the total number of spike lets per plant was considered as the potential criterion for determining the optimum tiller number.

  • PDF