• 방송공학회논문지
• /
• 제27권7호
• /
• pp.974-984
• /
• 2022

In this paper, we introduce the minimum and maximum distance setting methods used in geometric distance attenuation processing, which is one of spatial sound reproduction methods. In general, sound attenuation by distance is inversely proportional to distance, that is 1/r law, but when the relative distance between the user and the audio object is very short or long, exceptional processing might be performed by setting the minimum distance or the maximum distance. While MPEG-I Immersive Audio's RM0 uses fixed values for the minimum and maximum distances, this study proposes effective methods for setting the distances considering the signal gain of an audio object. Proposed methods were verified through simulation of the proposed methods and experiments using RM0 renderer.

• 한국환경과학회지
• /
• 제25권6호
• /
• pp.799-815
• /
• 2016

In this study, according to the reference setting based on the runoff video of 9:00 where the highest water level of 3.94 m has been recorded during the runoff of Cheon-mi Stream in Jeju Island by the attack of Typhoon no. 16 Sanba on September $17^{th}$, 2012, the error rate of long-distance and short-distance velocimetry and real-distance change rate by input error have been calculated and the input range value of reference point by stream has been suggested. In the reference setting process, if a long-distance reference point input error occurs, the real-distance change rate of 0.35 m in the x-axis direction and 1.35 m in y-axis direction is incurred by the subtle input error of 2~11 pixels, and if a short-distance reference point input error occurs, the real-distance change rate of 0.02 m in the x-axis direction and 0.81 m in y-axis direction is incurred by the subtle input error of 1~11 pixels. According to the long-distance reference point setting variable, the velocity error rate showed the range of fluctuation of at least 14.36% to at most 76.06%, and when calculating flux, it showed a great range of fluctuation of at least 20.48% to at most 78.81%.

• 한국산학기술학회논문지
• /
• 제12권6호
• /
• pp.2691-2697
• /
• 2011

본 논문은 대학교 육상단거리 선수와 태권도 선수의 근력, 근 파워를 비교하기 위하여 등속성 근력검사기기를 이용하여 기초체력, 슬관절의 근력($60^{\circ}$/sec), 근 파워($180^{\circ}$/sec)를 분석하여 육상 단거리 선수와 태권도 선수의 근기능 특성을 밝히고자 하는데 목적으로 수행되었다. 기초체력은 육상 단거리 선수가 태권도 선수에 비해 높게 나타났으며, 기초체력 중 좌악력과 순발력에서 통계적으로 높게 나타났다. 슬관절의 근력은 육상 단거리 선수가 태권도 선수에 비해 높게 나타났으나, 근 파워에서는 태권도 선수가 육상 단거리 선수에 비해 통계적으로 차이가 높게 나타났다. 이와 같은 결론을 종합해 볼 때, 육상 단거리 선수와 태권도 선수는 근력뿐만이 아니라 순발력을 필요로 하고 있으며, 등속성 근 기능의 측정에서는 태권도 선수는 체중조절을 요구하는 경기의 특성 때문인지 평균파워와 체중당 평균파워에서만 통계적으로 높게 나타났다. 그러므로 차후 연구에서는 각각의 운동 종목별 근 기능을 분석을 하는 것이 필요한 실정이며, 태권도 선수와 유사한 특성을 가진 투기종목에서도 근 기능을 분석하는 연구가 필요 할 것으로 사료된다.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2003년도 춘계 학술발표회 논문집
• /
• pp.31-36
• /
• 2003

Using a short time expansion of the fundamental solution of heat equation by analysis of Wiener functional with the help of Malliavin calculus, we obtain the asymptotic expansion of the mean distance of Brownian motion on Riemannian manifolds.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1294-1303
• /
• 2009

This paper presents a new numerical algorithm for fault discrimination and fault location estimation when occur to arcing ground and arcing line to line on transmission lines. The object of this paper is developed from new numerical algorithm to calculate the fault distance and simultaneously to make a distinction between transient and permanent faults. so the first of object for propose algorithm would be distinguish the permanent from the transient faults. This arcing fault discrimination algorithm is used if calculated value of arc voltage amplitude is greater than product of arc voltage gradient and the length of the arc path, which is equal or greater than the flashover length of a suspension insulator string[1-3]. Also, each algorithm is separated from short distance and long distance. This is difference to with/without capacitance between short to long distance. To test the validity of the proposed algorithms, the results of algorithm testing through various computer simulations are given. The test was simulated in EMTP/ATP simulator under a number of scenarios and calculate of algorithm was used to MATLAB.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.36-39
• /
• 2015

Many studies are being conducted to implement wireless charging, for example, for cellular phones or electronic tooth brushes, via wireless power transmission technique. However, the magnetic induction method had a very short transmission distance. To solve this problem, the team of Professor Marin Soljacic proposed a magnetic resonance system that used two resonance coils with the same resonance frequency. It had an approximately 40% efficiency at a 2m distance. The system improved the low efficiency and short distance problems of the existing systems. So it could also widen the application range of wireless power transmission. Many studies on the subject are underway. In this paper, the superconductor coil was used to improve the efficiency of magnetic resonance wireless power transmission. The resonance wireless power transmission system had a source coil, a load coil, and resonance coils (a transmitter and a receiver). The efficiency and distance depended on the characteristics of the transmitter and receiver coils that had the same resonance frequency. Therefore, two resonance coils were fabricated by superconductors. The current density of the superconductor was higher than that of the normal conductor coil. Accordingly, it had a high quality-factor and improved efficiency.

• 정보처리학회논문지C
• /
• 제14C권5호
• /
• pp.395-402
• /
• 2007

무선센서네트워크는 센서필드안에서 어떤 이벤트를 센싱하는 수많은 센서노드들로 구성된다. 무선센서네트워크에서 이벤트를 인식한 소스노드와 이 값을 처리하는 싱크노드간에 데이터가 전송되며 싱크노드의 이동성을 고려한 에너지 효율적인 라우팅 기법이 필요하다. 본 연구 에서는 데이터패스 템플릿을 이용하여 미리 정해진 방향으로 소스노드로부터의 데이터공고, 싱크노드로부터의 데이터요구 메시지를 전송한다. 다음 단계로 센싱한 데이터를 단거리계산법을 사용하여 싱크노드에게 전송한다. 그리드 개념과 이동성 싱크가 존재하는 센서네트워크에 대한 기존의 TTDD 라우팅 프로토콜과 CBPER 프로토콜을 본 연구에서 제안한 SPDR 프로토콜과 시뮬레이션을 통하여 비교한 결과, 제안된 프로토콜이 기존의 TTDD나 CBPER보다 향상된 에너지 효율성을 가졌음을 보여준다.

• 한국정밀공학회지
• /
• 제24권8호통권197호
• /
• pp.41-49
• /
• 2007

In this paper, we proposed a new ultrasonic distance measurement system with high accuracy and long range. To improve accuracy and enlarge range, the time of flight of ultrasonic is calculated by the period detecting method. In the proposed ultrasonic distance measurement system, the ultrasonic transmitter and receiver are separated but synchronized by RF(Radio frequency) module. The experiment has been implemented from short distance 1m to maximum available distance 30m. And the period detecting method is compared with the conventional threshold level method. Experimental results show the accuracy and range of the distance measurement are improved by this period detecting method.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.91-96
• /
• 2001

Diminishing fare rate to distance is widely applied in transportation field including bus, but the decision method of diminishing rate is not established. The basic concept of diminishing fare rate to distance is that passengers have a benefit according to their travel distance. Furthermore, this can be justified in the standpoint of operator because the cost of long-distance traveller is lower than that of short-distance traveller to make same income. It is essential to introduce diminishing fare rate to distance to decide diminishing rate. We suggested methodologies regarding how to decide diminishing rate on the basis of operator costs.

• Journal of Electrical Engineering and Technology
• /
• 제1권4호
• /
• pp.423-426
• /
• 2006

Distance relays achieve selective tripping by measurement of all short circuit fault conditions inside set reaches. The direction of the fault, forward or reverse is commonly determined with a dedicated measurement to ensure selectivity under all conditions. For the direction decision (measurement) a number of alternatives are available. This paper describes a loop selective direction measurement and illustrates by means of a typical fault why this is superior to a non loop selective direction measurement such as that based on negative sequence quantities.